Internet gateway for remote underfloor heating control (RF thermostats only)
JG Underfloor Controls gateway is a mains-powered, compact unit for connecting RF thermostats to the internet via Wi-Fi.
When used with the JG Underfloor Controls app, underfloor heating can be remotely controlled on the go.
Features and benefits
Enables control of thermostats via the internet
Compact mains-powered unit, cable supplied
Indicator lights show status of device
Install anywhere in the system, no hard-wired router connection needed
This JG Underfloor Speedfit mixing valve unit is compatible with the brand's Speedfit underfloor hitting systems.
Product features
Compatible with Speedfit underfloor heating systems
Technical specifications
Brand JG Underfloor
Finish Galvanised
Length (M) 0,29
Length (mm) 290
Material Type Ductile Iron
Range speedfit
Range Name Speedfit
Range Type Wet System Underfloor Heating Valves
Weight 815.00000
Hazardous N
Body Material Ductile Iron
Dimensions (L x W x D) 290 x 220 mm
Material Ductile Iron
Supplier Product Code SPUFH1-H
Type Mixing Valve Unit
WEEE Compliant N
Width (mm) 220
JG Underfloor Angle Ball Valve is a service valve that isolates supply to the underfloor heating (UFH) manifold and control pack.
The ball valve connects the main heating flow and return pipe to the mixing valve, while allowing the supply to the control pack to be safely isolated for maintenance purposes. The angle design allows it to be used in both vertical or horizontal pipe arrangements.
Replacement ball valve for a JG Thermomix Control Pack
Durable DZR brass with nickel plate finish
Angle design for vertical or horizontal pipe arrangements
JG Speedfit push-fit connections for fast and simple install
The JG Underfloor Manifold Connection Kit is designed for connecting multiple JG LowFit or JG Underfloor Manifolds together. It is an ideal solution for larger properties that require multiple loops per room, or when additional underfloor heating (UFH) circuits are required on an existing installation.
The kit is easy to installl and comes complete with sealing washers. Simply remove the blanking plugs from the existing manifold at the end of both flow and return bars. Insert the sealing washer into the connectors and tighten. The additonal manifold can then be connected to the other end, creating further circuits, whilst still using a single JG Underfloor Thermomix Control Kit.
The manifold flow meters will need to be recalibrated after installation on both manifolds to ensure optimum performance.
Connects two JG Underfloor or JG LowFit manifolds
Quick & easy to fit with union connections
Kit contains both adaptors for flow and return bars and sealing washers
JG Underfloor Heating Air Vent automatically discharges any air that may build up within the underfloor heating (UFH) system to eliminate any cold spots within the floor.
An alternative solution to manual bleed valves, the integral float automatically drops to allow any air to be vented from the top of the valve. The vent is easy to install as it simply screws directly into the JG Underfloor Manifold.
Integral float automatically releases air
Durable DZR brass with a nickel plate finish
Suitable for underfloor heating applications only
Sikafloor®-440 Level Fibre Reinforced is a fibre and polymer reinforced, flexible, high strength cement based levelling compound, designed specifically for use with underfloor heating and for application over wooden floors.Once mixed with water, Sikafloor®-440 Level Fibre Reinforced produces a smooth self-levelling compound which dries to a tough flexible finish which may then be overlaid with most common floor coverings or left as a final wearing surface.
JG Underfloor 240v Actuator Valve opens or closes the flow of water to an individual underfloor heating (UFH) circuit on the manifold and is controlled by a thermostat or programmer.
It also allows for independent pipe loop control via the thermostat when wired to a JG Aura wiring centre.
240v circuit actuator valve
Suitable for underfloor heating applications only
JG Underfloor floor clips screw easily into the insulation to secure 15mm pipe, they are best installed using a JG Underfloor fixing tool.
Secure pipe fixing floor clips
Screw down 15mm pipe clips
JG Underfloor Manifold Elbow Connector is used to install a pump pack and manifold at 90º to each other.
Nickel plated
90ºC angle
For use with JG Underfloor control pack and manifolds
Suitable for underfloor heating applications only
Makita DTR181 LXT Rebar Tying Tool for tying underfloor heating cables and rebars. Its also compatible with thick rebars (D22 x D25). Easy-to-use, single-handed operation allows positioning of rebars. Tie wire reel can be replaced simply by opening the reel cover. Fitted with a brushless motor which is maintenance-free and provides long-life. A battery protection system automatically shuts off power when the battery level is low. With XPT (Extreme Protection Technology), engineered for improved dust and water resistance for operation in harsh job site conditions. Comes as a Bare Unit, NO battery or charger supplied.
The John Guest Speedfit 15mm 7 Port UFH Manifold is designed for efficient underfloor heating systems. This manifold allows for easy distribution of water to multiple heating circuits, ensuring optimal performance and comfort.
High-Quality Construction: Made from durable materials for long-lasting use.
Easy Installation: Designed for quick and straightforward setup.
Versatile Application: Suitable for various underfloor heating systems.
Efficient Water Distribution: Ensures even heating across all ports.
Compact Design: Space-saving design fits easily into any installation area.
