The DEWALT DCK2052H2 POWERSTACK Twin Kit, contains the following: 1 x 18V DCD999 XR XRP Combi Drill with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and can unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm.No Load Speed: 0-500/1,500/2,250/min.Impact Rate: 38,250/bpm.Max. Torque: 67Nm.Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm.Weight: 1.6kg (without battery). 1 x 18V DCF850 XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpm.Max. Torque: 205Nm.Weight: 0.9kg. Also supplied with: 1 x DCB1104 Charger, 2 x 18V POWERSTACK Li-ion Batteries 5.0Ah & 1 x TSTAK Heavy-duty Kitbox.
The DEWALT DCK2050E2T XR Brushless POWERSTACK Twin Kit contains the following: 1 x 18V DCD805E2T XR Brushless G3 Combi with an ultra-compact, lightweight design for use in confined spaces. An enhanced pivoting LED positioned on the foot offers greater visibility in dark and confined spaces. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Chuck: 13mmNo Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpmMax. Torque: 90NmCapacity: Steel 13mm, Masonry 13mm, Wood 55mmWeight: 1.3kg 1 x DCF850 XR Brushless Impact Driver with a 3 mode switch for enhanced control. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpmMax. Torque: 205NmWeight: 0.9kg 2 x 18V 2.0Ah Li-ion XR POWERSTACK Slide Batteries. 25% smaller and 15% lighter than the DEWALT DCB183 18V XR 2.0Ah battery, making it easier to use in tight workspaces. Stacked pouch cell battery technology provides a low impedance construction, meaning that the rate of flow of electrons is much higher thanks to the innovative internal pouch battery connectors and electrodes, providing a greater surface area vs a traditional cylindrical battery cell type. It also benefits from superior thermal performance vs cylindrical batteries. This increases battery durability, improves the cycle life and results. Also comes with 1 x TSTAK Kitbox.
DEWALT DWST83529-1 TOUGHSYSTEM 2.0 Drawer Unit with ball bearing drawer sliders for smooth operation and durability. Name panel inserts allow the drawers to be labelled for easy identification of contents. Fitted with strong, ergonomic handles for more comfortable transportation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEM modules to be connected together. These newer style latches are compatible with older TOUGHSYSTEM modules. It also offers half-module compatibility, half-width modules can be connected to the unit. Specification: Max. Load (per drawer) 10kgWidth: 535mmLength: 330mmHeight: 305mm
The DEWALT DWST83541-1 Soft Tool Organiser features multiple pockets for maximum organisation and easy access to tools. Its sturdy, waterproof plastic base enables the bag to stand on its own when placed on the floor and protects bag contents from water, moisture and dirt. Made from 1680 denier ballistic nylon with rivet enforcements. This durable construction provides maximum strength and resistance from wear and tear. Fitted with a padded shoulder strap and rubber carry handle for added comfort. Other features include a metal tape holder, hammer holder and an electrical tape strip. Compatible with DEWALT TSTAKaccessory cases. Can be stacked on these cases for easy transportation. Load Capacity: 10.18kg
The DEWALT TOUGHSYSTEM 2.0 Compact Tool Bag has over 25 pockets, and a front bungee cord allowing vertical storage of power tools, hand tools, and other items. Comfortable and easy to carry thanks to its padded, adjustable shoulder strap. Constructed from durable 1680D fabric which is dirt-repellent. The bag is fitted with a waterproof base, making it ideal for any work environment, and can be stacked with any other TOUGHSYSTEM 2.0 product. Specifications: Max Load: 18kg.Dimensions (L x H): 30 x 38cm.
The DEWALT TOUGHSYSTEM 2.0 Tool Bag features over 50 pockets, and a top bungee cord allowing for vertical storage of large power tools, hand tools, and other jobsite necessities. It can be accessed from any side for maximum convenience. Constructed from durable 1680D fabric which is dirt-repellent. The bag is fitted with a waterproof base, making it ideal for any work environment, and can be stacked with any other TOUGHSYSTEM 2.0 product. Specifications: Max Load: 34kg.Dimensions (L x H): 38 x 33cm.
The DEWALT DS100 TOUGHSYSTEM 2.0 Toolbox features a high-performance IP65 lid seal which is dust-tight and waterjet resistant. It has 10 removeable deep cups (8 single and 2 double) and a clear polycarbonate lid that provides easy visibility to contents without having to open it. The toolbox is fitted with a strong, ergonomic handle and easy close, metal wire front latches for easy one-handed operation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEM modules to be connected together. These newer style latches are compatible with older TOUGHSYSTEM modules. Specification: Size: 370 x 550 x 130mmWeight: 1.2kg
The Bahco BE-9884 ERGO Screwdrivers, in a set of 6, have been developed according to the scientific ERGO process. The high-performance alloy steel blade has been chrome plated and entirely hardened for high protection against corrosion, a long life tool. A black oxide tip provides higher accuracy.A three-component handle provides maximum user comfort. The soft material with ridged surface provides superior grip and greater force transmission. A flat face prevents the screwdriver from rolling away. It is easy to choose the right tip, thanks to the colour-coded handle and permanent symbol on the domed end. This set of 6 contains: 2 x Slotted Screwdrivers: 4.0 x 100mm and 5.5 x 125mm. 2 x Phillips Screwdrivers: PH1 x 75mm and PH2 x 100mm. 2 x Pozidriv Screwdrivers: PZ1 x 75mm and PZ2 x 100mm.
Bahco BAHCOFIT Screwdrivers have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. Their blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification. This set of 5 contains: 5 x TORX Screwdrivers: TX10 x 75mm, TX15 x 100mm, TX20 x 100mm, TX25 x 125mm, TX30 x 150mm
The Panasonic EYC242LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball DetentNo Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpmMax. Torque: 280NmTensile Bolt Capacity: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.
The Makita MAKPAC Case 4 Stacking case with conecting clips, compatible with other makes of case systainer. Has the following dimensions: Length: 396mm.Width: 296mm.Height: 315mm.
The Makita MAKPAC Type 3 Stacking Case with connecting clips that enable the case to be stacked and locked together with other cases from the range. Supplied with the twin pack inlay, specifically formed for individual machines to provide a rigid hold in MAKPAC stacking case. It has the following dimensions: Length: 396mmWidth: 296mmHeight: 210mm
The Makita MAKPAC Case 2 Stacking case with connecting clips, compatible with other makes of Systainer case. It has the following dimensions: Length: 396mmWidth: 296mmHeight: 157mm
The Makita DLX2372TJ Twin Pack contains the following: 1 x 18V DHR242 SDS Plus Hammer Drill has an efficient brushless DC motor that provides higher productivity and a slide chuck for quick and easy SDS Plus bit changes. It offers 3 modes of operation: rotation and hammering, hammering only and rotation only. The unique joint construction suppresses the transmission of vibration to the battery terminals, minimising battery failures. No Load Speed: 0-950/min.Impact Rate: 0-4,700/bpmImpact Energy: 2 joulesCapacity: Concrete 24mm, Steel 13mm, Wood 27mm 1 x 18V DTW300 Brushless LXT Impact Wrench for use in automotive, installation and fabrication trades. Precise fastening control is achieved through the 4-speed power selection switch. Three forward and three reverse rotation auto-stop modes offer increased efficiency when the fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed. Bit Holder: 12.7mm (1/2in)No Load Speed: 0-1,000/0-1,800/0-3,200/min.Impact Rate: 0-1,800/0-2,600/0-3,400/bpmMax. Torque: Fastening 330Nm, Nut Busting 580NmCapacity: High Tensile Bolt M10-M16, Standard Bolt M10-M20Weight: 1.5kg 1 x 14.4-18V DC18RC Compact Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, keeping the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. With 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with: 2 x 18V BL1850 5.0Ah Li-ion Batteries and 1 x Type 4 MAKPAC Connector Case.
The Makita DLX2180TJ Brushless Twin Pack, contains the following: 1 x 18 Volt DHP484 Brushless Combi Drill is fitted with a powerful brushless motor, for increased runtime and power. It has an all metal gear construction with aluminium gear housing and 2 mechanical gears. Speed is controlled via the variable speed trigger and features forward/reverse rotation. The top back of the handle is ergonomically contoured and widened to perfectly fit the users hand. No Load Speed: 0-500/0-2,000/min.Blows Per Minute: 0-7,500/0-30,000/bpm.Torque Settings: 21 + drill.Max Torque Soft/Hard: 30/54Nm.Capacity: Wood: 38mm, Masonry: 13mm, Steel: 13mm.Weight: 1.8kg. 1 x 18 Volt DTD153 Brushless Impact Driver is fitted with an energy efficient brushless motor that uses less energy and provides a longer run time. Speed is controlled via the variable speed trigger and features forward/reverse rotation. Fitted with a one touch sliding chuck for easy bit installation and removal. Its ergonomically designed soft grip handle increases comfort and reduces fatigue. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-3,400/min.Impact Rate: 0-3,600/bpm.Max Torque: 170Nm.Capacity: Machine Screw: M4-M8, Standard Bolt: M5-M16, High Tensile Bolt: M5-M12Coarse Thread Length Capacity: 22-125mm. 1 x 14.4-18 Volt DC18RC Compact Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, which keeps the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. Has 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with 2 x 18 Volt 5.0Ah Li-ion Batteries and 1 x Type 3 MAKPAC Connector Case.
The Makita DLX2145TJ LXT Twin Pack, contains the following: 1 x 18 Volt DHP458 LXT Combi Drill is an extremely compact tool with an overall length of only 225mm, the shortest in its class. It has enhanced dust and drip-proof performance for use in outdoor applications or harsh environments. The machine has a battery fuel gauge and a metal gear box for long life. It has two variable speeds, an electronic brake and an adjustable side handle for extra control during use. No Load Speed: 0-400/0-2,000/min.Blows per Minute: 0-6,000/0-30,000/bpm.Max Torque: 44/88Nm.Torque Settings: 21 + drill.Capacity: Wood: 65mm, Masonry: 16mm, Steel: 13mmWeight: 2.2kg. 1 x 18 Volt DTD152Z LXT Impact Driver has a compact design with an overall length of only 137mm. Although small it is packed with all metal gears and mechanical 2-speed control. The variable speed control trigger with forward/reverse rotation provides control, even in tough applications. It also has a soft grip handle that has been designed to maximise thrust right to the bit. With an electric brake for increased user safety and bright twin LED job lights for working in dark conditions. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,900/min.Impact Rate: 0-3,500/bpm.Max Torque: 165Nm.Capacity: Machine Screw: M4-M8, Standard Bolt: M5-M16, High Tensile Bolt: M5-M12Coarse Thread Length Capacity: 22-125mm. 1 x 14.4-18 Volt DC18RC Compact Li-Ion Charger has a built-in cooling fan system that blows cool air into the battery, which keeps the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. Has 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with 2 x 18 Volt BL1850 5.0Ah Li-Ion Batteries and 1 x Type 3 MAKPAC Connector Case.
The Makita DLX2137PTJ LXT Twin Pack contains the following: 1 x 18V DHP482 LXT Combi Drill is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability. It also features an electric brake and variable speed control trigger. Extremely comfortable to use with its ergonomic soft grip handle and lightweight design. Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpmMax. Torque: 62Nm, Settings: 21 + DrillCapacity: Concrete 13mm, Metal 13mm, Wood 38mmScrew Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm 1 x 36V (2x18V) DHR263 Rotary SDS Hammer Drill offers 3-modes of operation: rotary only, hammer only and rotary hammer. It has a compact design that maintains easy handling and high manoeuvrability. No Load Speed: 0-1,200/min.Impact Rate: 0-4,800/bpmCapacity: Concrete 26mm, Steel 13mm, Wood 32mmWeight: 4.7kg 1 x 14.4-18V DC18RD Twin Port Charger is able to charge two Makita slide style Li-ion and NiMH batteries (with adaptor) at the same time, as fast as DC18RC charges one battery. It has a full charge sound alert and LED charging display. An electronic current limiter provides overload protection. Also supplied with: 4 x 18V 5.0Ah Li-ion Batteries, 1 x Type 3 MAKPAC Carry Case and 1 x Type 4 MAKPAC Carry Case.
The Makita DLX2131TJ Twin Pack contains the following: 1 x 18V DHP482 LXT Combi Drill is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability. It also features an electric brake and variable speed control trigger. Extremely comfortable to use with its ergonomic, soft grip handle and lightweight design. Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpmMax. Torque: 62Nm, Settings: 21 + DrillCapacity: Concrete 13mm, Metal 13mm, Wood 38mmScrew Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm 1 x 18V DTD152 LXT Impact Driver with a compact design, all-metal gears and mechanical 2-speed control. The variable speed control trigger with forward/reverse rotation provides control, even in tough applications. It also has a soft grip handle that has been designed to maximise thrust right to the bit. With an electric brake for increased user safety and bright twin LED job lights for working in dark conditions. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,900/min.Impact Rate: 0-3,500/bpmMax. Torque: 165NmCapacity: Machine Screw M4-M8, Standard Bolt M5-M16, High Tensile Bolt M5-M12Coarse Thread Length Capacity: 22-125mm Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x 18V DC18RC Compact Charger and 1 x Type 3 MAKPAC Connector Case.
The Makita CLX228AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V HP333D 12Vmax CXT Combi Drill with 2 mechanical gears and a variable speed control trigger with both forward and reverse rotation. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. No Load Speed: 0-450/0-1,700/min.Impact Rate: 0-6,750/0-25,500/bpmMax. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mm, Masonry 8mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 4 MAKPAC Connector Case.
The Makita CLX224AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V DF333D 12Vmax CXT Drill Driver with 2 mechanical gears and a variable speed control trigger. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Chuck: 0.8-10mm KeylessNo Load Speed: 0-450/0-1,700/min.Max. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 1 MAKPAC Connector Case.
The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kg 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90º 64mmBlade: 184 x 16mm BoreBevel Capacity: 57° 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 1 x TSTAK™ VI Deep Toolbox (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Mobile Storage with Extendable Handle (175799).
The Teng Tools MD910N 10 Piece Screwdriver Set is supplied in a durable plastic case. The screwdrivers have ergonomically designed two component handles with a hanging hole. Comprising of: 4 x Slotted: 3.0 x 100mm, 5.5 x 75mm, 5.5. X 150mm, 6.5 x 150mm. 1 x Insulated: 3.0 x 100mm. 3 x Phillips: PH0 x 75mm, PH1 x 75mm, PH2 x 100mm. 2 x Pozidriv: PZ1 x 75mm, PZ2 x 100mm.
