The Panasonic EYC241LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill Driver. Automatically adjusts the speed of the drill to the torque being exerted, for optimum efficiency. Tough-Tool IP rated against dirt and dust ingress encountered on site. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one-touch bit holder with a tapering collar design that makes accessory changing quick and simple. Chuck: 6.35mm (1/4in)No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/min.Torque: 26/150/170NmCapacity: Tensile Bolt: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V Li-ion Batteries, 1 x Charger and 1 x Systainer Case.
The Panasonic EYC232LJ Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm KeylessNo Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Also supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.
The Panasonic EYC232LJ Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm KeylessNo Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.
The Panasonic EYC231PN Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm KeylessNo Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one touch bit holder with a tapering collar design that makes accessory changing quick and simple. Chuck: 6.35mm (1/4in)No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/min.Torque: 26/150/170NmCapacity: Tensile Bolt: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V Li-ion Batteries, 1 x Charger and 1 x Systainer Case.
The Makita MAKPAC Type 3 Stacking Case with connecting clips that enable the case to be stacked and locked together with other cases from the range. Supplied with the twin pack inlay, specifically formed for individual machines to provide a rigid hold in MAKPAC stacking case. It has the following dimensions: Length: 396mmWidth: 296mmHeight: 210mm
The Makita MAKPAC Case 2 Stacking case with connecting clips, compatible with other makes of Systainer case. It has the following dimensions: Length: 396mmWidth: 296mmHeight: 157mm
The Makita DLX2372TJ Twin Pack contains the following: 1 x 18V DHR242 SDS Plus Hammer Drill has an efficient brushless DC motor that provides higher productivity and a slide chuck for quick and easy SDS Plus bit changes. It offers 3 modes of operation: rotation and hammering, hammering only and rotation only. The unique joint construction suppresses the transmission of vibration to the battery terminals, minimising battery failures. No Load Speed: 0-950/min.Impact Rate: 0-4,700/bpmImpact Energy: 2 joulesCapacity: Concrete 24mm, Steel 13mm, Wood 27mm 1 x 18V DTW300 Brushless LXT Impact Wrench for use in automotive, installation and fabrication trades. Precise fastening control is achieved through the 4-speed power selection switch. Three forward and three reverse rotation auto-stop modes offer increased efficiency when the fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed. Bit Holder: 12.7mm (1/2in)No Load Speed: 0-1,000/0-1,800/0-3,200/min.Impact Rate: 0-1,800/0-2,600/0-3,400/bpmMax. Torque: Fastening 330Nm, Nut Busting 580NmCapacity: High Tensile Bolt M10-M16, Standard Bolt M10-M20Weight: 1.5kg 1 x 14.4-18V DC18RC Compact Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, keeping the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. With 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with: 2 x 18V BL1850 5.0Ah Li-ion Batteries and 1 x Type 4 MAKPAC Connector Case.
The Makita DLX2180TJ Brushless Twin Pack, contains the following: 1 x 18 Volt DHP484 Brushless Combi Drill is fitted with a powerful brushless motor, for increased runtime and power. It has an all metal gear construction with aluminium gear housing and 2 mechanical gears. Speed is controlled via the variable speed trigger and features forward/reverse rotation. The top back of the handle is ergonomically contoured and widened to perfectly fit the users hand. No Load Speed: 0-500/0-2,000/min.Blows Per Minute: 0-7,500/0-30,000/bpm.Torque Settings: 21 + drill.Max Torque Soft/Hard: 30/54Nm.Capacity: Wood: 38mm, Masonry: 13mm, Steel: 13mm.Weight: 1.8kg. 1 x 18 Volt DTD153 Brushless Impact Driver is fitted with an energy efficient brushless motor that uses less energy and provides a longer run time. Speed is controlled via the variable speed trigger and features forward/reverse rotation. Fitted with a one touch sliding chuck for easy bit installation and removal. Its ergonomically designed soft grip handle increases comfort and reduces fatigue. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-3,400/min.Impact Rate: 0-3,600/bpm.Max Torque: 170Nm.Capacity: Machine Screw: M4-M8, Standard Bolt: M5-M16, High Tensile Bolt: M5-M12Coarse Thread Length Capacity: 22-125mm. 1 x 14.4-18 Volt DC18RC Compact Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, which keeps the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. Has 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with 2 x 18 Volt 5.0Ah Li-ion Batteries and 1 x Type 3 MAKPAC Connector Case.
The Makita DLX2140PTJ Twin Pack contains the following: 1 x 36V (2 x 18V) DHS710 LXT 185mm Circular Saw has a compact and lightweight design with a rear dust exhaust port. Durable but lightweight magnesium die-cast blade case and safety cover. There is a blower function to clear wood dust from the cutting line. The saw is powered by 2 x 18V Li-ion batteries (not supplied) in series, to supply energy to the powerful 36V DC motor drive system. No Load Speed: 4,600/min.Blade: 190 x 20mm BoreMax Cut: @0º 66mm, @45º 49mm and @50º 44mmWeight: 4.7kg 1 x 18V DHP482 LXT Combi Drill features an all-metal gear construction for high transmission durability. Its variable 2-speed, reversible motor, features extreme protection technology (XPT), so it is protected from dust, debris and liquids, providing optimal performance in extreme conditions. It also features twin LED job lights with pre-glow and after-glow functions. Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpmMax. Torque: 62Nm, Settings: 21 + DrillCapacity: Concrete 13mm, Metal 13mm, Wood 38mmScrew Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm 1 x 18V DC18RD Twin Port Charger is able to charge two Makita slide style Li-ion and NiMH batteries (with adaptor) at the same time, as fast as DC18RC charges one battery. The DC18RD can also be used for charging a USB device from the USB port on the front of the unit. It has a full charge sound alert and LED charging display. An electronic current limiter provides overload protection. Charge Times: 2 x 18V 3.0Ah Batteries: 22 min., 2 x 18V 4.0Ah Batteries: 36 min., and 2 x 18V 5.0Ah Batteries: 45 min. Also supplied with: 4 x 18V BL1850 5.0Ah Li-ion Batteries, 1 x Type 4 MAKPAC Connector Case, 1 x Type 3 MAKPAC Connector Case and 1 x Type 2 MAKPAC Connector Case.
The Makita DLX2137PTJ LXT Twin Pack contains the following: 1 x 18V DHP482 LXT Combi Drill is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability. It also features an electric brake and variable speed control trigger. Extremely comfortable to use with its ergonomic soft grip handle and lightweight design. Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpmMax. Torque: 62Nm, Settings: 21 + DrillCapacity: Concrete 13mm, Metal 13mm, Wood 38mmScrew Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm 1 x 36V (2x18V) DHR263 Rotary SDS Hammer Drill offers 3-modes of operation: rotary only, hammer only and rotary hammer. It has a compact design that maintains easy handling and high manoeuvrability. No Load Speed: 0-1,200/min.Impact Rate: 0-4,800/bpmCapacity: Concrete 26mm, Steel 13mm, Wood 32mmWeight: 4.7kg 1 x 14.4-18V DC18RD Twin Port Charger is able to charge two Makita slide style Li-ion and NiMH batteries (with adaptor) at the same time, as fast as DC18RC charges one battery. It has a full charge sound alert and LED charging display. An electronic current limiter provides overload protection. Also supplied with: 4 x 18V 5.0Ah Li-ion Batteries, 1 x Type 3 MAKPAC Carry Case and 1 x Type 4 MAKPAC Carry Case.
The Makita DLX2131TJ Twin Pack contains the following: 1 x 18V DHP482 LXT Combi Drill is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability. It also features an electric brake and variable speed control trigger. Extremely comfortable to use with its ergonomic, soft grip handle and lightweight design. Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpmMax. Torque: 62Nm, Settings: 21 + DrillCapacity: Concrete 13mm, Metal 13mm, Wood 38mmScrew Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm 1 x 18V DTD152 LXT Impact Driver with a compact design, all-metal gears and mechanical 2-speed control. The variable speed control trigger with forward/reverse rotation provides control, even in tough applications. It also has a soft grip handle that has been designed to maximise thrust right to the bit. With an electric brake for increased user safety and bright twin LED job lights for working in dark conditions. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,900/min.Impact Rate: 0-3,500/bpmMax. Torque: 165NmCapacity: Machine Screw M4-M8, Standard Bolt M5-M16, High Tensile Bolt M5-M12Coarse Thread Length Capacity: 22-125mm Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x 18V DC18RC Compact Charger and 1 x Type 3 MAKPAC Connector Case.
The Makita CLX228AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V HP333D 12Vmax CXT Combi Drill with 2 mechanical gears and a variable speed control trigger with both forward and reverse rotation. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. No Load Speed: 0-450/0-1,700/min.Impact Rate: 0-6,750/0-25,500/bpmMax. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mm, Masonry 8mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 4 MAKPAC Connector Case.
The Makita CLX224AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V DF333D 12Vmax CXT Drill Driver with 2 mechanical gears and a variable speed control trigger. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Chuck: 0.8-10mm KeylessNo Load Speed: 0-450/0-1,700/min.Max. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 1 MAKPAC Connector Case.
This Bosch Twin Pack contains the following: 1 x 18V GSB 18-2-LI Plus Professional Combi offers the best price-performance ratio among professional cordless combis in the 18 Volt Class. Ideal for the toughest screwdriving and drilling applications in wood and metal, and for impact drilling applications in masonry. No Load Speed: 0-500/0-1,900/min.Max. Torque: 63Nm, Settings: 20 + 1Capacity: Masonry: 13mm, Steel: 13mm, Wood: 38mmMax. Screw Diameter: 8mmWeight: 1.2kg 1 x 18V GDR 18-LI Light Series Impact Driver has a short, lightweight design for the best handling, especially when working overhead. Fitted with an ergonomic grip for comfortable handling and an integrated LED light for illuminating the dark work areas. Electronic Cell Protection (ECP), protects the battery against overload, overheating and deep discharge. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,000/bpmMax. Torque: 130NmCapacity: Screw Diameter: M4-12 Also supplied with: 2 x 18V 3.0Ah Li-Ion Batteries, 1 x Charger and 1 x L-Boxx Carry Case
The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kg 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90º 64mmBlade: 184 x 16mm BoreBevel Capacity: 57° 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 1 x TSTAK™ VI Deep Toolbox (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Mobile Storage with Extendable Handle (175799).
The Starrett Small Tool Bag is compact and ideal for carrying tools for small jobs. It has 12 external and 6 internal pockets within the main zipped compartment. The zipped compartment provides increased security and ease of storage. Comes with a removable, padded shoulder strap that is reinforced for increased durability.
The Starrett ;Medium Tool Bag has a hard-wearing, ABS plastic reinforced base that is waterproof and durable. It has 7 external and 6 internal pockets in the main zipped compartment. The zipped compartment provides increased security and ease of storage. Comes with a removable, padded ;shoulder strap that is reinforced for increased durability.
The Stanley Cushion Grip screwdrivers with a chrome plated bar which is corrosion resistant, and magnetic tips for easy pick up and screw locator. The soft grip handle provides excellent torque and comfort. It has a smooth domed end for fast spinning action, speed and comfort, and the large diameter handle offers greater torque which is needed for driving wood screws. Screw tip identification is shown on the handle. Contents: 5 x Flared: 3.0 x 75mm (Instrument), 5.0 x 100mm, 6.5 x 45mm (Stubby), 6.5 x 150mm and 8.0 x 150mm. 5 x Pozidriv: PZ0 x 60mm, PZ1 x 75mm, PZ2 x 45mm (Stubby), PZ2 x 100mm and PZ3 x 150mm.
The Stanley 1-97-515 Wheeled Soft Bag is made from a heavy-duty 600 x 600 denier fabric that resists cuts and scratches. The bag has a rigid bulky structure design and removable dividers which are hard wearing, strong and durable. In addition, the extendable easy carriage handle makes it convenient to manoeuvre the bag. It has multiple internal and external pockets for maximum organisation and secure storage of small parts or personal items. It has easy access to tools and provides maximum organisation including drill storage. Specification Dimensions: 460 x 330 x 450mm.
The Stanley Rigid Multi Purpose Tool Bag is constructed from extra tough 600 x 600 denier fabric with a waterproof plastic bottom. Will stand up to all worksite and weather conditions, giving the tool bag a longer life. The reinforced stress points and industrial leather provide extra strength and carry comfort. The Tool bag has a zip top which makes for quick and easy tool access, as it keeps everything in place and at hand for quick access. A rubber pad on strap gives a soft cushioning when transporting around worksites etc. On the side of the tool bag there are large pockets for cables, wrenches etc, and there is a centre pocket with weather flap for mobile phone use etc.
