This Scan Safety sign is made from 1mm self-adhesive durable PVC and printed using UV resistant inks. It should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'No Parking'.
The DEWALT Tool Backpack is made from a combination of durable 1200 denier outer fabric and 600 denier lining for maximum protection. It has a large 40 litre carry capacity and a maximum load of 25kg, so there is plenty of room for tools, accessories and electronic devices. Inside there is a separate padded compartment that is ideal for carrying a laptop, tablet or documents safely. The reinforced, water-resistant base provides increased protection from wear and tear, as well as weather protection. Reinforced, padded shoulder and sternum straps provide additional comfort during transport. There is also a practical luggage strap for attachment to a trolley. Other features include side pockets with the ability to secure long objects and an exterior tape measure holder. Specification: Dimensions: 340 x 470 x 230mmMax. Load Capacity: 25kgStorage Volume: 40 Litres
The Arctic Hayes Carbon Monoxide Alarm Tester Spray is simple and easy-to-use. Designed to test all carbon monoxide alarms and flue gas analysers, as recommended by the fire brigade. Offers up to 7 tests per can.
The Kuny's HM219 Leather Swing Hammer Holder is made from top grain leather and heavy-duty steel. The cradle design keeps the hammer secure whilst the swing feature keeps hammer vertical. Fits belt sizes up to 70mm (2.3/4in) wide.
The Arctic Hayes Smoke Alarm Tester Spray is simple and easy-to-use. Designed to test the sensor in smoke alarms, as recommended by the fire brigade. Offers up to 40 tests per can.
This Stanley Open Tote Tool Bag has a secure, rigid and waterproof base. It comes with a variety of internal and external pockets, to protect valuables from dust and water spills which can easily happen on a job. Large open top allows for easy access as well as more space for larger tools. It has an easy carry handle, and is secure and accessible. Dimensions: 250 x 590 x 290mm
These DEWALT Classic Rigger Safety Boots with full grain leather uppers and a steel toecap that offers protection of up to 200 joules. The comfort insoles, padded ankle and TPU heel support provide comfortable all day wear. Fitted with a durable, Goodyear welted rubber outsole and a steel midsole for underfoot protection. They also feature a padded cuff for additional comfort. EN Test: CE EN ISO 20345-2011.Safety Rating: SBP.Slip Rating: SRA.1 x Pair of DEWALT Classic Rigger Brown Safety Boots UK 11 Euro 45
Scan Foam Latex Coated Gloves are high-visibility orange gloves made of knitted and seamless polyester for excellent comfort. They have black latex wrinkle finish coating on the palm and fingers, which gives excellent grip and flexibility in both wet and dry conditions. The glove has a 13g knitted seamless high visibility polyester liner. Conform to EN420 and EN388 Standards. Abrasion Performance Index (1-4): 2Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 2Puncture Performance Index (1-4): 11 x Pair of Scan Hi-Vis Yellow Foam Latex Coated Gloves Size 10 Extra Large
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear writing and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA1550 safety sign has the following specifications:Size: 200 x 300mmMessage: 'First aid'.
This Scan Safety sign is made from 1mm self-adhesive durable PVC and printed using UV resistant inks. It should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'No Smoking'.
Sets of non-interlocking zinc stencils in a range of sizes. Useful for making signs and marking cartons and packing cases.Letter set contains - 27 pieces consisting A to Z. Letter Size: 2in
The Kuny's 76.2mm (3in) wide padded comfort belt, made from heavy-duty, double layer, lightweight fabric for excellent durability. For comfort, it has foam padding. The belt has a 51mm (2in) double tongue metal roller buckle and a grip strip fastening system that holds pouches securely in place. It will not rot, crack, harden or be affected by mildew. Fits waist sizes: 29in to 46in.
The DEWALT Millington Rigger Boots are completely non-metallic. They have a waterproof, breathable inner lining that helps to eliminate water ingress. A composite toecap and midsole provide increased user protection. The outsole is manufactured using a dual density formula of PU and rubber, giving heat resistance to 300°C. This boot also incorporates an anti-scuff toe guard. Safety Rating: S3-WR-HROSlip Rating: SRC1 x Pair of DEWALT Millington S3 Waterproof Rigger Boots UK 9 Euro 43
The Scan Safety Wellingtons have been specially adapted and are ideal for use in workplaces where resistance to penetration by liquids and hard objects are high priorities. They are made with a high grade blend of PVC and nitrile rubber and are resistant to ISO 6112 chemicals and oils. Anti-static, energy absorbent soles provide comfort, strength, durability and slip resistance. The boots have a steel midsole and their steel toecaps have 200 joule rating. The soles are oil, acid, alkaline, heat (180°C) and penetration resistant. Conform to EN20345-S5 standards.1 x Pair of Scan Safety Wellingtons UK 6 Euro 39
This Scan high-intensity safety sign is made from 1.3mm thick, rigid material. It is printed using UV resistant inks, which resist fading. The background of this sign is photoluminescent, which means that is glows and can be seen in the dark. It is non-toxic, non-radioactive with no lead of phosphorous. The sign is easy to read with clear instruction and illustration. Exceeds PSPA Class 1 classification.Complies with BS5499 and/or ISO 7010 design criteria where applicable. The SCA1584 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Push bar to open'.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA0567 safety sign has the following specifications:Size: 200 x 300mmMessage: 'No smoking. It is against the law to smoke on these premises'.
The DEWALT Laser Safety Hiker Boots have full grain leather uppers with a breathable, waterproof comfort insole for comfortable all day wear. The padded tongue and collar provide additional comfort. Has a 200 Joule steel toecap, with a steel midsole for underfoot protection. The TPU dual density outsole is anti-static. EN Test: CE EN ISO 20345-2011.Safety Rating: S1P.Slip Rating: SRA.1 x Pair of DEWALT Laser Safety Hiker Black Boots UK 10 Euro 44
Moldex EasyLock® Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. adaptors or particulate pre-filters are not necessary. ABEK1 protection against organic [boiling point >65°C] + inorganic gases & vapours, acid gases and ammonia. 10 x Workplace Exposure Limit (Half Mask).20 x Workplace Exposure Limit (Full Face Mask).OR 1000 ppm whichever is lower. Tested and certified to EN 14387:2004+A1:2008.
The Faithfull 15 Pocket Tool Roll is made from a hardwearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sizes of tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. Dimensions: 32 x 77cm NOTE: Tools NOT included.
Made from heavy-duty leather this tool pouch is double stitched for strength and riveted at stress points.Webbing belt is attached and will fit waists from 29in to 46in.Has 10 pockets for tools and nails, tape clip and two hammer loops. Size: 215 mm x 500 mm (8.1/2in x 20in)
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA4252 safety sign has the following specifications:Size: 400 x 600mmMessage: 'Site Office'.
This Scan Hazard sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA4100 safety sign has the following specifications:Size: 400 x 600mmMessage: 'Danger Moving vehicles'.
The Stanley Tools Hammer Holder has a metal hammer loop that is comfortable to reach. Made from professional, high-grade leather (suede) with rivet reinforced stress points and a wide belt slot.
The Scan Safety Wellingtons have been specially adapted and are ideal for use in workplaces where resistance to penetration by liquids and hard objects are high priorities. They are made with a high grade blend of PVC and nitrile rubber and are resistant to ISO 6112 chemicals and oils. Anti-static, energy absorbent soles provide comfort, strength, durability and slip resistance. The boots have a steel midsole and their steel toecaps have 200 joule rating. The soles are oil, acid, alkaline, heat (180°C) and penetration resistant. Conform to EN20345-S5 standards.1 x Pair of Scan Safety Wellingtons UK 9 Euro 43
This Scan safety folding 'A' board sign is made from heavy-duty polypropylene for durability. It has a pre-printed message on both sides and folds flat for easy storage and transportation. It is easy to read with clear writing and illustration. Message: 'Warning Wet floor' Dimensions: 62cm (height) x 30cm (width).
The Scan Chukka Safety Boots are popular with users in the construction, agriculture and engineering industries. They have grained leather uppers that offer excellent resistance against abrasion. With anti-static, energy absorbent polyurethane soles for comfort, strength and durability. The padded ankle collars provide additional comfort whilst the steel toecaps and midsole provide protection. The soles are resistant to oil, acid, alkaline, heat (180°C) and penetration. EN Test: CE EN ISO 20345-2011.Safety Rating: S1P.Slip Rating: SRC.1 x Pair of Scan 4 D-Ring Chukka Black Safety Boots UK 8 Euro 42
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 8 Euro 42
Pair of P3(R) filters for the Trend AIR STEALTH half mask. The twin HEPAC* pleat encapsulated filter design provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above. *High Efficiency Particulate Air Composite
Scan self-adhesive bathroom sign with black text/graphic. Printed using UV resistant inks. Available in a polished brass or polished chrome effect. Please note polished chrome effect signs are not recommended for exterior use. Size: 200 x 50mm.Message: 'Gentlemen'.Polished brass effect self-adhesive bathroom sign with black text/graphic. Printed using UV resistant inks. Size: 200 x 50mm.
Sets of non interlocking zinc stencils. Useful for making signs and marking cartons and packing cases.Number set contains 9 pieces with the 6 being reversible for 9. Size: 1 1/2in Figures.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur The SCA0605 safety sign has the following specifications:Size: 200 x 300mmMessage: 'No parking'.
The Faithfull Chisel Roll is made from a hardwearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sized chisels and small tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. New improved design features wider pockets to fit chisels with or without blade guards. The chisel size is printed on the pocket for easy product selection. NOTE: Tools NOT included.1 x Faithfull 8 Pocket Chisel Roll 33 x 40cm
The DEWALT DWST1-75676 pair of full metal saw horses are fitted with trigger clamps for vertical clamping and V-groove supports for round profiles and pipes. They are highly portable due to their flexible handles for easy transportation and side locking latch, that prevents the unit from opening accidentally. The sturdy metal legs and frame offer a load capacity of up to 900kg and the fitted rubber pads help to create friction on surfaces while cutting. Specification Capacity: 900kg.Depth: 120mm.Height: 1117mm.Width: 135mm.Weight: 11.3kg.
