The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.The Bahco 424P-S6-ROLL Bevel Edge Chisel Set is supplied in a high quality tool roll and contains 1 of each size: 6, 10, 12, 18, 25 and 32mm.
This professional general purpose adjustable Block Plane has a fine grey iron body and is adjustable for depth of cut and alignment. A block plane is designed to cut end grain and is typically small enough to be used with one hand with the cutting blade (also known as an iron) bedded at a lower angle with the bevel up compared against other planes. It is frequently used for paring end grain, possible because its blade had been set at a shallow bed angle. This allows the blade to slice through end grain more efficiently; furthermore, for this to work, the plane is frequently held at an angle sometimes as much as 45° to the direction of travel, so that the cutting edge slices the wood fibers as they pass from one end of the cutting edge to the other. A block plane has many other uses in woodworking, ideal for cleaning up components by removing thin shavings of wood in to make a component fit within fine tolerances. Chamfering (angling square edges) and removing glue lines are some of the other uses woodworkers find for the block plane. Cutter Width: 40mm (1.5/8in).Length: 180mm (7in).
1 x Faithfull FSC Straight Gouge Carving Chisel 9.5mm (3/8in). The Faithfull Straight Gouge Carving Chisel comes with wooden handle, deep seated tang, brass ferrule and fully polished blade. Gouges are designed with a concave blade to remove wood without causing splintering. The depth of the curve or sweep determines the depth-of-cut. This product is made with FSC 100% Certified Wood from well-managed forests.Please Note: Woodcarving chisels will require final sharpening prior to their first use. 9.5mm (3/8in)
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-253 FatMax® Thru Tang Chisel is 10mm (3/8 inch) in width and 125mm in length
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 18mm (3/4in).
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 20mm.
The Faithfull Mitre Box is made from high quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.Ideal for use when cutting picture frame joints and general carpentry work.Box Length: 230mm (9in)Box Width: 115mm (4.1/2in) Capacity
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 18mm.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.The Bahco 24P-S6-PP Bevel Edge Chisel Set is supplied in a high-quality polyester pouch and contains 1 of each size: 6, 10, 12, 18, 25 and 32mm.
The Hultafors OGC r8 Outcannel Carving Gouge is a curved chisel, sharpened on the outside, giving a perfect 8mm radius in one stroke. Sharp, reliable and always at hand, perfect for making cable ditches. The gouge features a high-quality Japanese steel blade with a heavy-duty handle designed to withstand repeated hammer blows. Supplied in a smart holster for easy access at all times. Specifications: Radius: 8mm.Overall Length: 232mm.
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC16 Scandinavian Butt Chisel. Blade: 16mm.Overall Length: 232mm.
These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW850P fluted wood dowels have the following specifications: Pack quantity: 50.Size: 40 x 8mm.
The Faithfull Spoon Chisel Carving Chisel with wooden handle, deep seated tang, metal ferrule and fully polished blade. Spoon shaped chisels are used in place of straight chisels to reach deeper recesses in the wood. This product is made with FSC 100% Certified Wood from well-managed forests. Please Note: Woodcarving chisels will require final sharpening prior to their first use. Specifications: Blade Width: 19mm (3/4in).Overall Length: 220mm.
These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW1035P fluted wood dowels have the following specifications: Pack quantity: 35. Size: 40 x 10mm.
All in one, easy-to-use mitre box. 90° , 45° and 22.5° slots. 300mm length with a patented storage system for the saw.Comes complete with Tenon Saw. Length: 350mm
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Blade Round 250mm (10in)
The Faithfull No.6 Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter width: 60mm (2.3/8in).Overall length: 457mm (18in).
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC6 Scandinavian Butt Chisel. Blade: 6mm.Overall Length: 232mm.
The IRWIN Marples M373 Splitproof Bevel Edge Wood Chisels are ideal for heavy-duty use and have splitproof handles. They are made from best in category steel for improved sharpness and edge retention. The blade, bolster and tang are forged from one piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles that will withstand heavy usage. The handle is also contoured to provide added control.4 Piece IRWIN Marples M373 Splitproof Bevel Edge Chisel Set. Contains the following sizes: 6mm (1/4in), 13mm (1/2in), 19mm (3/4in) and 25mm (1in).
Faithfull Replacement Plane Blade for use with FAIHRPLANE Hand Rasp Plane and similar products from other brands. Suitable for use on all types of wood, aluminium, plastics, fibreglass and laminates. Can also be used for plaster and filler removal. Specification: Blade Size: 255 x 40mm
The Faithfull traditional double pinion hand drill with a keyless 8mm capacity chuck. The handle's end unscrews to allow storage of drill bits. Die-cast wheel and frame with plastic handles.
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB2 bevel edged chisel is blue and has the following dimensions:Blade width: 50mm (2 inch)Blade length: 165mm
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB38 bevel edged chisel is blue and has the following dimensions:Blade Width: 10mm (3/8 inch)Blade Length: 140mm
The Bahco Series 414 bevel edge chisels are a durable multi-purpose chisel, which has been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long lasting performance. Polypropylene handle and with a protective holster includedType: bevel edge. Size: 22mm.
The Faithfull No.4 Smoothing Plane is designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm.This Faithfull No.4 Smoothing Plane is presented in a hinged, wooden storage box.
The Faithfull Block Plane has the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.This Faithfull No.60.1/2 Block Plane is supplied loose, unboxed.
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 16mm (5/8in).
The Faithfull 778 plane is designed to cut rebates up to 38mm (11/2in) and is guided by an adjustable fence supported on two guide rods. The rods can be pushed through which allows the fence to be used on either side of the plane. A twin position cutter enhances the versatility of this plane. The plane features a quality cast iron body with accurately ground base, two position cutter for rebate and bull nose work, a double sided adjustable fence, a spur for cross grain cutting and is supplied with an accurate depth stop. With the cutter in the centre position, the plane can be used for cutting rebates, and has a fine screw adjuster for precise control of the depth of cut. With the cutter moved to the front position, the plane can also be used for cutting into corners (bullnose work). 5-year guarantee.Presented in a hinged wooden box. Cutter Width: 38mm.Overall length: 255mm.
Replacement irons (blades) are available for all Stanley block and specialist planes. All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed. All cutters are fine rotary ground to give a flat surface that is easier to sharpen. G : Denotes suitable for old style planes.To fit 112020 and 112220 Planes 9. 1/2G and 220G. (old style) Cutter Size. 1.5/8in
Hultafors EDC Chisel 25mm and Craftsmen’s knife HVK form the perfect combination, in an easily accessible double holster, made from impact-resistant PP plastic, joined by rivets and hardwearing leather. Japanese steel blades, rust protected by Electrophoretic deposition (EPD). Fitted with heavy-duty handles designed to withstand repeated hammer blows. Specifications: Chisel: 25mm, Length: 232mm.Knife: Length: 208mm.
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC32 Scandinavian Butt Chisel. Blade: 32mm.Overall Length: 232mm.
