These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW1035P fluted wood dowels have the following specifications: Pack quantity: 35. Size: 40 x 10mm.
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.Set of 4 Marples M444 Series Blue Chip Bevel Edge Chisels. Sizes included: 6, 12, 18 & 25mm (1/4, 1/2, 3/4 & 1in).
The IRWIN Record 778 rebate plane has two cutter positions, one for normal rebating work and a forward position for planing into corners and difficult positions.The adjustable fence supplied can be used on either side of the plane to accurately control the size of the rebate.The cast iron body has an accurately ground base.Five thread depth adjusting screws for precision control of shaving thickness. Cutter Width: 38mm (1.1/2 in).Length: 215mm (8.1/2 in).
The Faithfull Soft Grip Wood Chisels are ideal for the professional tradesman or keen DIY enthusiast. Each blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards to ensure that the cutting edge remains sharper for longer. The bevelled edge blade design makes these chisels ideal for cutting into tight corners and for use on fine work. The handles have an anti-slip, soft grip coating for added user comfort and are fitted with a steel striking cap that provides added protection when used with a mallet or an occasional hammer blow. A correctly sharpened wood chisel has a double angle profile. The blade is ground to an angle of 25 degree which increases to 30 degree at the leading edge of the blade (the cutting angle). For complete accuracy use a honing guide (FAIHG) and an oil, diamond or whetstone.This Faithfull Soft Grip Chisel Set is supplied with a chisel roll made from a hard-wearing, nylon-backed polyester with double stitching at stress points and edged for extra strength. Contains 8 pockets for various sized chisels and small tools, and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. This set includes four wood chisels: Sizes: 13, 19, 25 and 32mm
IRWIN Record 060 1/2 Block Plane is specially made to deal with plastic laminates and other man-made materials besides wood. Cutter set at 12.5° with mouth adjustments for coarse or fine work and end grain. Fully adjustable for depth of cut with cutter held firmly by lever and cam. Cutter Width: 42mm (1 5/8 in).Length: 152mm (6 in).
1 X Marples M444 Series Blue Chip Bevel Edge Chisel 50mm (2in). The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-262 FatMax® Thru Tang Chisel is 30mm (1 1/8 inches) in width and 155mm in length
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.This 5 piece Wood Chisel set contains the following sizes: 6mm (1/4in), 13mm (1/2in), 19mm (3/4in), 25mm (1in), and 32mm (1.1/4in). Supplied in a handy storage wallet.
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC12 Scandinavian Butt Chisel. Blade: 12mm.Overall Length: 232mm.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.This 4 piece Wood Chisel set contains the following sizes: 6mm, 13mm, 19mm and 25mm.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 38mm (1.1/2in).
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 19mm (3/4 inch).
The Stanley Dynagrip Chisels have steel striking caps which can be used with a steel hammer for increased force at the point of contact. They also have a longer, soft-grip handle for improved grip and control.Manufactured from forged high carbon steel for strength and durability and pre-sharpened, their blades are ready for immediate use.This 5 piece set plus accessories comprises:5 x Dynagrip Chisels: 6, 12, 18, 25 and 32mm.1 x Oil stone1 x Honing Guide.
The Faithfull FAIDOWKIT10 Dowel Kit contains the following: 1 x brad point drill bit1 x drill stop collar.2 x dowel centre points.1 x hex key.10 x 10 mm fluted dowel pegs.
The Faithfull Dowel Drill stops clamp on to drill bits enabling a hole of the correct depth to be made. Pack of 3 sizes of drill stops - 6, 8, and 10 mm. 2.5mm hex key is required to fit the drill stops (not included).
These Faithfull Centre Points are used for accurate alignment of dowel holes. To use: Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked.The FAIDOWCENT10 Centre Points have the following specifications: Size: 10mm. Pack quanitity: 4.
The Faithfull Carpenters Tool Kit has been specially commissioned to provide the essentials you need for working with wood. All the tools are made to the highest quality from the finest hardwood, brass and steel. The set includes: Traditional No.4 Smoothing Plane60.1/2 Block Plane230mm Try Square230mm Sliding BevelMortice and Marking Gauge They all come with the confidence of a 5-year guarantee. This is a super gift for the professional, enthusiast or apprentice. Presented in a hinged wooden case.
The Faithfull cabinet scraper will produce a fine finish on solid wood and veneers.Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes. The cabinet scraper removes fine shavings from wood to give a very smooth finish. Unlike an abrasive it does not produce dust which can clog the grain. The cut is controlled by finger pressure to bow out the blade, varying the curve and localising the cut.The scraper can be easily re-sharpened with a file and a burr turned with a burnishing tool. Made from C60 Spring Steel. Size: 150mm x 60mm
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mmSet of 3 Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle Sizes included: 12, 19, and 25mm (1/2, 3/4 & 1 in).
This Faithfull Plane Set comes in a wooden storage box and provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x 60.1/2 Block Plane with plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.
These Faithfull woodcarving chisels have wooden handles, deep seated tangs, brass ferrules and fully polished blades. V-Straight parting chisels, such as this one, are used mainly to cut 'V' grooves, outlining letterwork and corner finishing. Please Note: Woodcarving chisels will require final sharpening prior to their first use.The FAIWCARV7 Woodcarving Chisel has the following specifications: Type: V Straight Part Chisel. Blade width: 12.7mm (1/2in).Handle: Hardwood.
The Faithfull No.4 Smoothing Plane is designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm.This Faithfull No.4 Smoothing Plane is supplied loose, unboxed.
The Faithfull planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. The 60.1/2 block plane with a 35mm cutter width, set at a low angle of 13 1/2º making it particularly effective on end grain and plastic laminates. The 9.1/2 block plane with a 42mm cutter width, set at an angle of 21º. Ideal for end grain and general purpose finishing. The Faithfull FAIPLANEBPS 60.1/2 and 9.1/2 block plane set is presented in a hinged wooden box.
The Faithfull 'Jack' planes have a long base and are used for the initial preparation of rough timber. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools.Presented in a fine hinged wooden storage case. Cutter width: 50mm (2in) Overall length: 355mm (14in)
The Faithfull Shoulder Bullnose Rebate Plane is a versatile, 3-in-1 low angle plane, combining the functions of: a shoulder plane with the front extension fitted; a bullnose plane using the small nose section; or a chisel plane with the nose removed. The full width blade also allows use as a rebate plane and is easy to set using the knurled adjustment screw.Presented in a hinged wooden storage box.
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mm1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 16mm (5/8in)
The Faithfull Block Plane has the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.This Faithfull No.60.1/2 Block Plane is supplied loose, unboxed.
The Faithfull No.7 Jointer plane is designed for stock removal and truing long edges or levelling wide boards. The plane features a precision ground base and sides with a traditional hardwood handle and knob for comfort and high quality brass fittings precision machined for accurate adjustment. The plane is suitable for use on both hard and soft woods. Cutter Width: 60mm (2.3/8in).Overall Length: 560mm (22in).
These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW672P fluted wood dowels have the following specifications: Pack quantity: 72. Size: 30 x 6mm.
