V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Box ContainsJQDP254W
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
: V-Plus Module : 2-Way Push-on Push-off Replacement Dimmer Module Kit 60-700W Features: Can be used to replace dimmer modules in existing faceplates or in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft start feature and intelligent overload protection. Dimensions: 64x58x46mm (Click here to see full dimensions) Product Weight (g): 50 Operating Voltage: 220/250V AC Maximum Load Rating: Halogen; 700W Application Advice: Not suitable for motors or fans Varilight Guarantee (years): 10 Price includes VAT.
_V-Plus Module
_2-Way Push-on Push-off Replacement Dimmer Module Kit 60-700W
_Can be used to replace dimmer modules in existing faceplates or in the Matrix dimmer grid system
_V-Plus intelligent dimming technology
_Soft start feature and intelligent overload protection
Mounting frames known as yokes for use with Varilight Power Grid, available in 1,2,3 and 4 gang. Allows switches to be mounted behind the plates.
_Varilight Power Grid frames (1-4 gang)
_Extending flexibility and choice for the Varilight range
_Compliments existing Dimension accessories and Data Grid
_Requires additional Power Grid plate and switches
Mounting frames known as yokes for use with Varilight Power Grid, available in 1,2,3 and 4 gang. Allows switches to be mounted behind the plates.
_Varilight Power Grid frames (1-4 gang)
_Extending flexibility and choice for the Varilight range
_Compliments existing Dimension accessories and Data Grid
_Requires additional Power Grid plate and switches
Specialising in dimmer switches (including LED dimmers for dimmable LEDs), decorative switches, decorative sockets and decorative wiring accessories Varilight have a comprehensive range which now includes our award-winning dimmable CFLs and dimmable transformers. With decorative finishes ranging from contemporary Brushed Steel to classical Georgian Brass we have a finish to suit every design scheme with a variety of faceplate styles available, including Classic bevel-edged and Classic rope-edged faceplates, as well as the minimalist Ultraflat and sophisticated Dimension Screwless ranges. Varilight is the brand name of Doyle & Tratt Products Ltd, the leading British manufacturer of dimmer switches and decorative electrical wiring accessories."
_SKU: YBS.C
_1-Gang
_Colour:
_Plate Style:
_Back Box Depth: N/A
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge face-plate. Suitable for controlling both mains and low voltage lighting.
_Many stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Pewter Effect - Victorian Brass - Brushed Steel
_Three insert colours options - Black - Polished Chrome - White
_Available in 1, 2 or 3 gang options
_Range: Classic
Varilight 10 amps 1 way or 2 way operation rocker switches with curved edge faceplate. Suitable for controlling both mains and low voltage lighting. Rocker switches is available in a insert colour and gang options.
_Available in 1, 2 or 3 gang options
_Three insert colours options: - Black - Steel - White
_Finish: Matt Chrome
_Range: Classic
The Varilight Classic raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_2-Way Rocker Switch
_1-Gang 10A 1- or 2-Way Rocker Switch with Metal Rockers
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Bevelled edge faceplate
The Varilight Value Polar plastic range has a 5mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 85mm x 85mm Double plate size: 85mm x 146mm 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Blank Plate
_Single Blank Plate
_Used to cover unused wall boxes
_Durable white plastic
The Varilight Classic raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Fused Spur
_13A Switched Fused Spur
_Double pole switching
_Holds standard 25.4x6.4mm fuse
_Replaceable 13A fuse included
The Varilight Georgian range has a roped finish on the edge of the plate. Covered by the Varilight 10 year guaranty. Single plate size: 95mm x 95mm. Double plate size: 95mm x 155mm. 13A Plug sockets: Require a 25mm deep wall box. USB sockets are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Blank Plate
_Single Blank Plate
_Used to cover unused wall boxes
_Roped edge faceplate
VARILIGHT switches are designed to meet the latest European Safety Legislation. Flat plate design allowing the products to sit flush to the wall; with ultra-slim front plates this decorative range gives a stunning finish. Our standard switches are suitable for controlling both mains and low voltage lighting. They are also suitable for 1-way or 2-way circuits (where the same lights are controlled by two switches) and rated at 10 amps. If the lights are controlled by three switches then one of the switches in the circuit must be an intermediate switch with four terminals enabling you to link all three switches together.
_2 Gang - 2 Way 10A Light Switch
_Ultra Flat Plate - Polished Brass Finished Plate
_Decorative Inserts
_Flat Plate
_Stylish Modern Design Quick and Simple Installation
Product Features 3 Gang - 2 Way 10A Light Switch Ultra Flat Plate - Brushed Chrome Finished Plate Brushed Chrome Inserts Stylish Modern Design Quick and Simple Installation
_2-Way Rocker Switch
_3-Gang 10A 1- or 2-Way Rocker Switch
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Contemporary, ultra-slim faceplate
Range: Ultraflat. Finish: Polished Chrome (please note the plate is all the same colour, the Varilight images can show lines or shades but this is just a reflection during photography). : 13A Socket. : 2-Gang 13A Double Pole Switched Socket with Metal Rockers. Insert/Rocker Colour: Chrome/Black Inserts. Features: Double pole switching for safer operation. Contemporary, ultra-slim faceplate. Dimensions: 89x149x32mm. Faceplate Depth: 1mm. Product Weight (g): 240. Fixing Centres: 120.6mm. Depth from Mounting Face: 24mm. Recommended Minimum Back Box Depth: 35mm. Operating Voltage: 220/250V AC. Maximum Load Rating: 13A. Varilight Guarantee (years): 10.
_light switch
Varilight Dimension Screw less flat plate power sockets form part of a contemporary range of switches and sockets that is available in a choice of finishes. With many other matching accessories to choose from including the market leading V-Pro range of LED dimmer switches.
_Varilight switched screw less flat plate power socket 13 Amp, 1 or 2 gang
_Finishes: Many to choose from
_Double pole
_Rated at 13 Amp
Only suitable for use with Varilight PowerGrid modules, not suitable for use with other grid modules (different size to MK). Frame/Yolk is not included with plate so you will need to purchase this and the modules separately. Please see Z3PGRID code in bullet points for correct size.
_light switch
Varilight Dimension Screw less flat plate light switch is part of a contemporary range of switches that is available in a choice of finishes. With many other matching accessories to choose from including the market leading V-Pro range of LED dimmer switches.
_Finishes: Brushed Steel, Brushed Brass, Polished Chrome, Polished Brass, Iridium Black, Mocha Brown, Premium Black and Premium White.
_Rated at 10 amp.
_1-Gang
_With 1 way and 2 way operation.
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge faceplate. Suitable for controlling both mains and low voltage lighting.
_Choose stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Victorian Brass - Brushed Steel
_Insert colours options: - Black - Brass - Chrome - Iridium - Steel - White
_Available in 3, 4 or 6 gang options
_Range: Classic
Varilight classic 2 gang single pole 13 amps metal rockers switches and socket with USB charging ports. The USB port detects the device to be charged and optimises its output accordingly to achieve the fastest possible charging speed.
_Choose stylish plate finish options: - Mirror Chrome - Iridium Black - Satin - Victorian Brass
_Insert colours options: Black or White
_Metal Switches
_2 Gang
Varilight 1-Gang 20 amps double pole rocker switch with neon indicator light. Rocker switches is available with insert colour options.
_Three insert colours options: - Black - White
_Finish: Mirror Chrome
_1-Gang
_Double Pole
Varilight 1-Gang 20 amps double pole rocker switch with bevelled edge faceplate. Rocker switches is available in a decorative finishes with insert colour options.
_Choose stylish finishes options: - Mirror Chrome - Iridium Black - Victorian Brass
_Three insert colours options: - Black - Iridium - White
_1-Gang
_Double Pole
Varilight V-Pro high wattage LED dimmer module that can dim up to 300W of LED load without needing to re-rate. Supplied as a module that can be used to retrofit onto existing dimmer switch plates. Ideal for use when higher loads are required.
_Max wattage: 300W
_Will dim up to 30 LED lights
_Contains trailing edge V-Pro dimming technology which can reprogrammed to emulate leading edge mode but isn't TRIAC.
_Smoother, silent dimming operation, no buzzing.
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LEDlamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on thelink in the product description below.
_V-Pro dimmer are suitable for dimmableLEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs,GU10 and mains halogen
_Fits a 25 mm wall box
Varilight is the brand name of Doyle & Tratt Products Ltd the leading British manufacturer of dimmer switches and decorative switches and sockets supplying the UK retail market, the trade and OEMs. The launch of Varilight's international range has enabled the company to establish a presence in other European markets, the Middle East and Africa.
_Back Box Depth: 25mm
_Remote can be purchased seperately
_Gang: 1
_Measurements: 88mm:88mm:27mm
_Plate Style: Classic
