Durable heavy-duty I-Beam aluminium level with 1 x fixed horizontal vial and 1 x 180° rotating vial top easy to read centre vial. The horizontal vial can be viewed from both side and above for ease of use. Shock absorbing end caps and pipe groove for use on rounded surfaces. 2 vials. Accurate to ± 1.5mm/1m.Length 800mm (32 in)
Durable heavy-duty I-Beam aluminium level with 1 x fixed horizontal vial and 1 x 180° rotating vial top easy to read centre vial. The horizontal vial can be viewed from both side and above for ease of use. Shock absorbing end caps and pipe groove for use on rounded surfaces. 2 vials. Accurate to ± 1.5mm/1m.Length 600mm (24 in)
Durable heavy-duty I-Beam aluminium level with 1 x fixed horizontal vial and 1 x 180° rotating vial top easy to read centre vial. The horizontal vial can be viewed from both side and above for ease of use. Shock absorbing end caps and pipe groove for use on rounded surfaces. 2 vials. Accurate to ± 1.5mm/1m.Length 400mm (16 in)
This professional general purpose adjustable Block Plane has a fine grey iron body and is adjustable for depth of cut and alignment. A block plane is designed to cut end grain and is typically small enough to be used with one hand with the cutting blade (also known as an iron) bedded at a lower angle with the bevel up compared against other planes. It is frequently used for paring end grain, possible because its blade had been set at a shallow bed angle. This allows the blade to slice through end grain more efficiently; furthermore, for this to work, the plane is frequently held at an angle sometimes as much as 45° to the direction of travel, so that the cutting edge slices the wood fibers as they pass from one end of the cutting edge to the other. A block plane has many other uses in woodworking, ideal for cleaning up components by removing thin shavings of wood in to make a component fit within fine tolerances. Chamfering (angling square edges) and removing glue lines are some of the other uses woodworkers find for the block plane. Cutter Width: 40mm (1.5/8in).Length: 180mm (7in).
The Stanley Sweetheart 12-137 No62 Low angle Jack plane is made from extra thick 3/16in A2 steel for superior edge retention, a one-piece precision ground frog and base casting, and a limited lifetime warranty. The Stanley No. 62 is 63mm wide by 350mm long with a 50mm wide blade thats installed bevel up without a cap iron. Jack planes with bevel-up irons are among the most useful planes because they can be used in place of a jointer plane on short boards, and for smoothing. The front knob and tote are genuine American Cherry for user comfort with Norris type adjustment for ease of use and adjustable throat plate for different types of wood. A Stanley Tradition since 1843 - Stanley reintroduces their Sweet Heart logo with a new line of premium hand planes. If you're a woodworker, finding an old Stanley tool with their Sweet Heart logo is like finding a treasure, and many consider these hand planes to be the best of the best.
The Stanley 12-136 Sweetheart Premium No.4 bench plane is a great choice for woodworking projects of all types and sizes. The base and frog cast as one to allow the plane to run smoothly over the stock with little to no chatter and a heavier body for increased performance. The precision machined base is flat to .003in and the blade is made of A2 steel for increased edge retention and has a patented lateral adjustment locking feature, solid brass adjustments for smooth operation and cherry wood FSC wooden handles give you the control you need to achieve accurate results every time. Length 250mm Cutter width@ 50mm Originally used in 1915 to honor their company president, the Stanley Sweetheart logo quickly became synonymous with some of the most sought after and cherished hand tools on the market. Stanley proudly introduces the release of a new line of Sweetheart hand tools beginning with the 12-136 Sweetheart No. 4 Smoothing Bench Plane.
A manually adjustable general purpose Block Plane. Ideal for the occasional user or DIY'er for a range of light-duty applications. Cutter Width: 40 mm (1.5/8in).Length: 180 mm (7in).
A manually adjustable general purpose Block plane. Ideal for model makers, craft applications and light-duty jobs. Cutter Width: 35 mm (1.3/8in).Length: 140 mm (5.1/2in).
This rebate plane is made from fine grey iron with all working surfaces accurately machined for precise results. Two cutter positions for regular and bull nose work. The cutter is adjustable for depth of cut in the rear position. To accurately control dimensions of the rebate, an adjustable fence depth gauge is supplied. A cutting spur is also provided for cross grain work. Cutter Width: 38mm (1.1/2in).Length: 250mm (10in).
Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length. 10.1/4in.Cutter Width. 2.3/8in.
The Jointer plane performs a dual role between stock removal and accurately truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seating to reduce chatter. Length: 560 mm (22in).Cutter width: 60 mm (2.3/8in).
The Bailey Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seatings to reduce chatter. It also has a special cap iron design which curves shavings and prevents clogging. Cutter width: 60 mm (2.3/8in).Length: 460 mm (18in).
The Bailey Jack plane is designed for rapid stock removal when preparing timber prior to finishing. Machined frog and cutter seatings to eliminate blade chatter. Unbreakable plastic handles and special cap iron design which curves shavings and prevents clogging. Length: 355 mm (14in).Cutter width: 50 mm (2in).
Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length: 9.3/4in Cutter width: 2 inch
Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length 9.1/2in.Cutter width 1.3/4in. - 45mm
The Stanley 3 Piece Plier Set made from heat treated carbon steel forged pliers, with ground heat treated cutting edges that produce durability and accuracy when cutting. They have comfort grip handles and polished heads. Contains: 1 x 152mm Slip Joint Plier.1 x 152mm Long Nose Plier.1 x 254mm Waterpump Plier.
Heat treated carbon steel forged pliers, with ground heat treated cutting edges that produce durability and accuracy when cutting. They have comfort grip handles and polished heads.Set of 3 contains:-Slip joint plier - 152 mm.Long nose plier - 152 mm.Diagonal cutting plier - 152 mm.
The Stanley Quick Vice has a sliding jaw and a one handed lever arm, allowing quick and easy opening, closing and repositioning. It has a steel construction for durability and long life. Removable rubber pads help to protect the workpiece, and screw threads allow tightening to the work surface for a secure grip. Specification Clamping Force: 160kg.Bar Length: 240mm.Clamping Capacity: 110mm.Throat Depth: 80mm.
The Stanley 0-70-450 plastic pipe cutter cuts up to 28mm plastic pipe and can also be used for hose, conduit and edge trim. The Stanley plastic pipe cutter has the following features:Precision stainless steel blade;Durable moulded resin body.
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No.2 Phillips.Length: 25mm x 1/4-inch hex.Pack quantity: 3.
The Stanley 0-68-010 Multibit Ratchet Screwdriver features a patented bit storage system for ease of visibility, access and security. It also has a spring loaded, hard wearing, ball bearing indexing mechanism for quick and easy access. The magnetic bit holder provides a quick, secure changeover of standard 1/4in bits and a top quality patented, 3-position, audible, ratcheting mechanism (forward, reverse and fixed) for life long efficiency. Stanley have used the most up to date materials in their screwdrivers. The tri-lobular, bi-material handle with textured finish will give users maximum torque on any type of screw with the minimum of effort. The screwdriver is supplied in a unique holder which contains 4 bits in addition to the 6 bits held in the screwdrivers' integral storage magazine. In total, it is supplied with 10 bits to suit a variety of purposes. Contains: 3 x 25mm Phillips Bits: PH1, PH2(2). 3 x 25mm Pozidriv Bits: PZ1, PZ2(2). 2 x 25mm Slotted Bits: 3mm, 6mm. 2 x 25mm Torx® Bits: TX10, TX15.
The Stanley 0-66-358 Ratchet Stubby Screwdriver comes with 6 x 1/4in hexagonal bits, which are stored in the screwdrivers removable end cap for quick and easy bit changes on different screw types. It has an easy to use ratchet mechanism with screw and unscrew direction twist action handle. The bi-material handle is comfortable to use and provides added torque and easy access to bit storage, while the magnetic bit holder ensures that bits are held securely in when in use. Ideal for all tight or restricted screwdriving applications around the home, office or work site. 2 x Flared: 5mm, 6mm.2 x Phillips: PH1, PH2.2 x Torx: TX15, TX20.
The Stanley Precision Moulding Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim, thus reducing material damage. The contoured bar makes pulling, prying and lifting easier1 x Stanley Precision Moulding Pry Bar 250mm (10in)
The Stanley Precision Moulding Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim, thus reducing material damage. The contoured bar makes pulling, prying and lifting easier1 x Stanley Precision Moulding Pry Bar 200mm (8in)
The Stanley Precision Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws allow for precision nail pulling and prying and the contoured bar makes pulling, prying and lifting easier. They are ideal for heavy-duty demolition work.1 x Stanley Precision Pry Bar Claw 250mm (10in)
The Stanley 0-54-925 Ratchet Screwdriver Set is ideal for all trades or DIY job applications, as it is well equipped with all the most common sockets and screwdriver bits for small jobs. Ideal for mechanics, model making, general garden/appliance repairs and lots lots more. Contents: 1 x Stanley Ratchet Screwdriver. 6 x Metric 1/4in Drive 6 Point Socket: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm. 6 x Imperial 1/4in Drive 6 Point Socket: 1/4in, 5/16in, 11/32in, 3/8in, 7/16in, 1/2in. 5 x 25mm Phillips Bits: PH1(2), PH2(2), PH3. 3 x 25mm Parellel Bits: 6mm(2), 7mm. 5 x 25mm Torx® Bits: TX10, TX15, TX20, TX25, TX27. 2 x 25mm Hex Bits: 3mm, 4mm. 1 x 1/4in Adaptor.
The Stanley 47-720 Post level has built-in magnets for use on metal posts and surfaces and is supplied with heavy-duty elastic. It folds flat for reduced risk of damage in transit and easy to store and portable when not in use, gives complete protection to the vials.
Power Winder 30m Kit. Stainless steel hook for added durability and rust prevention. Ergonomic design, holds 30m of string. 45gr chalk capacity. Weight and style combination provides plumb bob facility. High impact case for durability. 3.5 to 1 gear ratio for faster rewind. Metal crank folds into the case for storage. Supplied with 113g blue chalk and line level.
Power Winder chalk line 30meter Stainless steel hook for added durability and rust prevention. Ergonomic design, holds 30m of string, 45g chalk capacity. Weight and style combination provides plumb bob facility. High impact ABS case for durability. 3.5 to 1 gear ratio. Rewinds faster. Metal crank folds into the case for storage.
The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations.This Stanley PowerLock® Classic Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class II
The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations.This Stanley PowerLock® Classic Pocket Tape has metric graduations only. Blade Length: 5mBlade Width: 19mmAccuracy: EC Class II
The Stanley PowerLock® BladeArmor® Pocket Tape has a curved steel, Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. The first 100mm of the blade is reinforced with BladeArmor® coating for maximum durability and reduced blade breakage. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations.This Stanley PowerLock® BladeArmor® Pocket Tape has metric and imperial graduations. Blade Length: 10m/33ftBlade Width: 25mmAccuracy: EC Class II
The Stanley PowerLock® BladeArmor® Pocket Tape has a curved steel, Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. The first 100mm of the blade is reinforced with BladeArmor® coating for maximum durability and reduced blade breakage. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations.This Stanley PowerLock® BladeArmor® Pocket Tape has metric graduations only. Blade Length: 8mBlade Width: 25mmAccuracy: EC Class II
The Stanley PowerLock® BladeArmor® Pocket Tape has a curved steel, Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. The first 100mm of the blade is reinforced with BladeArmor® coating for maximum durability and reduced blade breakage. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations.This Stanley PowerLock® BladeArmor® Pocket Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 25mmAccuracy: EC Class II
The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations.This Stanley PowerLock® Classic Pocket Tape has metric and imperial graduations. Blade Length: 3m/10ftBlade Width: 19mmAccuracy: EC Class II
The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations.This Stanley PowerLock® Classic Pocket Tape has metric graduations only. Blade Length: 3mBlade Width: 19mmAccuracy: EC Class II
