This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth.It is ideal for end grain and general purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide. Cutter seats at 21 degrees. Length: 6.1/4in.Cutter width: 1.5/8in.
The Stanley Dynagrip Ratcheting Wrench with self ratcheting action, for faster tightening of fasteners. No need to remove from fastener while tightening or loosening. Its cushion Jaw prevents damage to fastener in use. Easy to engage all sizes of fastening within size range. Capacity: 17-24mm.Length: 265mm.
Waterproof and rotproof one-piece general purpose polythene dust sheet. Ideal for covering furniture when decorating, plus many other usages. • 10 Micron• LDPE Polythene Size: 3.6 x 2.7m (12 x 9ft)
This Stanley Plastic Paint Kettle is suitable for use with all types of paint. It can also be used for mixing wallpaper paste or holding nails, screws and small tools when working at height.Capacity: 2.5 Litres.Depth: 150mm (6in).
The double arm steel paint roller frame will accommodate the jumbo professional range of roller refills - 43 mm (1.3/4in) diameter. Length: 300 mm (12in).
The Stanley Punch & Chisel Set contains a selection of high quality, chrome vanadium steel chisels for cutting, shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium and for cutting bolts, nuts and rivets. Punches are also made from chrome vanadium steel to precise specifications and are used for marking centre lines, hole locations and pilot drill starting points. Contains the following: 3 x Cold Chisels: 10, 12 & 16mm6 x Pin Punches: 1.5, 3, 4, 5, 6 & 8mm3 x Centre Punches: 2, 6 & 8mm
A 6-piece pin punch set made from quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Contains the following sizes: 1.5, 3, 4, 5, 6, and 8mm (1/16, 1/8, 5/32, 3/16, 1/4, 5/16in).
These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Size: No. 2 Pozidrive.Length: 100 mm x 1/4-inch hex.Box of 10.
These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Size: No.2 Pozidrive.Length: 70 mm x 1/4-inch hex.Box of 10.
Marking Gauge made from moulded plastic. The plastic stock has an abrasion resistant metal insert and the stem is calibrated for easy setting. It also has graduation marks at 2mm intervals.
The Stanley Open Reel Fibreglass Tape has a 13mm wide, durable fibreglass blade with easy to read markings in both metric and imperial graduations. The blade is non-corrosive, printed on both sides for easier reading and resists fading. Its high-visibility yellow ABS case makes it easy to find on the job site and there is a bi-material grip for comfort. The folding rewind crank with rotating fingertip knob makes blade rewind smoother and easier.This Stanley Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 60m/200ftBlade Width: 13mmAccuracy: EC Class III
The Stanley Open Reel Fibreglass Tape has a 13mm wide, durable fibreglass blade with easy to read markings in both metric and imperial graduations. The blade is non-corrosive, printed on both sides for easier reading and resists fading. Its high-visibility yellow ABS case makes it easy to find on the job site and there is a bi-material grip for comfort. The folding rewind crank with rotating fingertip knob makes blade rewind smoother and easier.This Stanley Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class III
The Stanley 1-96-183 Open Mouth Tool Bag is made from heavy-duty 600 denier fabric, with a reinforced plastic base for excellent strength and durability.The shoulder strap enables easy carrying of heavy loads and the multiple internal and external pockets allow excellent organisation of tools and accessories. Dimensions: 450 x 235 x 275mm.
The Stanley 1-96-182 is a 16 inch tote tool bag that is constructed from extra tough 600 x 600 denier fabric so that it will stand up to all worksite and weather conditions, giving the tote bag a longer life.This Stanley 196182 offers maximum tool protection thanks to its waterproof plastic bottom. The reinforced stress points and industrial leather provide extra strength and carry comfort.There is a heavy-duty steel handle with rubber grip that makes lifting this tote bag more secure and comfortable.The open structure on the Stanley tote makes for quick and easy tool access as it keeps everything in place and to hand for quick access.A rubber pad on strap gives a soft cushioning when transporting around worksites etc. There are large pockets on the side of the tote bag for cables, wrenches etc, and a centre pocket with weather flap for mobile phones etc.Size : 16 inch.
The Stanley Pocket Pouch is suitable for the secure storage of important items. Manufactured from 600 denier fabric and fully adjustable to different belt sizes.
The professional organiser has 8 deep compartments and a polycarbonate super clear lid to lock them all in place. Three sizes of conveniently removable compartments allow customisation. It also has a comfortable moulded grip handle. 6-years warranty. Dimensions approx.: 42.3 cm x 33.4 cm x 9.8cm.
The Stanley multi-angle hobby vice features a patented ball joint which allows you to rotate your project a full 360° and lock it at any angle. Multiple positions for convenience and easier access. 3in jaw opening holds a wide range of items. Removable rubber jaw covers a wide range of applications for protecting delicate finishes. The large C-clamp mount attaches to work surfaces up to 2.3/8in thick - also suitable for heavy-duty applications. Jaw capacity: 75mm (3in).
The Stanley One Touch Toolbox has a robust, durable design. The latches are designed for one hand operation, allowing easy opening. The box has a large storage volume, and the removable tray allows extra space for larger tools to be stored underneath. In addition, the toolbox has organisers on the top of the lid to conveniently store components and accessories. The extra wide, soft grip handle ensures comfort, and the padlock holes on the lid allow the box to be locked for added security. FEATURES: - One hand operation latch- Innovative design robust structure; large storage volume- Extra wide soft grip handle on top for easy lifting- Removable tray allows enough space for larger tools- Organisers in lid for small part organisation Dimensions: 59.5 x 28 x 26cm.
The Stanley One Touch Toolbox has a robust, durable design. The latches are designed for one hand operation, allowing easy opening. The box has a large storage volume, and the removable tray allows extra space for larger tools to be stored underneath. In addition, the toolbox has organisers on the top of the lid to conveniently store components and accessories. The extra wide, soft grip handle ensures comfort, and the padlock holes on the lid allow the box to be locked for added security. FEATURES: - One hand operation latch- Innovative design robust structure; large storage volume- Extra wide soft grip handle on top for easy lifting- Removable tray allows enough space for larger tools- Organisers in lid for small part organisation Size: 50cm (19in)
The Stanley One Touch Toolbox has a robust, durable design. The latches are designed for one hand operation, allowing easy opening. The box has a large storage volume, and the removable tray allows extra space for larger tools to be stored underneath. In addition, the toolbox has organisers on the top of the lid to conveniently store components and accessories. The extra wide, soft grip handle ensures comfort, and the padlock holes on the lid allow the box to be locked for added security. FEATURES: - One hand operation latch- Innovative design robust structure; large storage volume- Extra wide soft grip handle on top for easy lifting- Removable tray allows enough space for larger tools- Organisers in lid for small part organisation Size: 16in.
The Stanley One Touch Toolbox has a robust, durable design. The latches are designed for one hand operation, allowing easy opening. The box has a large storage volume, and the removable tray allows extra space for larger tools to be stored underneath. In addition, the toolbox has organisers on the top of the lid to conveniently store components and accessories. The extra wide, soft grip handle ensures comfort, and the padlock holes on the lid allow the box to be locked for added security. FEATURES: - One hand operation latch- Innovative design robust structure; large storage volume- Extra wide soft grip handle on top for easy lifting- Removable tray allows enough space for larger tools- Organisers in lid for small part organisation This bonus pack contains: 1 x One Touch Toolbox DIY 40cm (16in) 1 x One Touch Toolbox DIY 60cm (24in)
The Stanley STST1-70718 Open Tool Bag is great for toting around a reasonable selection of everyday tools for most jobs, and is very well made. Plenty of pockets for smaller items. The open design allows for quick access to your hand tools. Vertical storage pockets and loops for maximum organisation and accessibility. Small organiser compartment for drill bits and small parts. It is fitted with a strong, adjustable shoulder strap. Size: 32 x 20 x 26cm (12.1/2 x 8 x 10.2/8in).
This Stanley Open Tote Tool Bag has a secure, rigid and waterproof base. It comes with a variety of internal and external pockets, to protect valuables from dust and water spills which can easily happen on a job. Large open top allows for easy access as well as more space for larger tools. It has an easy carry handle, and is secure and accessible. Dimensions: 250 x 590 x 290mm
The Stanley 1-70-316 One Touch Toolbox has a heavy-duty design and extra width soft grip handle on top for easy lifting. It has a one-touch latch for easy opening of the toolbox. It has a 2/3rd removable tote tray which allows enough space for large tools to be stored underneath and a deep drawer with ball bearing slides for versatile organisation of various sizes of tools and small parts. It has a V-groove in the lid, which is suitable for use when cutting timber or pipework and an integrated padlock eye for securing tools and contents. Dimensions: 48 x 28 x 29cm.
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Size: No.2 Phillips. Length: 50mm x 1/4-inch hex. Box of 10.
These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No.3 Pozidrive.Length: 25 mm x 1/4-inch hex.Box of 25.
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No. 3 Phillips.Length: 25mm x 1/4-inch hex. Box of 25.
These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No.2. Pozidrive.Length: 25 mm x 1/4-inch hex.Box of 25.
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No. 2 Phillips.Length: 50 mm x 1/4-inch hex. Box of 10.
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No. 2 Phillips.Length: 25mm x 1/4-inch hex. Box of 25.
These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No.1 Pozidrive.Length. 25 mm x 1/4-inch hex.Box of 25.
These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Size: No.2 Pozidrive.Length: 50m x 1/4-inch hex.Box of 10.
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No. 1 Phillips.Length: 25mm x 1/4-inch hex. Box of 25.
Durable heavy-duty I-Beam aluminium level with 1 x fixed horizontal vial and 1 x 180° rotating vial top easy to read centre vial. The horizontal vial can be viewed from both side and above for ease of use. Shock absorbing end caps and pipe groove for use on rounded surfaces. 2 vials. Accurate to ± 1.5mm/1m.Length. 1200mm (48 in)
Durable heavy-duty I-Beam aluminium level with 1 x fixed horizontal vial and 1 x 180° rotating vial top easy to read centre vial. The horizontal vial can be viewed from both side and above for ease of use. Shock absorbing end caps and pipe groove for use on rounded surfaces. 2 vials. Accurate to ± 1.5mm/1m.Length 1000mm (40 in)
