Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90 D = 12.7 mmC = 25.4 mm
This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification: D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Angle A = 90 D = 12.7 mmC = 50 mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 32 mmD = 12.7 mm 1/2 in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 11 mmD = 4.0 mm 5/32
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 16 mmD = 6.3 mm 1/4 in
These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.T.C.T.1/4in Shank.A = 45° C1 = 12 mmC2 = 16 mmD = 31.8 mmB = 9.5 mm
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 4.8 mmD = 22 mmC = 12.7 mmBearings = 9.5 and 12.7 mm
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.The TR40D has a center tip for drilling abrasive materials.Dimensions:Shank: 1/4 inCutting Diameter (D): 15mmCutting Length (C): 25mm
Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.Outside Diameter:- 3/4inInside Diameter:- 1/4inThickness:- 9/32in
Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/4in Shank.R = 3.2 mmD = 22 mmd = 18.9 mmB = 12.7 mm
Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals.This TCT Countersink clamps onto any drill between 3 mm and 7.2 mm in diameter. The drill passes through the body of the countersink and is secured by two hexagon bolts which clamp the countersink onto the drill at the required position. Recommended for wood and man made boards.By reversing the countersink on the drill the UNI / CS can be used as a non-cutting depth stop. NOTE:- Drills not included.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inThe Trend CO24AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard.All cutters have a bottom cut feature.Diameter: 15 mm.Cutting depth: 25 mm.Shank diameter: 1/4 in.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 10mmC - Cutting Length - 19.1mmT.C.T.
These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.T.C.T.1/2in Shank.A = 45° C1 = 12 mmC2 = 16 mmD = 31.8 mmB = 9.5 mm
Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/2in Shank.R = 7 mmD = 31.9 mmd = 28.6 mmB = 16 mm
Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work.This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 25.4mmShank: 1/4in
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 5 mmC = 12 mmOL = 60 mm
A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames.It is easy-to-use with minimal setting-up time, completing the job both accurately and quickly.Used on-site and in joinery shops to increase productivity with excellent results.Four apertures for fire door requirements.No need for marking out in the conventional way.Quick and simple to set-up as the hinge is used as the pattern.Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges.Use with a light-duty router with 1/4 inch collet.Long reach router cutter required, 12 mm diameter with 70 mm overall length.Angled position slots to prevent creep. Hinge sizes possible: Length min: 2 5/8 in (67 mm). Length max :5 in (127 mm). Width min :3/8 in (9.5 mm). Width max: 1 3/8 in (35 mm). Door sizes possible: Height min: 6 ft 5 in (1955 mm). Height max: 6 ft 10 in (2100 mm). Thickness min: 5/8 in (16 mm).
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 18.2 mm 23/32in. Cutting Length: 21 mm. Shank Diameter: 1/4in.
The Faithfull Aluminium Wide Track Cutting Guide makes easy work of marking out and cutting sheet materials. Lightweight, rigid design for effortless handling. The easy-to-operate lever action jaws have large, soft grip clamping surfaces that securely lock on to the workpiece. The extra wide and thick reinforced aluminium profile offers increased durability over many other similar products. Two integrated T-slots accept M6 bolt heads to attach workshop accessories. The heat-treated zinc plated clamping bar and glassfibre reinforced nylon jaws ensure the clamp will have a long working life. Ideal for use with plywood, MDF, most other sheet materials, and for cutting doors and worktops to size. It can also be used as a clamp when gluing smaller panels together. They can be used as a guide for jigsaws, routers and circular saws, as well as marking pencils and knives. Available in two sizes with a surface clamping capacity of either 900mm (36in) or 1250mm (50in).1 x Faithfull Aluminium Wide Track Cutting Guide 900mm (36in)
Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.Outside Diameter:- 1/2inInside Diameter:- 1/4inThickness:- 3/16in
