The Faithfull 35 piece router bit set with 1/2in shank. Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank Diameter: 12.7mm (1/2in) Set Contains: (Diameter/Depth) 1 x Straight Cutter (3.2/14mm)1 x Straight Cutter (6.5/20mm)1 x Straight Cutter (10/25mm)1 x Straight Cutter (12.7/20mm)1 x Straight Cutter (12.7/25mm)1 x Straight Cutter (19/20mm)1 x Dovetail Cutter (12.7/8mm)1 x Dovetail Cutter (15.0/12mm)1 x Panel Pilot (6.5/30mm)1 x Guided Flush Trimmer (10/13mm)1 x Guided Flush Trimmer (10/25mm)1 x Guided Flush Trimmer (12.7/12mm)1 x Guided Flush Trimmer (12.7/25mm)1 x Guided Flush Trimmer (19.1/25mm)1 x Mortising Cutter (12.7/13mm)1 x Core Box R 3.2mm (7/6mm)1 x Core Box R 6.3mm (12.7/8mm)1 x Core Box R 6.3mm (12.7/20mm)1 x 90° V groove cutter (12.7/10mm)1 x 45° Guided Chamfer (30/14mm)1 x Guided Cove R 6.35mm (25/10mm)1 x Guided Cove R 9.5mm (30/14mm)1 x Guided Rabbeting Cutter (30/6.5mm)1 x Guided Rabbeting Cutter (30/8mm)1 x Guided Rabbeting Cutter (30/10mm)1 x Guided Classical Cove R 8mm (30/15mm)1 x Guided Wave Edge (30/18mm)1 x Guided Beading R 12.7mm (37/20mm)1 x Guided Double Roman (32/14mm)1 x Guided Double Roman (36/19mm)1 x Guided Roman Ogee (25/12mm)1 x Guided Roman Ogee (36/16mm)1 x Guided Rounding R 6.5mm (25/12mm)1 x Guided Rounding R 10mm (32/16mm)1 x Guided Rounding 12.7mm (36/20mm)
The Faithfull 15 Piece Router Bit Set with 1/2in shank. Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 12.7mm (1/2in). Set Contains: (Diameter/Depth) 1 x Straight Cutter (3.2/14mm).1 x Straight Cutter (6.5/20mm).1 x Straight Cutter (12.7/25mm).1 x Straight Cutter (19.0/20mm).1 x Dovetail Cutter (12.7/8mm).1 x Panel Pilot (6.5/30mm).1 x Guided Flush Trimmer (12.7/12mm).1 x Mortising Cutter (12.7/13mm).1 x Core Box R3.2mm (7/6mm).1 x 90° V Cutter (12.7/10mm).1 x 45° Guided Chamfer (30/14mm).1 x Guided Cove R9.5mm (30/14mm).1 x Guided Rabbeting Cutter (30/10mm).1 x Guided Roman ogee (25/12mm).1 x Guided Rounding R10mm (32/16mm).
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 19.0 mm 3/4in. Cutting Length: 25 mm. Shank Diameter: 1/4in.
Trend Lapping Fluid is designed solely for the engineering industry. It is ideal for use with diamond abrasives, where other lubricants may be too thick. Use instead of water to reduce the risk of rusting by 95%. Supplied in a flip-top dispenser bottle. Size: 100ml.
A bearing guided tungsten carbide tipped cutter designed to produce a decorative edge when working on MDF, softwoods, hardwoods, and plywood. 1/4in Shank Radius: 3.2mm Diameter: 22mm
Designed to meet the needs of both the professional tradesman and the home handyman.All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.Ovolo produces a stepped rounded profile along the edge of the material. The guide pin enables the cutter to follow intricate shapes. 1/4in Shank.Radius 6.3mmDepth of Cutter 13.3mmShank Diameter 1/4in
The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. The jig has the following features: Left and right hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Engraved lines for 65mm bolts and worktop cross-cut. 6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes including setting up and left hand and right hand corners, 400 mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100 mm radius corner, 40 mm radius corner, 35 mm kitchen door hole and 3/4 inch BSP hole for mixer taps. It covers fixed lengths for 400 mm, 500 mm, 550 mm, 600 mm, 616 mm, 650 mm, 700 mm and 900 mm wide worktops and can cuts up to 40 mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150 mm bolts. Engraved lines for short 65 mm bolts and worktop cross-cut. 10 mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Specification:Length: 1185 mm. Width: 390 mm. Thickness: 12 mm. Weight: 7.7 Kg. End cut: 45 degrees. Corner radius: 40 mm. Corner radius: 100 mm. Corner radius: 400 mm. Corner mitre joint: 45 degrees.
A one-piece tongue and groove set. The parts are inter-changed on the arbor to alter the set up. Maximum timber thickness 22 mm. Minimum timber thickness 15 mm. Instructions for use are supplied. TCT.1/2in Shank. Slot Sizes 3.35 mm - 10 mm.Max depth of slot 9.5 mm
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 16 mmD = 5 mm 13/64in
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 6.3 mm 1/4in. Cutting Length: 16 mm. Shank Diameter: 1/4in.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inThe Trend CO12AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard.All cutters have a bottom cut feature.Diameter: 8 mm.Cutting Depth: 25 mm.Shank Diameter: 1/4 in.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 15/64in 6.0mmC - Cutting Length - 5/8in 16mmT.C.T. 2 Flutes.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/2in Shank.R = 9.5 mmD = 32 mmC = 16 mmBearings = 9.5 and 12.7 mm
This Trend 3/2 x 1/4 TCT Two Flute Cutter has the following specification: D: 6.0mm (15/64in)C: 16mmOL: 48mmShank Diameter: 1/4in Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 10.0 mm 3/8in. Cutting Length: 19 mm. Shank Diameter: 1/4in.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 6.3 mm 1/4in. Cutting Length 25 mm Shank Diameter: 1/4in.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 15 mm 19/32in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mmD = 10 mm 25/64 in
Trend 46/44 rebate set which include different size bearings for a choice of rebates, they provides easy setting up and accurate depth of cut. Ideal for rebating straight and shaped work pieces particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Tooling TCT.1/4in Shank. By changing the bearing the size of the rebate can be altered, Supplied with 3 bearings.22.0 mm Bearing gives rebate of 1 mm.19 mm Bearing gives rebate of 2.5 mm.16 mm Bearing gives rebate of 4 mm.D = 24 mmC = 12.7 mm
Bearing guided rebate set for straight of curved work, this set is ideal for either stationary or portable routers. The standard rebate depth is 19.1 mm (when using 12.7 mm bearing) Available as extras are different size bearing which , when fitted, will give various rebate sizes. TCT 1/2in Shank. Diameter = 50.8 mmCcuuting length = 22.5 mmRebate = 19.1mm & 15.9mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90 D = 6.3 mmC = 25.4 mm
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 8 mmC = 14 mmOL = 120 mm
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boardsUse bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mmSuitable for 13-18 mm boardsUse bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mmSuitable for 19 mm + boardUse bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mmShank = 1/4in
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD1 3/8 inch D1 9.5 mm Cut length 1 inch Cut length 25.4 mm Shank Diameter 1/4 inch
Chamfer & V Groove Cutters These types of cutter are used for edging and chamfer cutting, on man-made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V grooving. Ball bearing and pin guided cutters enable curved work to be undertaken, bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. A range of valuable self-guiding chamfer/bevel cutters. Bearing follows the board beneath. T.C.T. Shank. = 1/4in D = 32mmC = 12.7mmB = 9.5mm Angle = 45°
The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high speed steel (HSS) anvil. Use with a Hammer. The chisel can be resharpened. Ideal for use with hinge and lock jigs.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inThe Trend CO24AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard.All cutters have a bottom cut feature.Diameter: 15 mm.Cutting depth: 25 mm.Shank diameter: 1/4 in.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 12.7 mmD = 38 mmC = 19 mmBearings = 9.5 and 12.7 mm
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12.7mm.Cutting length: 19mm.Shank: 1/4in.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.TCT extra long cutter. Designed for hollow honeycomb board worktops. * Use only on professional routers with 80 mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.C = 50 mmD = 12.7 mm 1/2 inD = 12.7 mm.C = 50 mm.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 15/32in 12.0mmC - Cutting Length - 3/4in 19.1mmT.C.T. 2 Flutes
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 25 mmD = 25 mm 63/64 inOL = 65 mm
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 12.0 mm 15/32in. Cutting Length: 19 mm. Shank Diameter: 1/4in.
