The DEWALT DCD805 XR Brushless G3 Combi has been engineered to give the greatest performance on the toughest jobsites, the 2 speed and 15 torque settings give the ultimate control over drilling and fastening applications. Its ultra-compact, lightweight design allows use in confined spaces, and fitted with an ergonomic, overmould rubber grip improving the user's comfort. The enhanced pivoting LED positioned on the foot offers greater visibility in dark, and confined spaces. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all DEWALT 18V XR tools. * Regarding 50% more power: vs DCB183 battery, not in application.** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery. Specification: Chuck: 13mm.No Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpm.Max. Torque: 90Nm.Capacity: Steel 13mm, Masonry 13mm, Wood 55mm.The DEWALT DCD805E2T XR Brushless G3 Combi is supplied with: 2 x 18V 2.0Ah POWERSTACK Li-ion Batteries1 x POWERSTACK Compact Charger1 x TSTAK Carry Case
The DEWALT DCB1102E2 XR POWERSTACK Starter Kit contains the following: 2 x 18V 2.0Ah DCBP034 XR POWERSTACK Slide Batteries. The DEWALT DCBP034 XR POWERSTACK Slide Battery is 25% smaller and 15% lighter than the DEWALT DCB183 18V XR 2.0Ah battery, making it easier to use in tight workspaces. Stacked pouch cell battery technology provides a low impedance construction, meaning that the rate of flow of electrons is much higher thanks to the innovative internal pouch battery connectors and electrodes. Providing a greater surface area vs a traditional cylindrical battery cell type. It also benefits from superior thermal performance, vs cylindrical batteries. This increases battery durability, improves the cycle life and results. Works with the complete line of 18V XR tools and chargers, bringing a new lease of life and power to existing power tools. 1 x DCB1102 Charger.
The DEWALT DCB094K USB Power Delivery Charging Kit charges all DEWALT 18V XR and FlexVolt batteries. It has a USB-C port and output power to charge your other personal devices up to 100W. There is also a USB-A port that acts as an adaptor, allowing you to charge devices up to 12W using traditional USB cords. Fitted with a belt hook for on-the-go stowing. Supplied with: 1 x 100W USB Cord and 1 x 65W Plug.
The Batavia On-the-go Charger, 2.2Ah 18V, is perfect for everybody who uses a MAXXPACK battery powered tool, when not near a main powered charging point. You can use it with any vehicle with a 12V charging point or lighter auxiliary port to charge all batteries from the Maxxpack collection. Compact and durable design, making it easy to store. Specifications: Input: 12V.Battery Charge Time: 2.0Ah: 55 min (± 5), 4.0Ah: 110 min (± 5), 5.0Ah: 135 min (± 5).Charging Current: 2,200 mA.Cable Length: 1.8m.Dimensions (L x W x H): 11.5 x 6.5 x 9.5cm.Weight: 0.27kg.
The Batavia Mini Saw is a compact, light, and handy plunge saw which is suited for all kinds of materials (woods, plastics, metals and ceramics). With this compact saw you can start sawing on the edges of your workpiece, as well as in the middle of your workpiece. This is possible, thanks to the saw blade, which you plunge into the workpiece. You can also adjust the cutting depth, so you can use this saw for a lot of different jobs. Comes as a bare unit, NO battery or charger supplied. Specifications: No Load Speed: 3,150/min.Max. Cutting Depth: Wood 28.5mm, Aluminum 3mm, Tile 8mm.Blade: 89 x 10mm Bore.Laser device: Yes.Weight: 1.72kg.
The Batavia MAXXPACK Brushless SDS Plus Drill with 4 modes for versatile use: drill, hammer drill, chiseling and chisel lock. Whereas the 'normal' drill mode is suitable for the normal drilling jobs, the hammer drill mode is perfect for drilling in hard materials, like concrete and masonry. Besides drilling, you can also use this rotary hammer for chiseling hard materials. Its powerful 18V brushless motor provides a longer runtime on one battery charge (NOT supplied) and a longer lifetime. A variable speed trigger allows you to match the speed to your drilling or chiseling job. It comes with a second handle, which can be rotated 360 degree around the tool, and a depth adjustment guide. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Chuck: SDS&.No Load Speed: 0-1,200/min.Impact Rate: 0-5,300/bpm.Impact Force: 2.2 joules.Sound Pressure Level LpA: 96.51 dB(A). Capacity: Steel 13mm, Concrete 26mm, Wood 30mm.
The Batavia Anti-vibration Multi-tool has been designed so the motor is disconnected from the housing. This gives this multi-tool an anti-vibration and anti-noise functionality. So no more shaking and a sound level which is more comfortable.You can change the accessory without the use of additional tools. Making it easier to use with less downtime between applications. You can also adjust the speed. The included dust extraction adapter enables you to work dust free, improving working conditions. Comes as a Bare Unit, NO battery or charger supplied. Specifications: No Load Speed: 5,000-18,000/min.Oscillation Angle: 3 degree.Weight: 1.2kg.
The Makita DJR185 Mini Reciprocating Saw features 2 switch levers with variable speed control; a trigger switch on the main handle and a paddle switch on the tool body, making operation easier in any grip position. Jigsaw blade compatible for increased versatility. A hex wrench is required for blade change. Its rubberised soft grip provides a comfortable and sure grip. There is also a single LED job light with pre-glow function. Comes as a Bare Unit, No Battery or Charger. Specification: Strokes at No Load: 0-3,000/min.Stroke Length: 13mmCapacity: Wood 50mm, Mild Steel Pipe 50mmWeight: 1.5kg
This latest evolution of the best selling N88WW framer brings even more power to job with a 5% increase in driving power together with a weight reduction. The waisted body design gives a much improved sightline to the tool nose. The handle has been lowered to improve balance and comfort in use; along with other design improvements these features will keep this tool firmly at no 1 in the pneumatic framing market. Its use of 28 degree wire collated nails keeps consumable costs to a minimum. Use for all your framing and first fix applications. Specification Magazine Capacity: 90 (max).Nail Range: 50-90mm First Fix NailsOperating Pressure: 70-120 PSI, 4.8-8.3 Bar.Driving Power: 1050 inch/lbs.Weight: 3.5kg.
Senco SC65 Pneumatic Semi Pro Coil Nailer offers rapid nailing in a whole range of applications. It has an ergonomic magnesium housing designed with comfortable rubber grip for great working experience, and the multi-directional exhaust deflector deflects air away from operator for comfort. A no-mark pad protects the work surface and the restrictive trigger ensures precise operating, as does the depth of drive adjustment. The high capacity, easy to load magazine and quick clear jam release ensure downtime is kept to a minimum. The tool drives 15° collated wire and plastic collated coil nails from 32mm to 65mm in length, and 2.3 to 2.9mm diameter. Ideal for wall sheathing/siding, timber frame construction, fencing , sub-flooring, boarding and other wooden assembly work . Comes with a 1 Year Warranty. Requires: 1/4in tailpiece.Operating Pressure: 4.9-8.3 bar.Air Consumption: 220 l/min.Magazine capacity: 250-275.Collation angle: 15°.Fastener length: 32-65mm.Length: 304mm.Width: 128mm.Height: 300mm.Weight: 2.49kg.
The Makita HR166DZ Brushless Rotary Hammer offers 2 modes of operation: rotation only, rotation with hammering. For added control there is a variable speed control trigger, it also offers both forward and reverse rotation. Fitted with a one touch sliding chuck for easy bit installation and removal. Compact and lightweight design with vibration absorbing housing to provide maximum control and comfort. There is also an electric brake for added safety and an LED job light. Comes as a Bare Unit, No Battery or Charger. Specification: Modes: Rotary drilling and Hammer drillingNo Load Speed: 0-680/min.Impact Rate: 0-4,800/bpmImpact Energy: 1.1 joulesCapacity: Concrete 16mm, Wood 13mm, Steel 10mmWeight: 1.8kg
The DEWALT DCG418T2 XR FlexVolt Grinder is supplied with: 2 x 54V 6.0Ah Li-ion Batteries1 x Side Handle1 x Keyless Guard1 x Blade Wrench1 x DCB116 Charger1 x TSTAK™ II Carry Case
The DEWALT DWE576K Precision Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling on wood and other construction materials. Its high torque motor offers durability and power for cutting job site and joinery materials. The guide rail is compatible for quick and easy use with the DEWALT guide rail system and the additional handle allows safe two-handed work. The Circular saw allows variable bevel adjustment to 57°. A protection hood provides up to 95% sawdust extraction. It has optimum balance for safe, fatigue-free operation. Supplied with: 1 x Track Base, 1 x Precision 24 Tooth Saw Blade, 1 x Rip Fence, 1 x Blade Spanner, 1 x Dust Extraction Spout and 1 x Kitbox. Specification Input Power: 1,600WNo Load Speed: 5,200/min.Max Cutting Depth: @90°: 61mm, @45°:49mm.Max Cutting Depth(Guide Rails): @90°: 57mm, @45°:44mm.Blade: 190x30mm, Bore 24 Tooth.Bevel Capacity: 57°. Length: 355mm. Height: 245mm.Weight: 4.0kg.DEWALT DWE576KL 190mm Precision Circular Saw 1600 Watt 110 Volt Version.
The DEWALT DCS335 XR Brushless Body Grip Jigsaw has a 4-position pendulum action, allowing the user to control the aggressiveness or smoothness of the cut. Tool-free bevel adjustment and clamp lock for fast and secure adjustment. It has the same cutting capabilities as top handled jigsaws but is better for cutting in tight or confined spaces and cutting at unconventional angles. Ideal for professional carpenters, joiners and woodworkers. Bare Unit, No Battery or Charger Supplied. Specification: Strokes No Load: 1,000-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Aluminium 57mm
The DEWALT DCF801 XR Sub-Compact Impact Driver is 33mm shorter than the previous generation, allowing access into small spaces. It has an efficient brushless motor with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg
