The DEWALT DW729KN Radial 3 Phase Arm Saw is free standing and features a solid cast iron arm machined to provide arm tracks with no inserts. Pre-assembled and delivered in a wooden crate. The controls are simple yet positive and adjustment scales enable the width, depth and angle to be cut and set with accuracy. Supplied with: 1 x 32 Tooth Saw Blade, 1 x Assembly Tools, 1 x Automatic Safety Return, 1 x Blade Brake and 1 x Legstand. Specification Input Power: 4,000WNo Load Speed: 2,780/min. Cutting Speed: 53m/secBlade: 350 x 30mm BoreDepth of Cut: @90°: 110mm, @45º: 75mmCapacity: Crosscut: @90°: 525mmWeight: 149kg
The Einhell TC-MG 135 E Grinding & Engraving Tool is a high quality, compact machine which is suitable for an enormous number of different applications for drilling, cutting, grinding and brushing thanks to its extensive range of accessories. The spindle lock enables you to remove the various attachments quickly and change them easily. Electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. Features a flexible shaft and a soft grip, ergonomic design. During use, the tool can also be conveniently mounted on the telescopic stand and related hook. Supplied with an extensive 189 piece accessory set for grinding, drilling, cutting and much more. Supplied with: 1 x Telescopic Table Clamp Stand, 1 x Key For Tool Change & 1 x Transport, 3 x Holders For Felt Polishing Disc, 1 x Brush Insert & Storage Case. The 189 Piece Accessory Set, contains the following: 12 x Special Corundum Mounted Points6 x Milling Pins22 x Sanding Tools (14 x Small & 8 x Tall)34 x Adaptors For Sanding Tool (20 x Small & 14 x Tall)3 x Adaptors for Miniature Grinding & Cutting Discs4 x Special Corundum Miniature Grinding Discs40 x Miniature Cutting Discs14 x Miniature Felt Polishing Discs (11 x Flat & 3 x Long)46 x Round Sanding Papers6 x HSS Drill Bits Specification Input Power: 135 Watt.No Load Speed: 10,000-35,000/min.Length: 340mm.Weight: 0.67kg.
The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)The DEWALT DCF922D2T XR Brushless Impact Wrench is supplied with: 2 x 18V 2.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DCF897 XR Impact Wrench with a 3/4in cold forged anvil with hog ring retention pin for durability and allows fast and frequent change of sockets without aligning any pins. Its brushless motor provides durable power and excellent runtime. Features variable speed, 3 speed select control or application specific torque and drive control. It produces a high torque of 950Nm, Break Away at 1,627Nm, delivering excellent performance for various applications. The wrench has an ergonomic grip for comfortable use and has been drop tested for enhanced durability. There is also a super-bright LED on the foot to avoid shadow and casts light at the point of application. Bare Unit, No Battery or Charger Supplied. Specification: Bit Holder: 3/4in Hog RingNo Load Speed: 0-400/1,200/1,900/min.Impact Rate: 0-2,400/bpmMax. Torque: 950Nm, Breakaway Torque: 1,627NmWeight: 2.6kg
The Metabo FSR-200 Intec Orbital Palm Sander is a lightweight, handy machine for convenient one-handed operation with a good weight to performance ratio, making it ideal for working overhead. It has dust-proof ball bearings for increased machine service life. The grip area is coated with a non-slip soft-grip surface for increased user comfort and safety. Its robust clamping system allows for attaching sand paper with or without Hook & Loop. The Intec Dust cartridge with filter allows you to work without connecting to a vacuum cleaner. Extraction possibility by means of connecting to an all-purpose vacuum cleaner via an adapter (NOT supplied) Supplied with: 1 x Hole Punch, 1 x Intec Dust Collection Cartridge, 1 x Pleated Filter and 1 x Plastic Carry Case. Specification Input Power: 200WOscillating Speed: 26,000/min.Oscillating Diameter: 1.4mmBase Plate: 102 x 114mmCable Length: 2.8mWeight: 1.25kg
The Einhell TE-OS 18/150 Li Solo Power X-Change Sander utilises 'Extreme Fix' hook & loop fastening so that the abrasive paper can be changed in seconds and then deliver a high rate of material removal due to low slippage. For clean, practically dust-free working, there is a dust collection box with active dust extraction. The collection box can be replaced by an attachment to a vacuum cleaner, drawing off the dust directly, this way the air remains clean and the abrasive paper sharp. The rugged aluminium fan impeller ensures that the sander runs smoothly to deliver optimum results. 6 x Abrasive Sheets for wood are included so that you can begin work immediately. Supplied as a Bare Unit - No Battery or Charger. Specification: Oscillating Speed: 24,000/min.Oscillating Diameter: 1.6mmSanding Paper Size: 150 x 150 x 100mmWeight: 0.748kg (without battery)
The Einhell TE-AG 18/115 Li BL-Solo Power X-Change Grinder has a brushless motor and robust aluminium gearing housing that offers greater power and a longer lifetime. Equipped with overload protection, a soft start function and restart protection for increased user safety. The separation of motor and gearing provides for smooth operation, while the quick-adjust cutter guard enables flexible working. Comfortable working is ensured via the slim design with its ergonomic soft grip and additional handle. For flexibility, the additional handle can be fitted in two positions. Supplied as a Bare Unit - No Battery or Charger. Cutting disc not included. Specification: No Load Speed: 8,500/min.Disc Size: 115mmWeight: 1.92kg
The Einhell TE-SD 3.6/1 Li Cordless Screwdriver has robust metal gearing for maximum durability. Bits can be changed quickly thanks to the 6.35mm (1/4in) magnetic bit holder. With an ergonomic design and soft grip handle for easy handling and working without tiring, even in prolonged use. For optimum operation in dark areas there is integrated LED lighting. The cordless screwdriver is always ready-for-use thanks to the lithium-ion technology without self-discharge. Supplied with: 1 x Set of 10 Bits, 1 x 3.6V 1500mAh Rechargeable Battery, 1 x Micro USB Charger and 1 x High-Quality Metal Storage Box. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 180/min.Max. Torque: 4.5NmCharge Time: 3-5 hoursLength: 185mmWeight: 358g
The Einhell CE-CB 18/254 Li Solo Cordless Car Polisher can be used to quickly polish your car to a mirror finish, independent of stationary sources of electricity thanks to its cordless technology. Handy and robust polishing machine. Fitted with a soft grip for comfortable operation and a perfectly firm hold. For increased user safety there is an ON/OFF switch and overload protection. It is supplied with a textile polishing bonnet for applying the polishing agent and a synthetic polishing bonnet for finishing off. It is a member of the Power X-Change family and is powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. The tool is supplied WITHOUT a battery and charger but it can be powered by Power X-Change rechargeable batteries. Bare Unit, No Battery or Charger Supplied. Specification: Oscillating Speed: 2,500/min.Pad Diameter: 254mmWeight: 1.93kg
The DEWALT DCR009 Compact Bluetooth Speaker is compact, powerful and extremely durable. Thanks to its IP67 rating its able to withstand dust and liquids, ideal for tough worksite conditions. Bluetooth 5.0 pairing allows you to connect with a device up to 30 metres away and at full volume it can emit an impressive 86dB. When at half volume, and fully charged, it can last for 16 hours. Front control buttons allows user to control audio directly from unit. This is a rechargeable Bluetooth speaker comes with a USB-A to USB-C charging cable. Specifications: Max. Volume: 86dB.Runtime: 16 Hours @ 50% Volume.Charge Time: 2 hours.IP Rating: IP67.
The DEWALT XR POWERSTACK Slide Battery features stacked pouch cell battery technology providing a low impedance construction, the rate of flow of electrons is much higher thanks to the innovative internal pouch battery connectors, and electrodes. The XR Slide Battery provides a greater surface area versus a traditional cylindrical battery cell type, and it also benefits from superior thermal performance, versus cylindrical batteries. This increases battery durability, and improves the cycle life and results. The XR works with the complete line of 18V XR tools and chargers, bringing a new lease of life and power to existing power tools.This DEWALT DCBP518H2 POWERSTACK Slide Battery Twin Pack contains; 2 x 18V DCBP518H2 POWERSTACK Slide Batteries 5.0Ah Li-ion.
The DEWALT DCL040 is the latest generation 18 Volt Work Light, using LED Technology and featuring new XR Li-Ion technology. It has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip increase comfort. The LED Bulb producing 110 Lumen output (10,000Hr Life) with a 2 zone light pattern with the flashlight head pivots more than 90 degrees vertically with ratchet lock. The Flashlight includes an integrated hook for hanging and can be used free standing, with belt clip. PLEASE NOTE: 18 Volt Battery and charger sold separately Specification Bulb Type: LED.Height: 240mm.Length: 115mm.Weight: 260g.
The Einhell TE-ID 500 E Impact Drill is suitable for jobs in and around the home, user-friendly thanks to its high-quality quick-change drill chuck. The infinitely adjustable drilling depth stop made of metal enables repeat drilling depths. Equipped with ergonomic soft grips for particularly comfortable operation. Its additional handle comes with ribs for secure fastening. With the practical speed preselector so you can adapt the speed of the robust, long-lasting metal gear unit at any time to the material you want to work on. It can also be used in a drill stand thanks to the 43mm clamping neck. Specification Chuck: 1.5-13mm.Input Power: 550 Watt.No Load Speed: 0-3,000/0-48,000/min.Capacity: Wood: 25mm, Metal: 8mm, Concrete: 10mm.Weight: 1.7kg.
The Einhell TE-PL 18/82 Li - Solo Planer has large knife shafts and a solid aluminium soleplate to provide optimum, flat results. The soleplate has a V-shaped groove for easy chamfering. There is also an automatic parking rest to protect both the planer and the workpiece. Itsergonomic, soft grip handle ensures tireless and comfortable operation. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This planercomes as a Bare Unit, NO battery or charger. 2.5Ah batteries or higher are recommended for best results. Supplied with: 1 x Parallel Guide, 1 x Rebate Depth & 1 x TCT Planing Knife. Specifications: Cutting Depth: 2mm, Rebate Depth: 8mm.Planer Width: 82mm.Weight: 2.44kg.
Trend T32 Micro Filter Bag has multiple inner layers that collect coarse dust and dirt particles whilst protecting the outer layer from clogging. The bag material has a greater air-permeable structure when compared to paper filter bags, providing increased suction. For dry use only. Supplied as a pack of 5.
The Makita DDF083 Drill Driver has a brushless motor for increased power and run time. Whilst the variable speed trigger and 2 mechanical gears provide increased control. It offers both forward and reverse rotation. The body is fitted with an ergonomically designed comfort grip for increased user comfort. For added user safety there is an electric brake. Other features include a belt clip and LED job light. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-500/0-1,700/min.Torque Settings: 20 + DrillMax. Torque: 23/40NmCapacity: Wood 36mm, Steel 13mmWeight: 1.1kg
The Makita GA005GZ XGT 40Vmax BL Grindercomes with the following: 1 x Side Handle.1 x Lock Nut Wrench.1 x A-80656 Grinding Wheel 125 x 6mm. NO battery or charger supplied.
Makita DDF458Z LXT Drill Driver with enhanced dust and drip-proof performance is ideal for use in outdoor applications or harsh environments. Its single sleeve keyless chuck allows for easy bit installation/removal, even with one hand. There is also a twin LED job light with pre-glow and afterglow functions. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 400/0-2,000/min.Max. Torque: 91Nm.Torque Settings: 21 + Drill.Capacity: Steel 13mm, Wood 65mm.Weight: 2.1kg.
The DEWALT DCW604 XR Twin Base Router has been designed to be powerful yet heavy-duty. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. The aluminium motor housing enables the router to be quickly transformed into a fixed base attachment enabling for increased versatility. The variable speed ranges enable the router bit to be optimised depending on application and material type. The 5-position adjustable turret enables for stepped or repeated plunges. The spindle lock offers quick and easy router bit change, saving time. Soft start reduces movement of the tool on startup increasing user control. There is an electronic brake for added control and safety. Rubber overmould grips make using the unit more comfortable. Dual LED lights increase visibility around the router bit during operation for increased accuracy. Supplied with a TSTAK™ Kitbox. Bare Unit, No Battery or Charger Supplied. Specification: Collet: 8mm (1/4in)No Load Speed: 16,000 – 27,000/min.Plunge Depth: 55mmMax. Cutter Diameter: 30mm
The Einhell TE-PL 900 Planer is a powerful hand-held planer with a large blade shaft to deliver optimum planing results. The solid aluminium sole plate offers superb sliding properties and delivers flat results. In addition, the soleplate has three V-shaped grooves for easy chamfering of edges. The automatic parking rest protects both the workpiece and planing blade. Fitted with an ergonomic, soft grip handle for a firm, secure hold and working without fatigue. Chips can be ejected either to the left or right, whichever is preferred. Fitted with a practical cable clip for securing the wound-up cable, with a twist of the hand, for neat storage. The knife change tool is stored in an accessory depot on the plane itself, for easy location and added convenience. Supplied with a parallel stop for straight and precise planing results, a rebate depth stop for making recesses with ease and a TCT planing blade (reversible blade) for a high surface quality. Specification: Input Power: 900W.Cutting Depth: 0-3mm, Rebate Depth: 18mm.Planer Width: 82mm.Weight: 3.6kg.
The Einhell TE-CP 18 LI USB-Solo Power X-Change Battery Adaptor provides a practical and mobile power source for charging devices such as mobile phones, tablets and MP3 players. The adaptor plugs into a Power X-Change battery, providing plenty of power for charging. It has 2 USB ports, allowing 2 devices to be charged simultaneously. For fast charging, one of the ports is supplied with a powerful 2.1Ah charging current. Bare unit, no battery or charger. Voltage: 18 Volt.Power Output: USB port 1: 1.0Ah, USB port 2: 2.1Ah.Weight: 0.06kg.
