The Makita DLX2145TJ LXT Twin Pack, contains the following: 1 x 18 Volt DHP458 LXT Combi Drill is an extremely compact tool with an overall length of only 225mm, the shortest in its class. It has enhanced dust and drip-proof performance for use in outdoor applications or harsh environments. The machine has a battery fuel gauge and a metal gear box for long life. It has two variable speeds, an electronic brake and an adjustable side handle for extra control during use. No Load Speed: 0-400/0-2,000/min.Blows per Minute: 0-6,000/0-30,000/bpm.Max Torque: 44/88Nm.Torque Settings: 21 + drill.Capacity: Wood: 65mm, Masonry: 16mm, Steel: 13mmWeight: 2.2kg. 1 x 18 Volt DTD152Z LXT Impact Driver has a compact design with an overall length of only 137mm. Although small it is packed with all metal gears and mechanical 2-speed control. The variable speed control trigger with forward/reverse rotation provides control, even in tough applications. It also has a soft grip handle that has been designed to maximise thrust right to the bit. With an electric brake for increased user safety and bright twin LED job lights for working in dark conditions. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,900/min.Impact Rate: 0-3,500/bpm.Max Torque: 165Nm.Capacity: Machine Screw: M4-M8, Standard Bolt: M5-M16, High Tensile Bolt: M5-M12Coarse Thread Length Capacity: 22-125mm. 1 x 14.4-18 Volt DC18RC Compact Li-Ion Charger has a built-in cooling fan system that blows cool air into the battery, which keeps the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. Has 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with 2 x 18 Volt BL1850 5.0Ah Li-Ion Batteries and 1 x Type 3 MAKPAC Connector Case.
The Kew Nilfisk Alto Replacement Fleece Bags are designed to collect damp and dry debris. They are compatible with the Nilfisk Buddy II. Supplied as a pack of 4.
The DEWALT DCH253 18 Volt SDS Plus Rotary Hammer Drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. The DCH253 features best in class vibration (6.6m/s²) to reduce user fatigue and maximise operating periods. A bright white LED with delay feature improves visibility. Specification Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 JoulesCapacity: Concrete: 24mm, Steel: 13mm, Wood: 26mmWeight 3.1kgDEWALT DCH253 M2 SDS Plus Rotary Hammer 18 Volt. Supplied with: 2 x 18 Volt 4.0Ah XR Li-Ion Batteries, 1 x Multi-Voltage Li-Ion Charger, 1 x Multi-Position Side Handle and 1 x Heavy-Duty Kit Box.
DEWALT DCL077 Compact Task Light with a 360° handle enabling use in multiple orientations. There is also an integral tripod mount. It has 3 light settings, the most powerful produces 2,000 lumens with a natural daylight hue. Compatible with DEWALT 10.8V, 12V, 18V XR Li-ion batteries. Bare Unit - No Battery or Charger supplied. Specification: Light Output: 500/1,000/2,000 lumens.
This Einhell TE-VC 2340 SACL Wet/Dry Vacuum Cleaner conforms to dust class L standard in accordance with European standards. Ideal for the careful cleaning of surfaces not sensitive to water. Unlike normal vacuum cleaning and wiping over, the wet dry vac provides deep-down and thorough cleaning and is an ideal addition to standard household cleaning appliances when it comes to stubborn and ingrained dirt. Since it filters fine dust, the wet dry vac is particularly suitable for allergy sufferers. A filter cleaning system restores the suction power. The suction power is infinitely adjustable using the speed controller, and the blow connection is suitable for blow-cleaning hard-to-reach areas. Fitted with an automatic coupler socket (230 V, max. 2,180W) for connecting power tools for DIY work. Making it ideal for cleaning tasks on the site, in the workshed or in the hobby room. Its sturdy rust-proof stainless steel tank has a capacity of 40 litres. To enable the water which has been suctioned up to be drained easily there is a water drain screw. For easy transport there are large wheels, castors and a trolley handle, and a cable winding and a suction tube holder are built into the housing. A practical holder for accessories means the nozzles are always ready to hand and provides for neat storage of the extensive accessories. Supplied with a stainless steel telescopic tube (Ø 36mm) with air regulator, a 3 meter heavy-duty plastic suction hose (Ø 36mm), a large combination, crevice and upholstery nozzle, plus a pleated filter, a foam filter and a synthetic dust bag. Specifications: Input Power: 1,500W.Power Take Off: 1,900W.Suction Power: 225 mbar.Collection Container Volume: 40 litre.Dust Protection Class: L.Suction Hose Length x Ø: 3m x 36mm.Power Cable Length: 6m.Weight: 10.1kg.
This Bosch GPO 14 CE Professional Polisher delivers convenient handling and high torque for fast work progress and best results. Continuous work on large surfaces is enabled by its powerful 1,400W motor with soft start, while speed selection is ideal for polishing various materials. It also features constant speed, direct motor cooling, overload protection, and restart protection. Comfortable to operate during work thanks to its ergonomic handle with soft grip and a low weight. Specifications: Input Power:1,400W.No Load Speed:750-3,000/min.Grinding Spindle Thread: M14.Rubber Sanding Plate Diameter: 180mm.Wire Cup Brush Diameter: 100mm.Cup Wheel Diameter: 180mm.Polishing Sponge Diameter: 160mm.Surface Brush Diameter: 175mm.Weight: 2.5kg.
Einhell TC-US 350 Stationary Belt Grinder with grinding/sanding belt and grinding/sanding wheel functions. This combination grinder/sander offers a really impressively high removal capacity, making it ideal for major jobs on wood too. Thanks to the different grinding/sanding settings and grains, the upright belt grinder/sander can be used according to individual requirements. The sturdy and distortion-free design in combination with the large, adjustable work supports is ideal for a wide range of applications, including working on large and wide pieces of wood. A guard hood which is closed at the side provides safety during operation, as does the spark guard window which can be adjusted without any tools. Four rubber feet absorb vibrations to ensure a firm and secure standing position. Supplied complete with a coarse grinding/sanding wheel and a grinding/sanding belt. Specifications: Input Power: 350W.Max. Sanding Belt Speed: 900 m/min.Max. Idle Speed Wet Grinding Disc: 4,456/min.Sanding Belt (Length x Width): 686 x 50mm.Grinding Disc Diameter: Inner 32mm, Outer: 150mm.Grinding Disc Thickness: 20mm.Weight: 8.15kg.
The Einhell TP-MX 18-2 Li BL-Solo Power X-Change Paint/Mortar Mixer has a powerful brushless motor to ensure maximum performance with longer runtime. Whether concrete, plaster, levelling compound, mortar or paint is to be mixed: With the powerful cordless paint and mortar stirrer, just the right tool is at hand to mix a homogeneous mass. The robust aluminium gearbox housing offers the necessary stability for difficult work. Equipped with speed electronics for optimum adaptation to material and feed. The soft start ensures the slow absorption of the stirring motion and avoids annoying splashes of paint or the swirling up of powders. The ergonomically shaped handle with integrated softgrip surfaces ensures a firm grip and comfortable, safe handling. Fitted with a M14 thread for use with all common M14 stirrers. Delivery includes a stirrer (Ø 120mm) and an open-ended spanner for easy stirrer replacement. Part of the Power X-Change family. Powered by Lithium-ion rechargeable batteries with a battery management system for a long life.Supplied as a Bare Unit - No Battery or Charger supplied.Specifications:No Load Speed: 450/720/min.Stirrer Receptacle: M14.Stirrer Diameter: 120mm.Weight: 3.75kg.
The Paslode IM45 GN Lithium Multipurpose Coil Nailer has the ability to fire a wide range of nails that suit different applications including: metal roofing, shingles, cladding and fencing. Compact and lightweight design that is faster and safer than existing methods, with no need for compressors and hoses. No debris nail collation, used plastic coil is ejected out of the tool in one piece allowing for easy tear off and disposal. Unlike wire welded collation type, the plastic strip prevents small collation particles from damaging the installation in the long term. Delivers a perfect flush finish every time. The patented plastic coil delivery system ensures material isn't trapped under head, providing the highest quality. Supplied with: 1 x 2.1Ah Li-ion, 1 x Battery Charger, 1 x Impulse Cleaner, 1 x Impulse Lubricating Oil, 1 x Pair of EN166:F Safety Glasses, 2 x No-Mar Rubber Tips, 1 x Allen Key and 1 x High Impact Carry Case. Specification: Power (Impact Force): 30 joulesFastener Length Range: 25-45mmFixings: Per Second: 2 fixings, Per Hour; 1,000 fixingsMagazine Capacity: 125Fuel Cell Capacity: 1,000 shotsBattery Capacity: 2.1AhFixings Per Battery Charge: 4,200 ShotsBattery Charge Time: 90 min.Weight: 2.75kg
The Einhell TC-BJ 900 Biscuit Jointer is ideal for ambitious DIY enthusiasts, allows the production of perfect butt joints and cabinet joints for numerous applications. It features an infinitely variable angle and height setting facility. The routing depth can be set to three different levels easily by using the quick-adjust facility. With a large base plate made of solid aluminium, providing perfect stability and exact routing. The spindle lock enables fast cutter change. Supplied with: 1 x Face Spanner, 1 x Dust Bag and 1 x Transport & Storage Case. Specification Input Power: 860WNo Load Speed: 11,000/min.Groove Cutter: 100 x 22 x 3.8mmMax. Cutting Depth 14mm, Fence Adjustment 0°-90°Weight: 3.25kg
The Einhell TC-ID 1000E Impact Drill is suitable for DIY enthusiasts to use around the home and garage. A switch lets you select between the drilling and impact drilling functions. The sturdy full metal key chuck assures a safe fixing of the tool bit. With the integrated electronic controls the speed can be pre-selected and precisely adjusted. The sturdy, adjustable drilling depth stop is made of metal and enables exact, repeat drilling depths. The reversing facility means that screwdriving jobs can also be performed. For user-friendly and safe operation of the machine there is a large soft grip area and an additional handle with an anti-twist lock. Chuck: 13mm Keyed.Input Power: 1,010 Watt.No Load Speed: 0-3,000/Min.Impact Rate: 0-48,000/bpm.Capacity: Concrete: 16mm, Steel: 13mm, Wood: 32mm.Weight: 2.12kg.
The Einhell PXC Power-X Twincharger charges two 18V Li-ion batteries at the same time and can be used universally for all 18V Power X-Change batteries. Intelligent charging management provides maximum safety and optimum charging. Charging cycles are adjusted to the specific situation, so the batteries have a longer service life. The 6-stage charging system provides the user with up-to-the-moment battery status information. Integrated suspension eyelets for easy wall mounting. Specification: Output Voltage: 18VOutput Current: 3A
The DEWALT DCH333 XR FlexVolt Brushless SDS Plus Hammer has a brushless motor for extreme run time and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 30mm. Also fitted with a bright white LED with delay feature that improves visibility. DCH333X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH333NT: Bare Unit, No Battery or Charger. Specification Modes: Rotary, SDS Hammer, Chisel Only. No Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min with 3.5 Joules.Capacity: Concrete: 30mm, Steel: 13mm, Wood: 26mm.Weight 3.7kg.The DEWALT DCH333NT XR FlexVolt SDS Plus Hammer is supplied as a Bare Unit, No Battery or Charger supplied.
The Makita DTW1001 Brushless 3/4in Impact Wrench offers an extra high tightening torque of 1000Nm thanks to its high-powered, brushless motor and newly designed impact mechanism. It is equipped with twin LED job lights with pre-glow and afterglow function for working in dark areas and 3-stage impact power selection. This reduces fault tightening, you can suit the material of the workpiece or the screw at a push of a button. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 3/4in SquareNo Load Speed: 900/1,000/0-1,800/min.Impact Rate: 0-1,800/0-2,000/0-2,200/bpmMax. Fastening Torque: 1,050NmNut Busting Torque: 1,700NmCapacity: Standard Bolt M12-M30, High Tensile Bolt M10-M24
The BLACK and DECKER CS1200 Circular Saw has been designed for DIYers. It takes a 165mm circular saw blade which can be raised, lowered and bevelled in order to make 90° or angled cuts through a variety of thicknesses of timber and similar wood-based materials. The base plate includes a slot for a rip fence. Easy to use, the trigger features a safety start to prevent accidental activation. The dust port has been integrated into the blade guard. This can be connected to a vacuum cleaner or dust extractor hose for dust extraction. Specifications: Input Power: 1,200W. Blade Diameter: 165mm.
The Einhell TC-JS 18 Li-Solo Jigsaw is always ready to hand when it comes to the perfect cut in a wide range of materials. It delivers exact cuts thanks to really smooth operation. For fast cuts it has a selectable pendulum action. The universal blade holder, without tools saves unnecessary hand movements, enabling the blade to be changed quickly. For optimum visibility while working there is a dust blow-off function. The integrated plastic sliding element protects particularly sensitive workpieces. Member of the Power X-Change family, compatiable with all Power X-Change batteries and chargers. Comes as a Bare Unit, No battery or charger. Supplied complete with a KWB quality saw blade for wood. Specifications: No Load Speed: 2,700/min.Max. Angled Cuts: 45 deg;.Cutting Depth: Steel 8mm, Wood 70mm.Saw Blade Holder Type: T-shaft.Lift Height: 20mm.Suction Connection Diameter: 36mm.Weight: 1.62kg.
The Bosch EXPERT EXAL18V-160 Charger has three charging modes: Standard, Power Boost and Long Life. Modes can be activated via the charging mode button, depending on your needs. Power Boost mode is your choice for a full charge at the highest charging speed. Select Long Life mode for a gentler full charge, which helps extend battery lifetime. 5 LEDs indicate the precise state of charge of your battery.Intelligent Active Air Cooling 2.0 cools the batteries efficiently, and FlexTemp Charging extends the battery charging temperature range of EXPERT batteries from -10°C to 55°C. Both features reduce downtime by enabling fast charging initiation of warm batteries, even after heavy-duty applications. Furthermore, FlexTemp Charging also enables charging of cold batteries. The ultra-fast charger EXPERT EXAL18V-160 only needs 39 minutes to fully charge an EXBA18V-80 battery, thanks to a charging current of 16A. Compatible with the Bosch Professional 18V System and with the multi-brand battery alliance AMPShare.Specifications:Battery Charging Voltage: 14.4 – 18VCharge Current: 16 AWeight: 0.85kg
The Rapid Airtac PS101 Pneumatic Stapler is one of the handy range of pneumatic staplers, small and lightweight and ideal for DIY. Easy to use, applications include textiles, leather, light joinery, tapestry, labelling and upholstery. It fires Rapid No. 53 fine wire staples which are barely visible and have minimal effect on fibres. It has a long nose for precise work with a no-mar pad to protect surfaces and a flat front for easy access in difficult areas. The 360° adjustable air-system ensures you never get exhaust-air in your face. The quick load magazine system ensures you can reload consumables quickly and easily when needed. It is a lightweight, long lasting die cast aluminium stapler with a grip-friendly handle for best comfort. It comes in a hard plastic case including oil pot, hex wrenches, safety glasses and a box of 300 No. 53 staples with a 10mm leg length. Compatible with Rapid No. 53 Staples 6-16mm. There is no limitation in fire rate and all are covered by a 2 year guarantee. Trigger Type: Contact Actuation Trigger.Operating Pressure: 5-7 Bar.Air Consumption: 0.26 – 0.29 Litre.Fires: Rapid No. 53 Staples 6-16mm.Fastener Capacity: 190 staples.Nose Length: 22mm.Nailing Distance: To Wall: 14mm.
The Kapro 842G PROLASER BAMBINO trade; with an accuracy of plusmn;0.4 mm/m ( plusmn;0.0004 in/in) and a remarkable self-leveling range of plusmn;3 deg;, it guarantees precision and accuracy in every leveling endeavor. The intersecting horizontal and vertical lines extend their operational range up to an impressive 15 meters (50 feet), ensuring you have the reach you need for various tasks. Designed for professionals seeking unparalleled accuracy in confined spaces. Ideal for a wide range of applications, including electrical installations, HVAC projects, cabinet installation, and more. This laser level encapsulates all the remarkable features of larger lasers within a compact, easily transportable, and mountable design. Supplied with a flexible mini tripod which can be attached to virtually any object. Specifications: Accuracy: plusmn;0.4mm/m ( plusmn;0.0004 in/in).Self-levelling Range: plusmn;3.Laser Range: 15m.Power Supply: 2 x AA Batteries (supplied).
The Makita BS001G XGT 40Vmax BL Sander has a powerful brushless motor. A lock-on feature allows for continuous operation and reduced fatigue. The front handle angle can be adjusted to increased user comfort. Automatic belt position adjustment ensures consistent sanding alignment and improved accuracy.Compatible with the Auto-Start Wireless System (AWS), connects to compatible dust extractors via Bluetooth. The dust extractor automatically runs while the switch is on.Supplied in a MAKPAC Type 4 Case as a Bare Unit, NO battery or charger. SpecificationsBelt Speed: 120-470 m/min.Belt Size: 76 x 533mmVacuum Cleaner Connection Ø: 22mmWeight: 3.8kg without battery
The DEWALT DCS331 XR Premium Jigsaw is fitted with a powerful & highly efficient PM47 fan-cooled motor, that features replaceable brushes. Delivering a fast cutting action, up to 3000 strokes per minute, maximising user productivity. The intelligent variable speed trigger & lock-off switch provide quick controlled cuts and enhanced work safety. It's 3-position pendulum action controls the aggressiveness or smoothness of cuts. The tool free adjustable shoe with anti-scratch cover bevels 45°, in both directions. Uses a quick and easy patented keyless blade change system, that accepts T-shank blades. It's modular component design provides trouble free servicing whilst the patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation. There is also a dust blower that keeps line of cut clear of dust and debris. DCS331M2: 2 x 18V 4.0Ah XR Li-ion Batteries. DCS331N: Bare Unit, No Battery or Charger. Specification Strokes No Load: 0-3,000/min.Stroke Length: 26mm.Bevel Capacity: 45°.Capacity: Wood: 135mm, Metal: 10mm.The DEWALT DCS331M2 XR Premium Jigsaw 18V is supplied with: 2 x 18V 4.0Ah Li-ion Batteries.1 x Anti-Scratch Shoe Cover1 x Dust Port1 x Multi-Voltage Li-ion Charger1 x Heavy-Duty Kit Box
The Metabo ASR 35 M ACP All-Purpose Vacuum offers high user protection: certified in accordance with EU standard for M Class dusts. It is ideal for dust extraction from power tools in continuous mode, both on construction sites and in the workshop. Especially suited for extracting concrete and rock dust. Suitable for liquids and dry solids with commercial registration. AutoCleanPlus: saves both cost and time thanks to automatic MPulse filter cleaning during continuous use. If the optimum suction performance falls below a certain level, the filters are vibrated immediately. It also automatically shuts down once the maximum fill level is reached when vacuuming liquids. Automatic trailing mechanism for emptying the suction hose completely. It has a sturdy design thanks to especially large wheels and castors with wheel stop. The body features include: cable winding mechanism, practical accessory case and storage area, and a power socket for use with a power tool with automatic start-up/shut-down. Supplied with: 1 x 4m Anti-Static Suction Hose Ø35mm1 x 48mm Connection Bush Ø41mm1 x Handle Adaptor2 x Plastic Suction Pipes2 x Polyester Filter Cassettes (M Class)1 x PE Filter Bag1 x Crevice Nozzle1 x Floor Nozzle Ø300mm Specification: Input Power: 1,400WCapacity: Wet/Dry: 35 litresMax. Air Flow: 4,380L/min.Vacuum: 248m/barSuction Hose Diameter: 35mmWeight: 16kg1 x Metabo ASR 35 M ACP All-Purpose Vacuum M Class 110V Version
The Makita DUB186Z LXT Blower has a variable speed control trigger with 3 air volume settings: low, medium and high. Its compact, lightweight design incorporates an ergonomic soft grip for added comfort and control. Equipped with a battery protection circuit which is designed to protect the battery from damages due to over-discharge, high temperature, or overload current. Supplied with a long nozzle. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 0-18,000/min.Max. Air Speed: 68 m/sec.Max. Air Flow Rate: 3.2 m³/min.Weight: 2.1kg
The Bosch EXPERT EXBA18V Battery Pack features high power tabless cells with less inner resistance for high power and outstanding energy density. Its robust design incorporates reinforced housing and outstanding heat management with COOLPACK 2.0 technology for longer life. The 5-LED indicator displays state of charge with remaining capacity and defect risk detection.One battery fits all. Compatible with the Bosch Professional 18V System and the multi-brand battery alliance AMPShare.
The Bosch EXPERT EXBA18V-55 Battery Pack provides up to 2000W maximum power for demanding applications.
The Makita DMP181 LXT Inflator for inflating tyres of cars and bicycles, sport balls, and more. With 3 inflation modes (High speed, Low speed or Ball modes). It has a digital pressure gauge with added convenient functions. The machine stops automatically when target pressure is reached. It also remembers the pressure setting last time you power off. Excess air can be released by pressing and holding the air release button. A battery protection circuit protects against overloading, over-discharging and over-heating. Supplied with: 1 x Swim Ring Adaptor, 1 x French Adaptor, 1 x Dunlop Adaptor and 1 x British Adaptor. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Max. Flow Rate: 22 L/min.Max. Pressure: 11.1 bar.Hose Length: 0.65m.
