The Bosch GPB 18VH-6 SRC Professional Radio runs on both AC power and Bosch Li-ion batteries. You can charge your 12V and 18V batteries when the radio is running on mains. Delivers outstanding crystal-clear sound via multiple sources: DAB+, FM, Bluetooth®, AUX as well as Multi-Speaker Sound. Multi-Speaker Sound allows you to share and connect music streams on multiple compatible devices via Bluetooth®. It has a large display and user interface, and you can place your smartphone on the radio handle. Bonus: It even has a bottle opener. The GPB 18VH-6 SRC Professional includes an USB port for charging smartphones. It also has a simple 18V battery removal mechanism: Simply pull the lever and the battery is unlocked and ejected – no need to press the red button and fumble to get the battery out of the compartment.This robust radio has a protective frame and is easy to transport thanks to its L-BOXX compatibility – simply click your radio onto another L-BOXX and you are good to go. IP54-protected when running on battery and all compartments are closed.Comes as a Bare Unit, NO Battery or Charger.Supplied with: 1 x Screen Protective Film, 1 x Bottle Opener and 2 x 1.5V LR03 Batteries (AAA).Compatible with all Bosch Professional 12V and 18V batteries. Also compatible with AMPShare, the multi-brand battery alliance.Specifications:Input Voltage(s): Mains 220-240V, Battery 12.0-18.0VRadio Frequency Range: FM 87.5-108 MHz, DAB+ 174.928-239.2 MHzStation Presets: FM 5, DAB+ 5IP Protection Type: IP54Weight: 8.2kg excl. battery
The Karcher Flat-Pleated filter is suitable for use with the WD4 Premium multipurpose vacuum. It packs an impressively large filter area into a very small space for optimum efficiency. In addition, one filter can be used for wet and dry vacuuming without replacing the filter. Contained within a filter box, this filter can be replaced quickly and easily with no contact with dirt.
Bosch GSB 21-2 RE Professional Impact Drillwith a high-performance motor and sturdy metal gear housing for a long lifetime. The anti-rotation mechanical overload clutch provides a high level of work safety, even in the toughest applications. Supplied with: 1 x Keyless Chuck 13mm, 1 x Auxiliary Handle, 1 x Depth Stop 210mm and 1 x Carry Case. Specifications: Bit Holder: 1/2in-20 UNF.Input Power: 1,100W.No Load Speed: 0-900/3,000/min.Impact Rate:0-15,300/51,000/bpm.Max. Torque: 40Nm.Weight: 2.85kg.
The Bostitch 16 gauge FN1664-E finish nailer represents great value for money with the design incorporating class leading features. The FN1664-E has a light weight magnesium construction body, no-nail lockout, rear exhaust and selectable trigger without compromising the high durability and build quality that has made Stanley Bostitch the market leader in performance pneumatic tools for construction. Comes complete with 1000 fasteners and heavy-duty carry case. Specification Magazine Capacity: 110 (max).Fires: SB16 Series: 25-64mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Weight: 1.7kg.
Bosch GOP 12V-28 Professional Multi-Cutter with brushless motor. Its superior Starlock interface with an optimised 3-dimensional tight-fitting connection between the machine and accessory delivers the highest possible power transmission for faster working progress. The multi-tool´s smallest handle grip makes it very ergonomic and easy to operate. Additionally, its lightweight design provides comfortable handling and convenience of use. It also includes features such as Constant Speed, magnetic mounting and Speed Selection. Intended for drywall cutouts, kitchen fitting applications, and sanding. It can be used in wood, plastic, and metal. It is compatible with the Starlock system. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 12V batteries and chargers (Professional 12V System). Specifications: No Load Speed: 5,000-20,000/min.Oscillation Angle: 1.4 degree.Weight: 0.81kg excl. battery.
The DEWALT DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planing performance combined with extended run time. Lightweight, compact and ergonomic design for comfortable use in all orientations. The large twin blade drum is fitted with TCT blades for high quality surface finish. On-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. DCP580P2: 2 x 18V 5.0Ah XR Li-ion Batteries.DCP580N: Bare Unit, No Battery or Charger Supplied.DWV9390: Replacement Dust Bag. Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades, 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate. Specification No Load Speed: 15,000/min.Cutting Depth: 2mm, Rebate Depth: 9mmPlaner Width: 82mmWeight: 2.5kgThe DEWALT DCP580N XR Brushless Planer is supplied as a Bare Unit, No Battery or Charger Supplied.
The Weller Cordless Butane Soldering Iron & Heat Tool provides continuous non-stop soldering. With quick and easy butane refills, refill in under 20 seconds. One refill provides up to 60 minutes of continuous use. For added safety, the iron automatically shuts off into a 'locked' position when the cap is closed. Save time and effort by easily swapping tips without the need of a tool. It is easily converted for hot air/torch applications. Specifications: Max. Temperature: 454°CTip: Conical 0.4mmWeight: 200g
1 x Weller Cordless Butane Soldering Iron & Heat Tool 25W-75W.
The Bosch GAS 18V-1 Professional Handheld Vacuum Cleaner has 2 rotational airflows preventing the filters from clogging, providing persistent and uninterrupted suction power. Its optimised motor enables a longer run time, delivering 42 minutes of run time with an 18V 6.0Ah battery (NOT supplied). The combination of the ergonomic design and balanced shape provides extremely comfortable handling. Comes as a Bare Unit, NO battery or charger in a cardboard box. Supplied with: 1 x Crevice Nozzle, 2 x Suction Tubes, 1 x Flexible Extension Tube and 1 x Floor Nozzle. Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Container Volume:0.7 litre.Max. Airflow Rate (turbine): 10.0 L/sec.Max. Vacuum Pressure (turbine): 60 mbar.Filter Surface Area:55cm².Weight: 1.3kgexcl. battery.
The Bosch GSB 18V-65 Professional Combi Drill performs tough drilling applications with ease thanks to improved 65Nm torque. Switchable KickBack Control prevents accidental tool kickback, keeping you safe. Tight, awkward spaces are no problem with this compact tools handy head length of only 175mm. Plus, you get even more illumination power for your working space with the dual working lights.Whether youre a cabinet installer, carpenter, electrician, metal worker, or mason, the Bosch GSB 18V-65 Professional drill driver is your go-to tool for tough screwdriving applications. It can handle wood drilling up to 35mm, wood screwdriving up to 10mm, and metal and masonry drilling up to 13mm.Comes as a Bare Unit, NO battery or charger supplied.Specifications:Chuck Type: 13mm KeylessChuck Capacity (min./max.): 1.5/13mmNo Load Speed: 0-550/0-2,200/min.Impact Rate: 27,000/bpm.Torque Settings: 20Weight: 1.12kg excl. battery
Flex Power Tools DGE 25 18.0-EC C Straight Grinder has a brushless motor with greater efficiency and a longer service life. Other features include speed preselection in 4 steps, CDC constant electronics, soft start, overload protection, restart lock and temperature monitoring. An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. It's long-necked design provides optimum handling and enables you to reach into hard-to-access areas. The spindle lock allows for easy tool change. A protective metal grille (removable) provides protection against dust ingress. The ideal tool for grinding, deburring, freehand milling, cutting, rust removal.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 10,000/15,000/20,000/25,000/min.Max. Sanding Wheel Diameter: 50mmWeight: 1.47kg (without battery pack)
Bosch GSS 12V-13 Professional Orbital Sander for always-on-the-go professionals. Maximum control thanks to excellent tool balance and superior ergonomics (palm rest and grip). It has a compact, lean design ideal for all hard-to-reach areas. Easy to handle thanks to its intuitive operating concept and the interchangeable sanding plate system. Ideal for basic and in-between sanding, lacquer removal, and finishing surfaces. It can be used on wood, veneer, lacquer, and filler, as well as mineral and acrylic. Compatible with the Bosch Click Clean dust extraction system. Comes as a Bare Unit, NO battery or charger, Compatible with all Bosch Professional 12V batteries and chargers (Professional 12V System). Supplied with:3 x Sanding Sheets C470, Best for Wood Paint, 120, 1 x Base Plate with Sanding Plate 113 x 101mm, 1 x Delta Base Plate with Sanding Plate 100 x 150mm, 1 x Base Platewith Sanding Plate80 x 130mm, 1 x Hole Punch, 1 x Dust Bag and 1 x L-BOXX 136. Specifications: Oscillating Speed: 12,000-20,000/min.Oscillating Diameter: 1.6mm.Delta Sanding Plate w/ Hook Loop (length x width): 150 x 100mm.Sanding Plate w/ Hook Loop (length x width): 100 x 110mm.Weight: 0.8kg excl. battery.
The Evolution DWP1000 Evo-System Dirty Water Pump has been designed to use with the Evo-System EVO200 Engine. It has a robust, potable design that is protected by a sturdy steel frame, which also enhances the pump's portability. Features a 3in (75mm) diameter inlet and outlet ports, it pumps up to 1000 litres of water per minute. The perfect solution when you need to move water quickly and efficiently. Supplied with an inlet filter which helps prevent unwanted debris from entering the pump. Specification: Flow Rate: 1000l/min.Max. Solids: 8mmInlet & Output Diameter (Inlet Filter): 75mmPump Lift: 28mSuction Height: 8mDimensions (H x D x W): 395 x 345 x 300mmWeight: 10.7kg
The DEWALT DCS353 XR Brushless Multi-Tool has a dual-grip variable speed trigger, with a lock-on feature that allows greater control when cutting/scraping/sanding. A quick-change accessory system allows blades and attachments to be changed quickly. Its universal accessory adaptor enables use with most oscillating tool accessory brands. The compact, lightweight design allows improved access into confined spaces. Fitted with an airlock compatible dust adaptor for quicker/more secure dust extraction connection/performance. There is also a bright LED light that illuminates dark work surfaces for accurate cutting. Specification: No Load Speed: 0-18,000/min.Oscillation Angle: 1.6 degreeWeight: 0.86kg (without battery)The DEWALT DCS353N XR Brushless Multi-Tool is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCD150 XR FlexVolt Diamond Drill has a powerful brushless motor and 3 speed gear box, provides maximum performance. It's easy to select the correct speed/core size thanks to the 3 mode selector switch.Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app.Works with WTC water supply or dust extraction. Compatible with the DEWALT DCPS151 POWERSHIFT Core Drill Stand (Sold Separately).Specifications:Core Bit Connection: 1 UNC (external) / BSP (internal).No Load Speed: 0-450/0-900/0-1,400/min.Max. Core Drilling Diameter: 162mm.Weight: 4.1kg.
This DEWALT DCD150X2 XR FlexVolt Diamond Drill is supplied with:2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries.1 x Charger.
The Bosch GBA Li-ion Battery Pack has a compact design with robust housing and a handy fuel gauge. Bosch CoolPack technology prevents damage from heat concentration to offer superior run time. The special heat-dissipating housing at the base of these Li-ion batteries protects the cells inside from heat damage and is 100% compatible with all Bosch blue Li-ion power tools and chargers within the same voltage group. Up to 100% longer lifetime due to the Bosch CoolPack active temperature management.
Senco Finish Pro18 Nailer & Compressor Kit allows the user to just plug in and work, containing all you need to get nailing in minutes. Ideal for applications such as trim, beading, upholstery and mouldings. Comes with: 1 x SENCO Finish Pro 18Mg 18-Gauge Brad Nailer. It has a lightweight magnesium body that is ultra light, and can drive brads from 15-50mm. Has an oil free design, selective trigger, rear exhaust, and rotating belt hook. Reg. Operating Pressure: 4.8-8.3 bar. Air Consumption: 2.4 scfm.Air Inlet: 1/4in NPT.Weight: 1.12kg. 1 x SENCO PC1010 3-litre Compressor 1HP. PC1010 is a compact, ultra-quiet, portable compressor, with a 1HP motor and a 3 litre aluminium tank. Offering portable pneumatic power for a wide-range of applications, including 2nd-fix joinery, upholstery, sheathing, pipe-testing, beading and trim. Air Displacement: 34 Litres/min.Max Air Pressure: 8 bar.Weight: 9.1kg. Together with these you also get a 1/4in recoil hose, all necessary air fittings, safety glasses, manuals, and a variety pack of 18 gauge brad nails. All kit contents come with a 1 Year Warranty.FinishPro18 Nailer & Compressor Kit 1Hp 110 Volt Version
The DEWALT DCS356P2 XR Oscillating Multi-Tool is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x 10.8-18V DCB115 XR Li-ion Multi-Voltage Charger1 x TSTAK™ II Toolbox
The NEW SXE 450 TurboTec boasts many new features over its predecessor. It has more power, but at the same time is more compact and 500 grams lighter. It also comes with an Intec dust filter unit to help aid dust containment, plus a new TurboBoost switch for maximum stock removal. The new TurboBoost switch also boosts performance. Improved ergonomics and styling for greater working comfort. Improved gearing and bearing system reduces vibration by 25% for greater working comfort and safety. The orbit diameter range has increased from 3 - 6mm to 2.8 - 6.2mm giving a finer finish (2.8mm) and higher stock removal (6.2mm) capability allowing the machine to work harder so you dont have to. Improved dust retention system through use of the Metabo Intec filter cartridge. Specification: Input Power: 350WOscillating Speed: 0-13,100/min.Oscillating Diameter: 2.8 or 6.2mmBase Plate: 150mmWeight: 2.2kg1 x Metabo SXE-450 Variable Speed Orbital Sander 150mm 350W 240V Supplied with: 1 x Hook & Loop Sanding Pad, 1 x Hexagonal Wrench, 1 x Removable Side Handle and 1 x Textile Dust Bag.
The Einhell TE-SG 18/10 Li-Solo Power X-Change Caulking Gunis the ideal addition to the basic range in the workshop, but also for the craft room and especially when regular repairs or major renovation and refurbishment work is required. Suitable for all commercially available 310ml cartridges. The robust materials ensure longevity even in adverse conditions and for regular use, and the softgrip provides a firm, secure grip during operation. The cartridge gun has a maximum squeezing force of up to 2,000N, a uniform pattern is obtained by the adjustable squeezing speed with an adjusting wheel and a pressure switch. The rotational speed can be adapted to the different materials and quantities with which work is carried thanks to the individual adjustment. A return mechanism eliminates dripping and sticking on surfaces the gun is placed on. The bright LED light offers an optimal view of the application area, even in dark areas. Member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Feed Speed: 10 mm/s.Dispensing Force: 2,000N.Cartridge Size: 310ml.Weight: 1.94kg.
The Bosch GBM 13-2 RE Professional Rotary Drill has a powerful motor and high torque deliver for fast work progress, enabling the drilling of holes in steel of up to 13mm in diameter. Its 2-speed gearbox and speed preselection setting wheel allow for accurate performance in versatile applications. The GBM 13-2 RE Professional includes the option of selecting 1 out of 3 different chucks, and features right-left rotation, rotation control clutch, and speed selection, as well as variable speed. Its compact, ergonomic design provides good tool handling for precise work. Intended for drilling in metal and wood. Supplied with: 1 x Keyless Chuck 13mm, 1 x Auxiliary Handle, 1 x Depth Stop 210mm. Specifications: Chuck: 13mm Keyless.Drill Spindle Connecting Thread: 1/2in-20 UNF.Spindle Collar Diameter:43mm.Input Power: 750W.No Load Speed: 0-1,100/3,300/min.Max. Torque:39.5 / 12.5Nm.Drilling Diameter: Aluminium 20/12mm,Wood 32/20mm,Steel13/8mm.Weight: 2.4kg.
The HiKOKI WH18DAW4Z Multi-Volt Impact Driver has a compact and lightweight design for optimum manoeuvrability. A variable speed trigger provides optimum control during operation. Fitted with an ergonomic soft grip for optimum ease of use and safe, and comfortable handling. There is also an integrated LED light for good illumination of the work area. Specifications: Bit Retainer: 6.35mm.No Load Speed: 0-2,700/min.Impact Rate: 0-3,600/BPM.Max. Torque: 140Nm.Capacity: Ordinary Bolt M5 - M14, High-Tension Bolt M5-M12.Bare Unit Weight: 0.8kg.
The DEWALT XR POWERSTACK Slide Battery features stacked pouch cell battery technology providing a low impedance construction, the rate of flow of electrons is much higher thanks to the innovative internal pouch battery connectors, and electrodes. The XR Slide Battery provides a greater surface area versus a traditional cylindrical battery cell type, and it also benefits from superior thermal performance, versus cylindrical batteries. This increases battery durability, and improves the cycle life and results. The XR works with the complete line of 18V XR tools and chargers, bringing a new lease of life and power to existing power tools.This DEWALT DCBP518H2 POWERSTACK Slide Battery Twin Pack contains; 2 x 18V DCBP518H2 POWERSTACK Slide Batteries 5.0Ah Li-ion.
The Evolution F210CMS TCT Multipurpose Compound Mitre Saw utilises patented Evolution multipurpose cutting technology and will cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. The top clamp and extendable fence provide increased work piece support for larger jobs. The F210CMS Compound Mitre Saw is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish. It is lightweight and portable, fitted with an integrated carry handle. The compact design makes it easy to store after use. Supplied with: 1 x FURY® Multipurpose TCT Circular Saw Blade 210 x 25.4mm x 20T, 1 x F210CMS Work Piece Clamp, 1 x (Blade Change) Allen Key 6mm and 1 x Dust Bag Specification: Input Power: 1,200WNo Load Speed: 3,750/min.Cutting Capacity (W x D): Cross Cut (0° x 0°): 125 x 55mm, Bevel Cut (0° x 45°): 125 x 35mm, Mitre Cut (45° x 0°): 85 x 55mm, Compound Cut (45° x 45°): 85 x 35mmMax. Bevel Left: 45°, Max. Mitre Left/Right: 50°/50°Blade Size: 210 x 25.4mm BoreDust Port Ø: 35mmCable Length: 2mWeight: 5.8kg
Senco Screwdriver bits to suit DS5550 / DS5525. All bits are tapered and hardened to ensure smooth and long-lasting drive capability. Suitable for both cordless and mains operated machines.Senco DS5550 / DS5525 Screwdriver Bit PH2 2 pack Overall Length: 175mm
The DEWALT DCF891 XR 1/2in Hog Ring Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility. The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.The DEWALT DCF891H2T XR BL 1/2in HR Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility.The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. It is supplied with:2 x 18V POWERSTACK Li-ion Batteries 5.0Ah.1 x DCB1104 Charger.1 x TSTAK Heavy-duty Kitbox. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.
The Olympia Tools® Jigsaw has a powerful motor. Its adjustable steel base allows for bevel cuts up to 45°. Fitted with an ergonomic soft grip for increased user comfort. Dust extraction is possible via an adaptor (supplied), enabling you to keep the workplace clean and free of debris. Supplied with: 1 x Vacuum Cleaner Adaptor and 1 x Hex Key. Specification: Input Power: 450WStrokes at No Load: 3,000/min.Stroke Length: 18mmBevel Capacity: 45°Capacity: Steel 6mm, Wood 55mmWeight: 2.0kg
The Vitrex MIX1400 Power Mixer is ideal for mixing cement, plaster, grout, adhesives, fillers, paint plus other mortars for construction. The mixer is lightweight for comfortable handling and carrying, and has 2 gears for high performance. The speed is electronically controlled, and is lockable for continous operation. Specification Mixing Paddle: 140mm, M14 Thread.Input Power: 1,400 Watt.No Load Speed: 300-700/min.Weight: 7.5kg.Vitrex Power Mixer 1400 Watt 240 Volt Version.
The SCANGRIP AREA 10 CONNECT provides a diffused and uniform light up to 10,000 lumen which is ideal for the professional user who requires powerful and efficient illumination of the entire work area carrying out any kind of repair, paint or construction work. Changes between 360 degree and 180 degree illumination according to the work task, with a built-in dimmer function enabling you to adjust the light output into five different levels. Integrated Bluetooth light control makes it possible to turn on/off the work light and adjust the light output through a mobile device, saving you time from manual operation and increases work efficiency. It has a compact design with a carrying handle, makes it extremely handy and easy to move around. It is also supplied with a hook for flexible positioning and can be mounted directly on the SCANGRIP TRIPOD (SOLD SEPARATELY). Dust and waterproof, IP65, and supplied with a built-in power bank with USB outlet to charge mobile devices. Comes as a Bare Unit. Can be powered by:-METABO/CAS Batteries 12V 4.0Ah - 18V 5.2Ah-CONNECT POWER SUPPLY-A 18V battery from a leading power tool brand, such as Milwaukee, DeWalt, Makita, etc., by using the SCANGRIP CONNECT CONNECTOR. Specifications: Luminous Flux, Max./Min.: 10,000/1000 Lumens.Illuminance, Max.Min. (@0,5m): 3,000/300 Lux.Illuminance Distance: 0.50m.Beam Angle: 360 degree.Dimensions: 395 x 200 x 212mm.Weight: 3.7kg.
Kärcher KFI 357 Fleece Filter Bags have been additionally adapted for the Kärcher WD 3 P Wet & Dry Vacuum Cleaner and Kärcher SE 4001 Spray Extraction Cleaner. They stand out on account of their extremely tear-resistant material, their optimum suction power and their high level of dust retention. Ideally suited to demanding applications, e.g. for the suction of coarse and moist dirt. Pack Quantity: 4
