DEWALT DCG406N XR Brushless Angle Grinder with paddle switch operation. An electronic brake stops the wheel quickly when the trigger is released, whilst an electronic clutch reduces the kickback reaction in the event of a pinch or stall. A mesh cover restricts dust being sucked through the motor, prolonging motor life. The ergonomic design includes a rubber overmould for increased grip and comfort. Its two-position side handle allows for greater comfort and control. Bare Unit - No Battery or Charger supplied. Specification: No Load Speed: 9,000/min.Max. Disc Diameter: 125mm.Spindle Thread: M14.Weight: 1.75kg.
The DEWALT DCF891 XR 1/2in Hog Ring Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility. The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.The DEWALT DCF891N XR Brushless 1/2in Hog Ring Anvil Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT 12V XR Li-ion Battery offers up to 50% more runtime than the DCB127 (10.8V 2.0Ah Li-ion) and is approximately the same size and weight, giving you more power with the same ergonomics. The battery has no memory effect and virtually no self-discharge for maximum productivity and less downtime. It is also fitted with an LED state of charge indicator that helps to manage charging/working time. It works with all 10.8V and 12V XR tools and most XR chargers.
The DEWALT DCD991 Brushless Drill Driver has a 3 speed, all metal high performance transmission that has been optimised for fast application speeds and improved run-time. The DEWALT-built high power, high efficiency brushless motor delivers up to 57% more run time over brushed motors. With a heavy-duty 13mm ratcheting keyless chuck with carbide inserts for superior bit gripping strength. Also fitted with a 3-Mode LED that provides lighting in dark or confined spaces up to 20 times brighter than previous models. Supplied with: 2 x 18 Volt 5.0Ah Li-Ion Batteries, 1 x Charger, 1 x Belt Hook, 1 x 360° Side Handle and 1 x Kitbox. Specification Chuck: 1.5-13mm Keyless.No Load Speed: 0-450/0-1,300/0-2,000/min.Max Torque: 95Nm, 11 Settings.Capacity: Metal: 15mm, Wood: 55mm.Weight: 2.0kg.
The DEWALT DCS579NT XR FlexVolt Circular Saw is supplied with the following: 1 x 190mm x 24T TCT Blade1 x Rip Fence1 x Dust Extraction Port (Airlock)1 x TSTAK™ VI Case Bare Unit - No Battery or Charger supplied.
The DEWALT DCH334X2 XR FlexVolt Brushless SDS Plus Hammer is supplied with a quick- release SDS Plus tool holder and keyless chuck for easy switching between hammer/rotary hammer and rotary only applications. Has a brushless motor for extreme runtime and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 30mm. Also fitted with a bright white LED with delay feature that improves visibility. DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime. Specification Battery Capacity: 9.0Ah@18 Volt & 3.0Ah@54 Volt.Modes: Rotary, SDS Hammer, Chisel Only. No Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min with 3.5 Joules.Capacity: Concrete: 30mm, Steel: 13mm, Wood: 26mm.Weight 3.7kg.
DEWALT DW872 Metalica Chopsaw has a high power 2200 Watt motor with electronic soft start for metal cutting. The 25.4 mm arbor fitment takes a variety of metal saw blades, whilst the large tool-free pivoting fence for parallel and mitre cuts up to 45°. Robust cool-running 355 mm, 70 tooth tungsten carbide tipped blade which also gives burr-free cuts at constant cutting depth throughout the life of the blade. The quick retracting guard that gives increased visibility. The ergonomically designed horizontal handle gives greater comfort and the vertical clamping system allows for greater safety. Extra wide steel base gives a larger working area and increased stability and features a easy-handling transport lock-mode. Specification Input Power: 2,200 Watt.No Load Speed: 1,300/min. Max. Cutting Capacity at 90 ° Square Profile 100 x 100 mm.Max. Cutting Capacity at 90 ° Rectangular Profile 75 x 130 mm.Max. Cutting Capacity at 90 ° Rounded Profile 130 mm.Max. Cutting Capacity at 90 ° L Shape Profile92 x 92 mm. Max Cutting Capacity at 45° Square Profile79 x 79 mm.Max Cutting Capacity at 45° Rectangular Profile79 x 123 mm. Max Cutting Capacity at 45° L Shaped Profile56 x 56 mm.Max Cutting Capacity at 45° Rounded Profile 79 mm. Weight: 22.5kg.DEWALT DW872 355mm Metalica Chopsaw 2200 Watt 110 Volt Version
The Evolution HDG2002 Digital Heat Gun has a powerful motor and variable airflow speed making it ideal for stripping paint/varnish, curing glues & epoxies, removing adhesive labels/graphics and many more. It also gives instantaneous heat, ideal for heat shrink tubing which is used to insulate wires offering abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical engineering. Other key features include a clear, easy-to-understand digital display and an integral base stand for 'hands free' use. Supplied with a carry case, four nozzles and a scraper. 1 x Reducer Nozzle, ideal when you need to apply heat to a specific area. 1 x Glass Protector Nozzle, perfect for stripping, ensures direct heat is kept off window frames. 1 x Reflector Nozzle, wraps around a metal pipe to distribute the heat evenly around the pipe surface. 1 x Flat Nozzle for spreading the hot air over a long area that is wide. Specification Input Power: 2,000WAir Flow: 120-550 l/min.Air Temperature: 50-630°C
The Evolution R225DWS Telescopic Dry Wall Sander has a powerful motor for sanding joints in plaster walls and ceilings, or removing old finishes. It offers sanding with variable speeds (for different materials), tackling the job up to ten times faster than conventional methods. It is comfortable and flexible in operation, with a 0-90° pivoting head, ensuring you follow the contours of the work surface, in any direction. The telescopic design extends this lightweight dry wall sander to 1.97 metres in length, making it easy to sand those hard to reach areas comfortably. Other features include soft grips on the main handle and bail handle for effective control and perfect weight balance. This dry wall sander is equipped with LED lighting allowing you to see any shadows created by unsmooth areas, when lighting is insufficient. Supplied with: 6 x 225mm Sanding Discs (One of each: 60, 80, 120, 150, 180 & 240 Grit). and 1 x 4m Vacuum Hose. Specification Input Power: 710WNo Load Speed: 600-1,500/min.Pivoting Head: 0-90°Max. Length: 1.97mWeight: 5.8kg
The Record Power BS250 Benchtop Bandsaw has a strong steel frame, dynamically balanced bandwheel, cast iron table and an induction motor. The table tilts from 0-45º on a solid trunnion with easy to read scale. Fitted with a strong fence that has a cam action lock for ease of use and simple tension adjustment for clamping strength (clamps at rear of table). Its blade guides are simple to set and easily adjustable. The BS250 has a solid, finely ground cast iron table top provides an ideal, low friction work support. With a strong tension system that requires more than adequate tension for blade capacities of this model and 'sealed for life bearings' that require no maintenance during the working life of your machine. A compact machine designed to offer those with limited space or budgets a real bandsaw with sensible capacity and performance, as an alternative to lightweight hobby machines. The machine can be bench mounted or fitted to the optional stand and wheel kit (NOT SUPPLIED) providing great flexibility in a tight space.
The Record Power BS250/AW Stand & Wheel Kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis. Simply depress the foot pedal and the machine is lifted onto castors for easy movement, press the foot pedal again to lower the bandsaw onto its legs again.
Senco screwdriver bits to suit DS300. All bits are tapered and hardened to ensure smooth and long-lasting drive capability. Suitable for both cordless and mains operated machines.Senco DS300 Screwdriver Bit SQ2- Pack of 2. Overall Length: 227.7mm
The Senco AC8305 Low Noise Compressor offers oil free working. Its compact design and convenient carry handle make it easy to transport. Reduced vibration and noise level (only 60 dB) make it possible to place the compressor directly at the place of use. Suction feet provide enhanced stability. Ideal for running 2nd-Fix nailing and stapling air tools. Specification: Air Displacement: 33 l/min @ 6 barMax. Air Pressure: 9 barHorsepower: 0.5 hpTank Capacity: 5 litreWeight: 14.1kg
The Makita DUB185 LXT Blower has a variable speed control trigger with 3 air volume settings: low, medium and high. It also has a vacuum function and can be used as a vacuum with a dust bag. The compact, lightweight design incorporates an ergonomic soft grip for added comfort and control. Equipped with a battery protection circuit which is designed to protect the battery from damages due to over-discharge, high temperature, or overload current. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 0-18,000/min.Max. Air Speed: 98 m/sec.Max. Air Flow Rate: 3.2 m³/min.Weight: 2.1kg
The Makita DUB362 Brushless Blower has been developed as the most powerful cordless blower with a brushless motor for increased runtime, high air volume and speed. Powered by two 18 Volt Li-Ion batteries (NOT SUPPLIED) in series to supply energy to the powerful 36 Volt DC motor drive system. Has a lightweight, compact design for single handed operation with a lock on function, the button is operable from either side of handle. 6-stage air volume/velocity settings via a dial with variable speed control by trigger. Supplied with a 3-stage telescopic long nozzle that has an adjustment range of 100mm. Comes as a Bare Unit, No Battery or Charger. Specification No Load Speed: 11,400/21,500/min.Max. Air Flow: 27/54m/s.Max. Air Flow Rate: 6.9/13.4m³/min.Weight: 1.4kg
The Makita DTW190 LXT Impact Wrench features an 1/2 inch square drive shank that takes standard impact sockets. Offers forward/reverse rotation with a variable speed control trigger for increased control. The ergonomically designed handle with rubberised soft grip fits your hand perfectly to provide maximum control and comfort. Equipped with Battery protection circuit which is designed to protect the battery from damages due to overdischarge, high temperature or overload current. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 1/2in SquareNo Load Speed: 0-2,3000/min.Impacts Per Min: 0-3,000/bpmMax. Torque: 190NmCapacity: Bolt: Standard M8-M16, High Tensile M8-M12Weight: 1.7kg
The Makita DDF453 LXT Drill Driver has a 2-speed gearbox and variable speed trigger. The compact, lightweight design incorporates an ergonomic soft grip. Fitted with single sleeve, keyless drill chuck for easy bit installation and removal. Comes as a Bare Unit, No Battery or Charger. Specification: Chuck: 13mm KeylessNo Load Speed: 0-400/0-1,300/min.Max. Torque: 42Nm, Settings: 16 + DrillDrilling Capacity: Wood 36mm, Steel 13mmWeight: 1.7kg
The Weller Cordless Butane Soldering Iron & Heat Tool provides continuous non-stop soldering. With quick and easy butane refills, refill in under 20 seconds. One refill provides up to 60 minutes of continuous use. For added safety, the iron automatically shuts off into a 'locked' position when the cap is closed. Save time and effort by easily swapping tips without the need of a tool. It is easily converted for hot air/torch applications. Specifications: Max. Temperature: 454°CTip: Conical 0.4mmWeight: 200g
1 x Weller Cordless Butane Soldering Iron & Heat Tool 25W-75W.
The DEWALT DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to its central motor position. With a four position blade clamp that allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut. Ideal for wood and metal installation trimming and demolition cutting applications. Bare Unit, No Battery Or Charger Supplied. Specification No Load Speed: 0-2,900/Min. Stroke Length: 28.6mm.Capacity: Wood: 300mm, Steel Sections & Pipes: 100mm, PVC: 160mm.Length: 363mm. Height: 203mm.Weight: 2.3kg.
The DEWALT DCE530 XR Cordless Heat Gun can be used for a multitude of applications on site, such as: shrinking electrical tubing, bending PVC pipes, drying materials, loosening nuts and bolts etc. It has a compact design that is easy to use. The lock-on button allows the heat gun to be kept on, improving user comfort and enabling hands-free use. It also has a lock-off safety switch which prevents the trigger from being activated accidentally during transport or storage. Supplied as a Bare Unit, no battery or charger supplied. Includes 1 x Reflector Nozzle and 1 x Surface Nozzle. Specification: Airflow: 109-190L/min. Air Temperature: 290-530°CWeight: 0.5kg
The DEWALT DCD240 FlexVolt XR Brushless Paddle Mixer is the ideal tool for plasterers, tilers, flooring contractors and general builders. The high power FlexVolt battery system provides the equivalent performance of a 1.8kW corded tool with the added convenience of a cordless machine. The DCD240 uses an M14 accessory connector, enabling it to be used with standard mixing paddles. It has an adjustable 5 position speed dial (300/450/550/650/725/min). When changing speeds the motor ramps up or down slowly to enable the operator to maintain sufficient control and prevent splashes. It is also fitted with a lock of switch which helps to prevent accidental starting, e.g when changing the battery. DCD240X2: 2 x 18/54V 9.0/3.0Ah Li-Ion Batteries.DCD240N: Bare Unit, No Battery or Charger. Specification Mixing Paddle: 160mm, M14 Thread.No Load Speed: 300/450/550/650/725/min.Weight: 5.1kg.The DEWALT DCD240X2 FlexVolt XR Paddle Mixer is supplied with: 2 x 18/54V 9.0/3.0Ah Li-Ion Batteries1 x Fast Charger1 x 160mm Centre Drawn Down Swirl Mixing Paddle1 x Heavy-Duty Kit Bag
The DEWALT DCN930 XR Framing Nailer has been engineered to deliver more power, productivity and durability. Its DEWALT XR Brushless motor enables gas free true cordless operation. Designed to deliver more power to drive nails more consistently and faster. The tougher driver blade and magnesium magazine improve durability on the jobsite. Ideal for a wide range of first fix applications such as timber framing, stud work and roof battens. The optimised size allows this nailer to fit between 400mm joist centres which improves ease of use along with the increased depth range adjustment, improved magazine loading system and metal rafter hook. Two operating modes allow you to choose from bump for precision placement and sequential for faster application speeds and up to 2 nails per second.Specifications:Nail Diameter: 2.8-3.3mmNail Length: 50-90mmNail Angle: 30-34°Head Geometry: Clipped or Offset RoundMagazine Angle: 33°Actuating Mode: Sequential/ Contact TripWeight: 3.9kg without battery
The DEWALT DCN930N XR Framing Nailer comes as a bare unit, NO battery or charger supplied.
The HiKOKI DV20VB2 Rotary Impact Drill is a high powered, variable speed drill with 2-speed gearbox and reverse function. Fitted with a soft grip handle. Supplied with: 1 x Side Handle, 1 x Depth Stop, 1 x Carrying Case Specification: Chuck: 13mm KeylessInput Power: 790WNo Load Speed: 0-1,000 and 0-3,000/min.Impact Rate: 0-13,000/39,000/bpmCapacity: Concrete: 20mm, Steel: 13mm, Wood: 40mmCable Length: 2mWeight: 2.2kg1 x HiKOKI DV20VB2L 13mm Keyless Rotary Impact Drill 110V version.
The HiKOKI CR13V2 Variable Speed Sabre Saw has a newly designed front cover and handle for a better hold and adjustable front shoe, large trigger switch. It boasts a high cutting speed with a heavy-duty motor, quick blade change by lever and reversible blade mount for cutting up or down. Specification: Input Power: 1010WStrokes at No load: 0-280/min.Stroke Length: 29mmCapacity: Pipe 130mm, Mild Steel Pipe 19mm, Wood 300mmWeight: 3.2kg1 x HiKOKI CR13V2 Variable Speed Sabre Saw 110V version.
The Metabo KGS 305M Cross Cut Mitre Saw has a compact, light weight design with a one-handed transport design feature. Offers enormous cutting performance due to the extremely powerful universal motor and large saw blade. With a sliding function for wide work pieces. Easy saw blade change by means of a spindle lock: No dismantling of the pendulum protective cover required. Easily transported thanks to the ergonomically-designed handles and saw head lock. It has a robust die-cast aluminium design for the highest demands and offers effective dust extraction via an integrated dust scoop. Starting current limitation prevents the actuation of the lock on start-up. The saw offers fast and precise setting of common angles using stop points with a laser for exact display of the cutting line (mains powered, no batteries required). Infinitely extendable table width extension, removable to put long panels, slabs etc. Underneath. The bright LED work light provides illumination of the cutting line (mains powered, no batteries required). For safe sawing it has high sliding rear fence profiles and a material clamp for secure fixing of the work piece from the top or front. The saw head can be inclined to the left, with additional angle range for undercuts. All scales and operating elements are visible from the working position and can be operated intuitively. Specification Input Power: 1600WNo Load Speed: 3700/min.Blade: 305 x 30mm BoreTurntable Setting Left/Right: 47/47°.Max. Cutting (mm): Width 90°/45°: 305/205, Depth 90°/45°: 105/67, 90°/90°: 305x105Double Mitre: 45°/45°: 205x67mmBlade Tilt Left/Right: 47/2°Weight: 19.6kgMetabo KGS 305M Cross Cut Mitre Saw 1600W 240V Version.
The HiKOKI RB18DC Blower comes with variable speed trigger and three air volume settings for total control. There is also a lock-on button for continuous use. Its optimized air duct structure provides the best in class air volume, allowing the user to get the job done more quickly. Bare Unit, NO battery or charger supplied. Specifications: Air Volume Flow (without nozzle): 0 - 3.5m3/min.Max. Air Velocity (with nozzle): 95m/s.Average Air Velocity (with nozzle): 78m/s.Overall Length: 490mm.
The Metabo TKHS 315 M Site Saw is a precise, powerful table saw in professional configuration that quickly adapts to every application. It is fitted with a quiet induction motor that has a maintenance-free, robust design with a motor brake and overload protection. It also has restart protection that prevents unintentional start-up after power supply interruption, for complete ease of mind. There is a sturdy parallel guide/ripping fence with quick fastening combined with a mitre fence that has a linear stop, so it can also be used a sliding table. The saw blade height is freely adjustable and the saw blade inclination can be adjusted from the front. It has a sturdy, powder-coated sheet steel design with a galvanised table-top and foldable table length extension. The frame and motor are supplied pre-mounted. Ideal for sawing squared timber, boards, panels and wood-like materials in the workshop and at construction sites. Supplied with: 1 x 300mm 24 Tooth Carbide Saw Blade, 1 x Mitre Fence, 1 x 600 x 800mm Table Extension, 1 x Chip & Dust Extraction Unit, 1 x Push Stick, 1 x Wheel & Handle Set and 1 x Parallel Guide/Rip Fence. Specification Input Power: 2,500WNo Load Speed: 3,000/min.Table Size: 800 x 600mm, Bevel Capacity: 0-45°Cutting Height: 0-85mmCutting Width: Parallel Guide/Rip Fence: 340mm, Mitre Fence: 250mmWeight: 75kgThe Metabo TKHS 315 M Site Saw 240 Volt Version.
Bosch GBH 2-21 SDS-Plus Professional Rotary Hammer with three modes of operation: hammer drilling, drilling, and chiselling. This compact rotary hammer offers professional Bosch hammer drilling performance. Perfect for use in concrete, stone, and masonry. Compatible with the following dust attachments for external vacuum cleaners: GDE 16 plus, GDE 68, and GDE 162. Supplied with: 3 x SDS Plus Drill Bits: 6, 8 10mm, 1 x Auxiliary Handle, 1 x Depth Gauge, 1 x Machine Cloth and 1 x Carrying Case. Specifications: Tool Holder: SDS-Plus.Input Power: 720W.Impact Rate: 0-4,800/bpm.Impact Energy: 2 Joules.Drilling Diameter: Concrete, Hammer Drill Bits4-22mm, Metal 13mm, Wood 30mm.Weight: 2.3kg.Bosch GBH 2-21 SDS-Plus Professional Rotary Hammer 240V Version. Supplied with: 3 x SDS Plus Drill Bits: 6, 8 10mm.1 x Auxiliary Handle.1 x Depth Gauge.1 x Machine Cloth.1 x Carrying Case.
