The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)The DEWALT DCF922N XR Brushless 1/2in Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCLE15211R USB Red Rotary Li-Ion Laser is powered by an integrated USB battery, which can be charged via a USB-C Cable. Its 40 hour long-lasting battery life means you can work longer between battery changes, boosting productivity. Super fast charging, 1 hour for 100% charge, gets you back to work quickly.This laser utilises high visibility red beam diodes for better visibility, so you can easily see the laser line even in bright conditions or over long distances. Supplied with a digital detector for extended range and accuracy, allowing you to set up and measure over large areas with confidence. The integrated dual slope function enables precise setting of slopes in two directions, making it ideal for grading, drainage, and complex concrete foundation work.IP66 rated, its dust-tight and water-resistant, ensuring reliable performance even in tough jobsite conditions. the ergonomic carry handle makes it easy to transport around the jobsite and reducing fatigue.Supplied with: 1 x Detector, 1 x Detector Clamp, 1 x Remote Control, 1 x Wall Mount, 1 x Target Card, 1 x USB-C Cable, 1 x Charging Adaptor, 4 x AA Batteries and 1 x TSTAK VI Case.Specifications:Working Range: 30m (600m with detector)Accuracy: ± 2.2mm @ 30m
The DEWALT DCS781 XR FlexVolt Mitre Saw has been designed, machined and checked to the highest standards. Its cam action mitre lock function allows the user to quickly adjust the angle between 0-50 degree left and 0-60 degree right.Its large dual sliding fence provides maximum material support at any angle, whilst the 20mm horizontal rail with three linear roller bearings provide smooth movement without compromising reliability. Machined side handles, meet latest IEC table requirements, improve portability and handling.The XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity. AIRLOCK compatible dust extraction, for improved cut line visibility and a cleaner working area. Compatible with the Wireless Tool Control system. It is also Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Specification: No Load Speed: 3,800/min.Blade: 305 x 30mm Bore.Capacity: 90 degree 112 x 278mm, 45 degree 112 x 196.5mm.Max. Mitre Angle (Left/Right): 50 degree / 60 degree.Max. Bevel Angle (Left/Right): 48 degree / 48 degree.Weight: 22kg.This DEWALT DCS781 XR FlexVolt Mitre Saw 305mm has been designed, machined and checked to the highest standards. Its cam action mitre lock function allows the user to quickly adjust the angle between 0-50 degree left and 0-60 degree right.Its large dual sliding fence provides maximum material support at any angle, whilst the 20mm horizontal rail with three linear roller bearings provide smooth movement without compromising reliability. Machined side handles, meet latest IEC table requirements, improve portability and handling.The XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity. AIRLOCK compatible dust extraction, for improved cut line visibility and a cleaner working area.Compatible with the Wireless Tool Control system. It is also Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. It comes as a Bare Unit, NO battery or charger supplied. Specification: No Load Speed: 3,800/min.Blade: 305 x 30mm Bore.Capacity: 90 degree 112 x 278mm, 45 degree 112 x 196.5mm.Max. Mitre Angle (Left/Right): 50 degree / 60 degree.Max. Bevel Angle (Left/Right): 48 degree / 48 degree.Weight: 22kg.
The DEWALT D26414 digital LCD durable Heat Gun are suitable for professional applications with excellent temperature control and memory setting for consistent temperature requirements. It has optimised cooling and is compact and lightweight for easy handling and use. It is suitable for the following applications: - Stripping old paint.- Drying new coats of paint filler.- Varnish applications.- Re-melting adhesives/removing stickers.- Soft soldering pipes.- Moulding and welding plastics.- Applying tin-plate coatings and similar jobs.- Shrinking cable ends, foil and sleeves.- Welding applications, lighting barbecues.- Thawing frozen water pipes, ski waxing etc. Supplied with: Cone Nozzle and Fish Tail Surface Nozzle. Specification Input Power: 1,600W.Airflow: 650 L/minAir Temperature: 50-600°C.Weight: 0.85kg.DEWALT D26414 LCD Premium Heat Gun 1600 Watt 110 Volt Version.
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.The DEWALT DCN660D2 XR Brushless Second Fix Nailer 18 Volt comes with: 2 x 18 Volt 2.0Ah Li-Ion Batteries. 1 x Multi-Voltage XR Li-Ion Charger.1 x Heavy-Duty Carrying Case.
Makita DVC750LZ Brushless LXT Vacuum Cleaner equipped with HEPA filter. L-Class rated, removes 99.0% of dust with Limit Value for occupational exposure > 1.0 mg/m³. Suitable for both wet and dry use (remove filter for wet use). Its powerful motor provides variable suction power control (high/low) and produces extremely low noise. Compact size, easy to transport and use. Fitted with a flexible hose, with handy on-tool storage meaning everything is close to hand. Supplied as a Bare Unit - No Battery or Charger. Supplied with: 1 x Wide Nozzle, 1 x Crevice Nozzle and 1 x Hose 28mm x 2m. Specification: Max. Air Flow: 1.3/1.6m³Max. Sealed Suction: 4.2/6.7 kPaDust Bag Capacity: 7.5 litreTank Capacity: Wet: 4.5 litre
The Makita CLX228AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V HP333D 12Vmax CXT Combi Drill with 2 mechanical gears and a variable speed control trigger with both forward and reverse rotation. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. No Load Speed: 0-450/0-1,700/min.Impact Rate: 0-6,750/0-25,500/bpmMax. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mm, Masonry 8mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 4 MAKPAC Connector Case.
The Makita DLX2137PTJ LXT Twin Pack contains the following: 1 x 18V DHP482 LXT Combi Drill is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability. It also features an electric brake and variable speed control trigger. Extremely comfortable to use with its ergonomic soft grip handle and lightweight design. Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpmMax. Torque: 62Nm, Settings: 21 + DrillCapacity: Concrete 13mm, Metal 13mm, Wood 38mmScrew Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm 1 x 36V (2x18V) DHR263 Rotary SDS Hammer Drill offers 3-modes of operation: rotary only, hammer only and rotary hammer. It has a compact design that maintains easy handling and high manoeuvrability. No Load Speed: 0-1,200/min.Impact Rate: 0-4,800/bpmCapacity: Concrete 26mm, Steel 13mm, Wood 32mmWeight: 4.7kg 1 x 14.4-18V DC18RD Twin Port Charger is able to charge two Makita slide style Li-ion and NiMH batteries (with adaptor) at the same time, as fast as DC18RC charges one battery. It has a full charge sound alert and LED charging display. An electronic current limiter provides overload protection. Also supplied with: 4 x 18V 5.0Ah Li-ion Batteries, 1 x Type 3 MAKPAC Carry Case and 1 x Type 4 MAKPAC Carry Case.
The Makita DST221 LXT Stapler has a machined aluminium magazine that provides precision and durability to ensure smooth staple loading and feeding, also allowing for the use of commercial staples. There is a useful window for a clear view of the remaining staples. Fitted with a single trigger switch and a rubberised soft grip for increased comfort and control. 4-stage depth control for precise staple driving. Comes as a Bare Unit, No Battery or Charger. Specification: Staple Length/Gauge: 0.6 x 1.2mmMagazine Capacity: 98Staple Range: 10, 13, 16, 19 and 22mmStaple Width: 10mmWeight 2.1kg
The Makita DHR241 SDS Plus Rotary Hammer has 3-modes of operation: Rotary drilling, Hammer drilling or Chiseling. Fitted with a conveniently located push button for forward and reverse. The chisel can rotate a full 360° with 40 different locking positions. Fitted with high comfort grips, for maximum user comfort and a one-touch sliding chuck for easy bit changes. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 0-1,100/min.Impact Rate: 0-4,000/bpmImpact Energy: 2.0 joulesCapacity: Concrete 20mm, Steel 13mm, Wood 26mmWeight: 3.2kg
The Makita DUB362 Brushless Blower has been developed as the most powerful cordless blower with a brushless motor for increased runtime, high air volume and speed. Powered by two 18 Volt Li-Ion batteries (NOT SUPPLIED) in series to supply energy to the powerful 36 Volt DC motor drive system. Has a lightweight, compact design for single handed operation with a lock on function, the button is operable from either side of handle. 6-stage air volume/velocity settings via a dial with variable speed control by trigger. Supplied with a 3-stage telescopic long nozzle that has an adjustment range of 100mm. Comes as a Bare Unit, No Battery or Charger. Specification No Load Speed: 11,400/21,500/min.Max. Air Flow: 27/54m/s.Max. Air Flow Rate: 6.9/13.4m³/min.Weight: 1.4kg
The Makita DTM51ZJX7 Multi-Tool is supplied with: 1 x Adaptor, 1 x Segment Saw Blade, 5 x 60 Grit Abrasive Paper, 5 x 80 Grit Abrasive Paper, 5 x 120 Grit Abrasive Paper, 5 x 180 Grit Abrasive Paper, 1 x Sanding Pad and 1 x MAKPAC case. Bare Unit, No Battery or Charger Supplied
The Makita 18V Li-ion Battery provides the ultimate power to weight ratio thanks to the lightweight and shock-absorbing design. The Li-ion range delivers 430% more working capacity during the lifetime of the battery compared to NiCad and is 40% lighter than NiMH. The Li-ion has minimal depletion of power during use or in storage over its lifetime. Features: Foam cell technology. Slide-on battery, firm holding with multi contacts and shock absorbing pack. It will not puncture and remains cool even in heavy use. Makita have a comprehensive range of professional Lithium-ion tools available on the market, so whatever your trade, you will be confident that you have made the best choice. The Makita BL1830B 18V 3.0Ah Li-Ion Battery provides the ultimate power to weight ratio thanks to the lightweight and shock-absorbing design. The Li-ion range delivers 430% more working capacity during the lifetime of the battery compared to NiCad and is 40% lighter than NiMH. PLEASE NOTE this battery is supplied LOOSE. Specifications: Voltage: 18.Battery Type: Li-ion.Battery Ah: 3.0Ah.Weight: 610g.
The Makita DDF482 LXT Drill Driver has a 2-speed gearbox and variable speed trigger with both forward and reverse rotation. The compact, lightweight design incorporates an ergonomic soft grip. Fitted with single sleeve, keyless drill chuck for easy bit installation and removal. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Comes as a Bare Unit, No Battery or Charger. Specification: Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Max. Torque: 62Nm, Settings: 21 + DrillDrilling Capacity: Wood 38mm, Steel 13mmWeight: 1.5kg
The BLACK + DECKER BES602 Single Speed Jigsaw allows you to achieve precision and control for all your DIY projects. It has a powerful motor that delivers fast, high-quality cutting performance on wood, plastic, and more. The base plate can tilt up to 45° for angled cuts.The ergonomic design and lightweight body with an over-moulded rubber grip ensures comfort and control during prolonged use. A dust blow feature keeps the cutting line clear of debris for enhanced accuracy and visibility. The tool-free blade clamp allows for fast and hassle-free blade replacement.Designed for light-duty applications, this jigsaw is the ideal tool for cutting curves, intricate shapes, and straight lines in materials such as MDF, plywood, chipboard, laminate, and even plastics when paired with the appropriate blade.Supplied with: 1 x U-shank Wood Cut Blade and 1 x Carry Case.Specifications:Input Power: 400WStrokes at No Load: 3,000/min.Stroke Length: 19mmBevel Capacity: 45°Capacity: Wood 65mm, Metal 6mmWeight: 1.7kg
The BLACK+DECKER NVD220BP Dustbuster® Handheld Vacuum Cleaner is the ideal solution for small cleaning jobs. Enjoy up to 14 minutes of working time, without losing power. Thanks to the nozzle attachment, the soft brush and the rubber brush for pet hair, corners and other hard-to-reach areas are cleaned in no time.It has an ergonomic design for increased comfort during use. The large translucent, bagless dust bowl is easy to empty. Its 2-stage filter and reservoir are removable and easy to clean. Do this regularly to ensure optimal performance. Simple to recharge thanks to the included jack-plug charger and storage station.
Suction Power: 16AW
Dustbowl Capacity: 290ml
Run Time: 14 mins per battery charge
Charge Time: 5 hours
Ergonomic Design for Comfort
The BLACK & DECKER HLVC320B11 Slim Dustbuster has a compact and streamlined form factor which makes it especially easy to handle and helps to improve accessibility in tight spaces. Its integrated 2.0ah lithium ion battery will provide up to 15 minutes of continuous run time on a full charge. The retractable nozzle can be used in wide or narrow mode. Its dust bowl is easy to empty and clean, making it ideal for daily household cleaning. Supplied with a convenient charging base which also provides a handy place to store it, in between uses. Specifications: Input Power: Integrated 12V 2.0Ah Li-ion Battery.Max. Runtime: 15 Minutes.Dust Bowl Capacity: 0.13 litres.
The DEWALT DCK266P2 XR Brushless Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screw driving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/3,4000/bpmTorque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm 1 x 18V DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Torque: 26/80/203Nm. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8V, 14.4V, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TOUGHSYSTEM™ DS150 Toolbox.
The Bosch GBA Li-ion Battery Pack has a compact design with robust housing and a handy fuel gauge. Bosch CoolPack technology prevents damage from heat concentration to offer superior run time. The special heat-dissipating housing at the base of these Li-ion batteries protects the cells inside from heat damage and is 100% compatible with all Bosch blue Li-ion power tools and chargers within the same voltage group. Up to 100% longer lifetime due to the Bosch CoolPack active temperature management.
The HiKOKI G12STX Angle Grinder has a powerful motor with excellent overload durability and a top mounted on/off switch. With a no voltage restart protection feature that prevents the tool from restarting after the power has been temporarily cut off during operation. Ideal for a multitude of applications including removal of castings and finishing of various types of steel, bronze and aluminium materials etc. Supplied with: 1 x 115mm Diamond Blade, 1 x Side Handle, 1 x Wrench, 1 x Carry Case. Specification: Input Power: 600WNo Load Speed: 11,500/min.Disc Size: 115mmSpindle: M14Overall Length: 254mmWeight: 1.8kg1 x HiKOKI G12STX/J7 Angle Grinder 115mm 240V version.
The DEWALT DCR020 Digital Radio is a compact and robust DAB(+)/FM jobsite radio and can be powered by mains or by DEWALT 10.8-18 Volt XR Li-Ion batteries. The Tech Box, on-board storage protects portable audio devices and is fitted with a 3.5mm auxiliary port and a USB port that allows devices to be charged (USB charging AC only). The radio has an integral roll cage that provides impact resistance for maximum durability and a 1.8m powercord with wrap-around storage. PLEASE NOTE: This unit is a radio only and NOT suitable for charging. Bare Unit, No Battery Supplied. Specification Radio Range: DAB(+)/FM.Input Power: Battery: 10.8-18v Li-Ion, DC: 230/240v.Length: 240mm.Height: 245mm.Weight: 2.8kg.
The DEWALT DCD701 XR Sub-Compact Drill Driver has an efficient brushless motor that gives 15% more runtime than previous generation. Lightweight (0.9kg) design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg
