The Panasonic EY3640L Sealant Gun has a powerful motor that provides high pushing pressure and a high flow rate. Its comfortable, lightweight design incorporates an ergonomic soft grip for increased comfort. Specifically designed for long operating time and efficient application of large volumes of sealing material. Supplied with: 1 x 14.4V 4.2Ah Li-ion Battery, 1 x Charger and 1 x Carry Case. Specification: Capacity: 310mlPushing Pressure: 4,410N (450kgf)Weight: 2.65kg
Senco Screwdriver bits to suit DS5550 / DS5525. All bits are tapered and hardened to ensure smooth and long-lasting drive capability. Suitable for both cordless and mains operated machines.Senco DS5550 / DS5525 Screwdriver Bit PH2 2 pack Overall Length: 175mm
The Makita DJN161 Nibbler is fitted with an easy-to-operate slide type on/off switch with lock-on function. There is an anti-restart function for added safety, with warning lamp. Fitted with an ergonomic rubberised, soft grip for a comfortable and sure grip. Supplied with: 1 x Punch & Die Set, 1 x Hex Wrench and 1 x Wrench Holder. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 1,900/min.Max. Cut: Mild Steel 1.6mm, Stainless Steel 1.2mm, Aluminium 2.5mmMin. Outside Edge Cutting: 50mmRadius Inside Edge: 45mmWeight: 1.9kg
The Bostitch TU-216-2330K-E Pneumatic Headless Pinner is a compact 23 gauge headless pinner which is specially designed for fine detail work in the construction industry and industrial use. Benefits include a secondary safety trigger to reduce the risk of accidental start, auto adjusting magazine for varying pin lengths together with a rear exhaust to direct air away from the nose piece. Specification Magazine Capacity: 200 (max).Nail Range: 15-30mm.Nail Diameter: 0.6mm.Operating Pressure: 70-100 PSI, 4.8-7 Bar.Dimensions (LxWxH): 230 x 198 x 40mm.Weight: 0.984kg.
The Steinel HG2420E Industrial Barrel Grip Heat Gun has a powerful brush motor with 1,000 hours of motor life. The temperature can be adjusted electronically via a thumb wheel, in nine stages from 80-650°C. At the same time, the airflow rate varies from 150-400L/Min. The tool also features a fine dust filter to protect the internal components. The tool is also particularly easy to service, the heavy-duty power cord can easily be changed on site cutting downtime. Specification Input Power: 2,200W.Airflow: 150-400 L/min.Air Temperature: 80-650°C.Weight: 0.61kg.Steinel HG2420E Industrial Barrel-Grip Heat Gun 240 Volt Version.
The Makita DVC350Z LXT Vacuum Cleaner has a lightweight, portable design with a shoulder belt that can be easily slung over your shoulder for added mobility. Electronic 2-speed selection, allows for either high or low power settings. Large 3 litre capacity. Ideal for use in areas where a full sized dust extractor can't be used or when mains power cannot be found. Supplied as a Bare Unit, No Battery or Charger. Specification: Capacity: 3 litresMax. Sealed Suction: 5.5 kPaMax. Airflow: 3.4m³/min.Weight: 2.2kg
The DEWALT DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planing performance combined with extended run time. Lightweight, compact and ergonomic design for comfortable use in all orientations. The large twin blade drum is fitted with TCT blades for high quality surface finish. On-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. DCP580P2: 2 x 18V 5.0Ah XR Li-ion Batteries.DCP580N: Bare Unit, No Battery or Charger Supplied.DWV9390: Replacement Dust Bag. Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades, 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate. Specification No Load Speed: 15,000/min.Cutting Depth: 2mm, Rebate Depth: 9mmPlaner Width: 82mmWeight: 2.5kgThe DEWALT DCP580N XR Brushless Planer is supplied as a Bare Unit, No Battery or Charger Supplied.
The Bostitch F21PL-E Roundhead & MCN Stick Nailer has a waisted body design to improve sightline and a repositioned handle to give balance and comfort in use. Using 21° plastic collated framing nails hot dip galvanized to 50 microns and specially designed positive placement nails. This tool is perfect for all framing and first fix applications where good corrosion resistance is required and of course anywhere you need to drive a nail through a pre formed hole. Comes complete with two noses, enabling a five second change between modes via the push button depth control button. Perfect for all framing and first fix applications. Specification Magazine Capacity: 50 (max).Nail Length: PL Series: 45-90mm, MCN Series: 38-65mm.Nail Diameter: PL Series: 2.5-3.3, MCN Series: 4-4.1mm.Operating Pressure: 70-120 PSI, 5-8.25 Bar.Collation Angle: 21°.Weight: 3.7kg.
The Steinel HL1820S Pistol Grip Heat Gun has a powerful motor with approximately 600 hours of motor life. Both temperature and air flow rate is controlled in three stages. It has a balanced, lightweight design and an ergonomically shaped handle with a soft inlay that ensures optimum handling. There is also an integrated thermal cut-out that prevents over heating. The tool can be used with all industry standard nozzles, making all sorts of different applications even easier. For example de-icing, drying, shaping, heat shrinking and much more. Specification Input Power: 1,800W.Airflow: 200/300/500 L/minAir Temperature: 50/400/600°C.Weight: 0.8kg.Steinel HL1820S Pistol Grip Heat Gun 110 Volt Version.
The Paslode Li-ion Battery is a high-capacity, fast charging Lithium battery for all Paslode Impulse system lithium tools. For use with the Paslode PPN35Ci, IM360, IM65 and IM65A Lithium Nailers. This battery provides up to 7,500 shots per full charge (1 hour), 6,000 shots from a 30 minute charge and 200 shots on just a 2 minute charge.
The Black & Decker KA320EKA 1/3rd Sheet Variable Speed Orbital Sander has a large orbit size with variable speed settings for greater control when sanding. Sands flush to three sides and is ideal for use on vertical surfaces such as doors and walls, for light to medium sanding tasks. It is fitted with a large dust bag that ensures less mess when sanding for cleaner work area. The lightweight sander is fitted with front and rear handles for maximum comfort and control and offers quick and easy paper change thanks to the hook & loop or traditional clip attachment. Ideal for surface finishing of flat areas e.g. doors and tables. The removal of paint, varnish and other surface coatings. Supplied with: 5 x Sanding Sheets (80G, 100G, 120G), 1 x Large Dust Bag and 1 x Kitbox. Specification Input Power: 240WOscillating Speed: 7,000-15,000/min. Oscillating Diameter 2.0mmEccentricity: 1.0mmBase Plate: 91 x 189mmCable Length: 2.3m
Olympia Tools® 1/3 Sheet Orbital Sander is ideal for a number of sanding tasks. With front and rear soft grip handles for maximum comfort and control. Clamp paper attachment securely holds the paper in place and provides easy removal. Dust extraction is possible via an adaptor (supplied), enabling you to keep the workplace clean and free of debris. Specification: Input Power: 135WOscillating Speed: 13,000/min.Orbit Diameter: 2mmSanding Surface: 90 x 187mmSandpaper Size: 90 x 240mmWeight: 1.30kg
The Makita DC18RC 7.2-18V Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, keeping the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. With 3 active charging colours to help identify when the battery is charged, and to what level. When it is used in conjunction with the charging adaptor ADP0, this charger offers also the possibility of charging NiMH slide on batteries of 9.6-24V batteries. Or when used with charging adaptor ADP04, this charger offers the possibility to charge NiCad and NiMH rod and block batteries of 7.2-18V batteries. The DC18RC is compatible with the following battery models: BL1830, BL1430, BL3626, BL3622, BL1415, BL1013, and BL0710.
The DEWALT D26414 digital LCD durable Heat Gun are suitable for professional applications with excellent temperature control and memory setting for consistent temperature requirements. It has optimised cooling and is compact and lightweight for easy handling and use. It is suitable for the following applications: - Stripping old paint.- Drying new coats of paint filler.- Varnish applications.- Re-melting adhesives/removing stickers.- Soft soldering pipes.- Moulding and welding plastics.- Applying tin-plate coatings and similar jobs.- Shrinking cable ends, foil and sleeves.- Welding applications, lighting barbecues.- Thawing frozen water pipes, ski waxing etc. Supplied with: Cone Nozzle and Fish Tail Surface Nozzle. Specification Input Power: 1,600W.Airflow: 650 L/minAir Temperature: 50-600°C.Weight: 0.85kg.DEWALT D26414 LCD Premium Heat Gun 2000W 240V Version.
The Makita DJR188 Reciprocating Saw has a compact and lightweight design. It is fitted with a brushless motor for increased efficiency. The variable speed is controlled via the trigger and for ease of use it features tool-less blade change. It also has constant speed control. The saw features an ergonomically designed handle and a lock-off function for decreased fatigue during long periods of use. For increased user safety there is an electric brake and an LED job light for illumination in dark work spaces. Comes as a Bare Unit, No Battery or Charger. Specification: Strokes at No Load: 0-3,000/min. Stroke Length: 20mmCapacity: Wood 255mm, Mild Pipe Steel 130mmWeight: 2.9kg
The Paslode Li-ion Battery Charger has a fast charge feature and voltage sensing electronics to prevent overcharging. Suitable for charging Paslode lithium batteries only. 200 shots in just two minutes of charging. It is also compatible with the Paslode in Car Charger (900507). For use with IM360Ci, PPN35Ci, IM350+, IM65, IM65A and IM50.
The Paslode IM65 F16 Lithium Straight Brad Nailer is suitable for all second fix applications and fires 16 gauge straight brads, 16 to 64mm. Lightweight, well balanced design for easy movement in tight spaces and fatigue-free working. The easy rear loading magazine holds 2 strips of brads. Nail lockout prevents blank firing and minimises wood damage. Whilst the quick clear nose cover provides easy access in the unlikely event of a jam. Other features include: a reversible belt hook, on/off battery lock position and tool free depth adjustment. SpecificationPower (Impact Force): 30 JoulesFastener Length Range: 16-64mmFixings: Per Second: 2-3 fixings, Per Hour: 1,000 fixingsMagazine Capacity: 100Fuel Cell Capacity: 1,000 shotsBattery Capacity: 2.1AhFixings Per Battery Charge: 10,000 ShotsBattery Charge Time: 90 MinWeight: 2.1kgThis Paslode IM65 F16 Lithium 16 Gauge Straight Brad Nailer is supplied with:1 x 1.25Ah Li-ion Battery1 x Charger1 x High Impact Carry Case
The Paslode IM65 F16 Lithium Angled Brad Nailer is suitable for all second fix applications and fires 16 gauge 20° angled brads, 32 to 64mm. Its no-mar contact nose, sight lines and angled magazine aids accurate placement and prevents the need for additional fixings. Lightweight, well balanced design for easy movement in tight spaces and fatigue-free working. The easy rear loading magazine holds 2 strips of brads. Nail lockout prevents blank firing and minimises wood damage. Whilst the quick clear nose cover provides easy access in the unlikely event of a jam. Other features include: a reversible belt hook, on/off battery lock position and tool free depth adjustment. Supplied with: 1 x 2.1Ah Li-ion Battery, 1 x Charger and 1 x High Impact Carry Case Specification: Power (Impact Force): 30 JoulesFastener Length Range: 32-64mmFixings: Per Second: 2-3 fixings, Per Hour: 1,000 fixingsMagazine Capacity: 100Fuel Cell Capacity: 1,000 shotsBattery Capacity: 2.1AhFixings Per Battery Charge: 10,000 ShotsBattery Charge Time: 90 MinWeight: 2kg
The Panasonic EYC242 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball DetentNo Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpmMax. Torque: 280NmTensile Bolt Capacity: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.
