The HiKOKI G23ST 230mm Grinder has a powerful motor with improved overload durability. The motor has halved stator coils for excellent cooling efficiency, which also increases motor durability. It has a 3-position side handle and a spindle lock for increased safety. Labyrinth construction, further prolongs the tool's life, as the motor is protected from dust and debris. Supplied with: 1 x Side Handle, 1 x Spanner. Abrasive wheel NOT included. Specification: Input Power: 2,000WNo Load Speed: 6,600/min.Disc Diameter: 230mmSpindle: M14 x 2Overall Length: 469mmWeight: 5.1kg1 x HiKOKI G23ST/J2 Angle Grinder 230mm 110V version.
These Replacement Fleece Bags have been developed to perfectly fit Nilfisk Aero 20-01, Aero 20-01 Inox, Aero 20-21 Inox, Aero 20-11, Aero 20-21, Aero 25-11, Aero 25-21 range of vacuum cleaners. The bags are fitted with a polypropylene closure for an improved fit to the dust inlet pipe. They are unaffected by humidity, moisture or liquids. Keep floors clean at all times with these bags. The durable fleece material captures the dust and dirt, firmly holding it there. Supplied as a pack of 5.
The Steinel HL1820S Pistol Grip Heat Gun has a powerful motor with approximately 600 hours of motor life. Both temperature and air flow rate is controlled in three stages. It has a balanced, lightweight design and an ergonomically shaped handle with a soft inlay that ensures optimum handling. There is also an integrated thermal cut-out that prevents over heating. The tool can be used with all industry standard nozzles, making all sorts of different applications even easier. For example de-icing, drying, shaping, heat shrinking and much more. Specification Input Power: 1,800W.Airflow: 200/300/500 L/minAir Temperature: 50/400/600°C.Weight: 0.8kg.Steinel HL1820S Pistol-Grip Heat Gun 240 Volt Version.
The DEWALT DCN45RND2 XR Brushless Roofing Coil Nailer is supplied with: 2 x 18V 2.0Ah Li-ion Batteries*1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger1 x TSTAK™ Kitbox *500 nails per charge
The Einhell TH-HA 2000/1 Hot Air Gun is suitable for DIY enthusiasts on jobs involving the removal of old lacquer and paint, the fitting of plastic tubes, and much more besides. There are two power settings, so the temperature and air rate can be set for particular job requirements. Four nozzles are included for optimum adjustment of the TH-HA 2000/1 hot air gun to the particular task. There is also a paint scraper for expert removal of lacquer and paint residues from surfaces. Built-in overheat protection and the stable base ensure maximum safety, making the hot air gun also suitable for stationary applications. Supplied with: 1 x Colour Rasper, 1 x Fishtail Nozzle, 1 x Reflector Nozzle, 1 x Deflector Nozzle, 1 x Cone Nozzle and 1 x Carry Case. Specification Input Power: 2,000 Watt. Air Flow: 300/550 l/min. Air Temperature: 350/500°C.Weight: 0.70kg.
The Flex Power Tools WL LED 18.0 LED Work Light features 24 cold white LEDs and integrated discharge protection. The head can be swivelled through 320° and folded through 180°. Fitted with a swivelling hook for attaching the lamp to a rafter or belt clip. Bare Unit, No Battery or Charger Supplied. Lighting Duration: 2.5Ah approx. 20 hours; 5.0Ah approx. 40 hours
The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places. The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use. Complete with: 1 x Delta Sanding Disk, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood, 1 x Hex Key and 1 x Storage Case. Specification Input Power: 200 Watt.Oscillating Speed: 30,000-42,000/min.Oscillating Angle: 3°.Sandpaper Size: 93 x 93 x 93mm.Weight: 1.0kg.
The HiKOKI G12STX Angle Grinder has a powerful motor with excellent overload durability and a top mounted on/off switch. With a no voltage restart protection feature that prevents the tool from restarting after the power has been temporarily cut off during operation. Ideal for a multitude of applications including removal of castings and finishing of various types of steel, bronze and aluminium materials etc. Supplied with: 1 x 115mm Diamond Blade, 1 x Side Handle, 1 x Wrench, 1 x Carry Case. Specification: Input Power: 600WNo Load Speed: 11,500/min.Disc Size: 115mmSpindle: M14Overall Length: 254mmWeight: 1.8kg1 x HiKOKI G12STX/J7 Angle Grinder 115mm 240V version.
