Zenith stitched calico mop for use with polishing compounds, e.g. grey BGF/264 compound, and brown GBT/272 compound.Zenith stitched calico mop for use with polishing compounds, e.g. grey BGF/264 compound, and brown GBT/272 compound. Size: 6in x 2 Section.
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size: 60 x 30mm.Grit: Medium.
The Dormer P805 Solid Carbide Rotary Bright Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Rotary Bright Burr Ball Nosed Cylinder has the following specification: Diameter: 12.70mm.Shank Diameter: 6mm.Working Length: 25mm.Overall Length: 70mm.
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: Standard 1/4 inch. Length: 300mm.
Faithfull Forstner Bits are designed with durability, accuracy, and ease of use in mind. Manufactured from forged, hardened steel for increased longevity, they feature an ultra-sharp spur to provide accurate hole drilling without walking on the material. The steep, angled cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip removal. The centre point aids in drilling straight, angled, and overlapping holes in softwood and hardwoods, veneered wood, and non-laminated chipboard.nCompatible with all drill drivers and bench drills with a standard 8mm chuck.
1 x Faithfull Forstner Bit 12mm.
The Bosch Starlock Starter Set for general wood and metal applications. The Starlock mount provides optimum power transfer and convenient blade change within 3 seconds.Contains:1 x AIZ 20 AB BIM Plunge-cutting Metal Blade1 x AIZ 24 EC HCS Plunge-cutting Wood Blade1 x ACZ 85 EC HSC Segment Saw Wood Blade
The Flexovit Delta Hook & Loop Sanding Sheets are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes them extremely durable, long lasting and suitable for use on a variety of surfaces.Fits most brands of Delta sanders, the hook & loop backing allows quick and easy sheet changing and the perforated holes allow free and easy dust extraction. Suitable for use on: wood, paint and metal.Specifications:Size: Delta Shape, 94mm
Pack of 6 Flexovit Delta Hook & Loop Sanding Sheets 94mm Coarse 50G
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. These reciprocating blades are ideal for general purpose use in wood, metal, tough plastic and sandwich materials. The Universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2348QZ reciprocating blades are ideal for use in tough plastics, sandwich material and pipes from 3-12mm thick.
Three heavy-duty 14 meter 110V trailing leads available in 1.5mm or 2.5mm cable and 16 or 32 amp versions. All leads are fitted with an industrial plug and socket to BSEN60309 providing ingress protection to IP44 and added durability and protection from being dropped or dragged around. Trailing leads are ideal for use with transformers, site lights and power tools to extend their working range. 110VLength: 14m110V 32 amp socket110V 32 amp plug2.5mm cable
A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles.The Faithfull FAIWBWW150 conforms to ISO 9001 and DIN EN1083-1 and 2 and has the following specifications:Diameter: 150mm x 23mm faceBore size: 32mm (25, 22, 20, 16 &12mm bushes included)Wire: 0.3mmType: Circular
DEWALT Band File Sanding Belts have a heavy-duty backing cloth, resin bonded for use with belt sanders. They provide excellent grain adhesion and heat resistance for power sanding and have a high quality aluminium oxide grain for fast, aggressive stock removal and fine finishing. Anti static bond and backing ensures more efficient dust extraction, improved finish and longer life.Applications: for all stripping, sanding and finishing tasks on wood, metal and painted surfaces.
Pack of 10 DEWALT Band File Sanding Belt 13 x 457mm 120G
Three heavy-duty 14 meter 110V trailing leads available in 1.5mm or 2.5mm cable and 16 or 32 amp versions. All leads are fitted with an industrial plug and socket to BSEN60309 providing ingress protection to IP44 and added durability and protection from being dropped or dragged around. Trailing leads are ideal for use with transformers, site lights and power tools to extend their working range. 110VLength: 14m110V 16 amp socket110V 16 amp Plug2.5mm cable
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in
These round Flex sanding papers are ideal for grinding joint filler in drywall construction. When fitted on to a sander, they are ideal for processing large surfaces on walls and ceilings. The sheets are punched to enable dust extraction. They have Hook & Loop backing and are suitable for the following Flex models: GE 5 / GE 5 RGSE 5RWSE 7 Vario SetWSE 7 Vario PlusWST 700VVWST 700VV Plus.The FLX348538 Sanding Papers have the following specifications:Grit size: P220Grit type: Very fineDiameter: 225mm.Pack size: 25.
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 25mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350
The DEWALT DT2445 Reciprocating Saw Blade Set contains a selection of the most popular blade sizes. Ideal for a wide variety of applications, including: cuts in ferrous and non-ferrous metal, sheet metal, pipes, wood, wood with nails, aluminium, fibreglass and tough plastics. The blades have a bi-metal construction, they combine HCS and HSS for increased flexibility and durability. Their universal shank fits all major brands. Supplied in a durable 'flip top' plastic case, contains the following: 1 x DT2345 General Purpose Blade 152mm3 x DT2349 Fast Cut Wood with Nails & Plastics Blades 228mm2 x DT2359 Fast Cut Wood with Nails & Plastics Blades 152mm3 x DT2353 Fast Cut Metal & Sheet Metal Blades 203mm3 x DT2361 Fast Cut Metal & Sheet Metal Blades 152mm
This Stanley 61 piece set of 1/4 inch drive bits is supplied in a plastic case, and contains: 6 x Slotted bits 4, 4.5, 5.5, 6, 6.5 and 8mm. 8 x Phillips bits PH0, PH1, PH2 (x2), PH3 (x2) and PH4 (x2). 7 x Pozidriv bits PZ0, PZ1, PZ2 (x2), PZ3 (x2) and PZ4. 21 x Tamperproof Torx bits TT10 (x3), TT15 (x3), TT20 (x6), TT25 (x3), TT30 (x3) and TT40 (x3). 6 x Torx bits T10, T15, T20, T25, T27 and T30. 12 x Hex bits 2mm (x3), 3mm (x6), 4, 5 and 6mm. 1 x 1/4 in bit holder.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 16 mmD = 5 mm 13/64in
The Faithfull Splitter creates three separate 110V 16amp outputs from one input. Ideal for running multiple power tools. Conforms to IP44 for water ingress protection. Total load applied must not exceed 1760 watts (16 amps) If a transformers is in use always check its capacity before linking a splitter socket to ensure an overload does not occur.
The DEWALT reciprocating bi-metal construction blades combine HCS and HSS for increased flexibility, durability and have been designed for use with cordless machines. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil and these blades are ideal for fast cutting of metals, wood and plastics.The DEWALT DEWDT2344QZ reciprocating blades are ideal for fine, fast cuts, especially for curve cutting in wood and plastic.
These Faithfull Drywall Screwdriver Adaptors are suitable for use in hand-held drivers or power drills for driving screws into drywall. The 1/4 inch shank adaptor features a pre-set recessed collar and fitted PH2 bits, ready for use in all drywall applications.
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Metal Grinding Disc 115 x 6.5 x 22.23mm
These Faithfull Professional 1/4in Hexagon Drive Pozidriv Screwdriver Bits are manufactured from high strength, heat-treated S2 grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: PZ1 x 50mm.Pack Quantity: 3
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.
Pack of 3 Faithfull Aluminium Oxide Flap Discs 125 x 22mm 40 Grit40 Grit Aluminium Oxide Flap Disc is suitable for rough grinding and finishing of mild steel, carbon steel and alloys.Specification:Ø x bore: 125 x 22mm.
The MEXCO Pressurised Water Container provides a mobile wet cutting solution to eliminate dust build up when operating cut-off saws. With up to 3 bar working pressure there is no requirement for an external water source connection. Supplied with 4 metre hose, dust ingress prevention cover and quick connection coupling.Specifications:Capacity: 10 litre.
Faithfull Magnetic Impact Nut Driver is specifically designed and for use in high torque impact drivers. The magnetic hex socket is ideal for repetitive jobs requiring the setting and removal of bolts and nuts. Manufactured from unique high-grade steel specially engineered for extreme durability and increased working life.This Faithfull Magnetic Impact Nut Driver (8mm) is commonly used for driving self-drilling screws (Tek Screws).
MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 78mm
MEXCO GPX10-15 Concrete Diamond Blades have been specifically designed for cutting a wide range of general purpose building materials. The GPX10-15 offers a cost effective solution for the user who requires a diamond blade which can cope with the cutting of the most widely used non-abrasive building materials.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 15mm
1 x MEXCO GPX10-15 Concrete Diamond Blade 350 x 20mm
The MEXCO Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core melts, lubricates and cools when drilling. Supplied to fit M14 thread Angle Grinders although an M14 to Hex adaptor can be used with a High Speed Drill. Suitable for dry cutting.
1 x MEXCO XCEL Grade Diamond Tile Drill Bit 6mm
MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 117mm
MEXCO GPX90 Concrete Diamond Blades provide the user with excellent cutting characteristics in the majority of non-abrasive construction products used in the UK.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 10mm (12mm on 300mm + diameter)
1 x MEXCO GPX90 Concrete Diamond Blade 180 x 22mm
The MEXCO Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core melts, lubricates and cools when drilling. Supplied to fit M14 thread Angle Grinders although an M14 to Hex adaptor can be used with a High Speed Drill. Suitable for dry cutting.
1 x MEXCO XCEL Grade Diamond Tile Drill Bit 12mm
