The Faithfull Mini Holesaw with 8% Cobalt Teeth is capable of continuous drilling without clogging, thanks to its internal spring. The HSS cutting teeth provide superior durability and lifespan, while the extra sharp teeth ensure clean and accurate drilling.Specifically designed for drilling through sheet metals, it is most suited for materials up to 1.6mm thick, such as stainless steel, mild steel, and aluminium. Suitable for impact drivers with a 1/4in shank.
1 x Faithfull Mini Holesaw 18mm
MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 152mm
The MEXCO Unslotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Unslotted Dry Core Drill X90 Grade 28mm
MEXCO Professional Crown Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss. Suitable for wet cutting.
1 x MEXCO Wet Core Drill (Crown Segment) 40mm
MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bits offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to the special wax filled core which melts, lubricates and cools when drilling. For use on high speed corded drills. Suitable for dry cutting.
4 Piece MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bit Set.Contains the following sizes: 5.5, 6, 7, 8mm.
MEXCO Professional Crown Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss. Suitable for wet cutting.
1 x MEXCO Wet Core Drill (Crown Segment) 14mm
The MEXCO Unslotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Unslotted Dry Core Drill X90 Grade 102mm
DEWALT Wet Diamond Core Bits are made from high-grade steel to withstand the toughest drilling applications. The diamond turbo segments feature a serrated design to improve cooling and debris removal. Laser welded segments prevent segment breakouts during dry drilling.Suitable for a wide range of materials and drilling speeds.
1 x DEWALT DCDW101 Wet Diamond Core Bit 52mm
The IRWIN Drill Screwdriving Set is supplied in a compact carry case and contains the following: 8 x Metal Drill Bits: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0mm. 4 x Masonry Drill Bits: 5, 6, 7, 8mm. 5 x Wood Drill Bits: 3.0, 4.0, 5.0, 6.0, 8.0mm. 17 x Screwdriver Bits. 1 x Countersink. 1 x Magnetic Bit Holder.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett RG FB Carbon Bandsaw Blade 1,435 x 6 x 0.35mm x 10T.
These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 57mm
These Faithfull Multi-Functional Tool Bi-Metal Flush Cut TiN Coated Blades offer high performace and have a durable titanium coating to harden and protect the cutting and sliding surfaces, providing an improved performance and a longer working life. Compatible with many multi-function oscillating power tools.This high speed steel, bi-metal blade features milled and side set teeth for a fine straight cut in hard and soft woods and will cut copper and aluminium pipes, sheet metal and plastics. Width: 32mm.
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 610 x 100mm 120g
RUBI Diamond Flap Disc for grinding ceramic, porcelain, sintered stone and natural stone. Provides fast grinding with a long life due to the ratio of diamond concentration to diamond grit spacing.Ideal for edge and surface grinding, mitres and bevels. It comes with an aluminium M14 ADAPTOR for use with the grinder to reduce vibrations and provide better stability during work. Suitable for dry and wet grinding.Specifications:Diameter: 115mm.Grit: 50/60 Coarse.Max. RPM: 10,500/min.
The DEWALT DT3500 Twist Knot Wire Cup Brush is made of heavy-duty carbon steel, constructed with an internal holding plate to ensure consistency and safety. Excellent for rust and paint removal.Specification:Diameter: 65mmBore: 22.2mm
The Faithfull 16-piece Impact Long Bit Set features bits with increased torsion zones and shock flex due to their longer length. They are manufactured from a unique material specially engineered for extreme durability giving them an increased working life compared to standard bits. Each bit features a precision machined tip to provide an optimal fit helping to prevent screw stripping and cam-out. Contents: 4 x 75mm Phillips Bits: PH1, PH2(x2), PH3.4 x 75mm Pozi Bits: PZ1, PZ2(x2), PZ3.4 x 150mm Phillips Bits: PH1, PH2(x2), PH3.4 x 150mm Pozi Bits: PZ1, PZ2(x2), PZ3.
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 8.5mm.
IRWIN Easy Connect Set for drilling into wood, metal, stone and plastic. Supplied in a tough, durable case. Contains: 3 x Hex Shank Metal Drill Bits: 2, 3, 4mm. 3 x Hex Shank Masonry Drill Bits: 4, 5, 6mm. 2 x Hex Shank Wood Drill Bits: 6, 8mm. 4 x 25mm Phillips Bits: PH1, PH2(x2), PH3.4 x 25mm Pozi Bits: PZ1, PZ2(x2), PZ3.5 x 25mm TORX Bits: T10, T15, T20, T25, T30.4 x 25mm Hex Bits: 3, 4, 5, 6.3 x 25mm Slotted Bits: 4, 5, 6. 3 x 50mm Phillips Bits: PH1, PH2(x2).3 x 50mm Pozi Bits: PZ1, PZ2, PZ3.2 x 50mm Slotted Bits: 4, 6. 1 x Magnetic Bit Holder. 5 x Plastic Wall Plugs 5mm.5 x Screws for Wall Plugs 5mm.
Faithfull X-LOCK Twist Knot Wire Brush is for heavy-duty applications. Ideal for removing rust, paint and varnish from steel surfaces. Featuring the X-LOCK quick change system, ensuring a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Specifications: Wire Type: High Tensile Twisted Steel.Diameter: 75mm.Fitting: X-LOCK.Wire Size: 0.5mm.Max. RPM: 12500.
The Flexipad Medium Density Pads are suitable for polishing and grinding, these will accept GRIP® and hook and loop backed sanding discs. The super polyurethane backing pad is made from impact resistant synthetic nylon which is bonded to microcellular polyurethane and with internal thread to suit sanders and polishers. Excellent resistance to initial and continuing tearing, oil and ageing. Made in Great Britain.Diameter: 200mm.Metal Centre threaded internally: M14 x 2.
The IRWIN® Mixed Screwdriving Set is supplied in a robust, compact storage case, designed to hold up against the rigours of daily use. Fitted with an easy-to-use flip-up latch design that keeps cases securely closed when not in use and locks the cases together when stacked. The connectable cases can be customised to create a single storage unit that is both secure and portable. Contains: 5 x 25mm Phillips Bits: PH1, PH2(x2) and PH3(x2).9 x 25mm Pozidriv Bits: PZ1, PZ2(x5) and PZ3x(3).7 x 25mm TORX Bits: TX10, TX15, TX20(x2), TX25(x2) and TX30.4 x 50mm Phillips Bits: PH1, PH2(x2) and PH3.6 x 50mm Pozidriv Bits: PZ1, PZ2(x4) and PZ3.6 x 50mm TORX Bits: TX15, TX20, TX25(x2) and TX30(x2).2 x Nut Setters: 8 and 10mm.1 x Magnetic Bit Holder.
MEXCO VBX90 Grade Universal Diamond Blade. The VBX90 uses a process of vacuum brazing to attach large pieces of diamond grit to the cutting edge of a steel centre; this manufacturing process allows the diamond grit to be held constantly in contact with the material being cut producing very fast and effective stock removal. Suitable for dry and wet cutting.
1 x MEXCO VBX90 Grade Universal Diamond Blade 350 x 20mm
MEXCO VBX90 Grade Universal Diamond Blade. The VBX90 uses a process of vacuum brazing to attach large pieces of diamond grit to the cutting edge of a steel centre; this manufacturing process allows the diamond grit to be held constantly in contact with the material being cut producing very fast and effective stock removal. Suitable for dry and wet cutting.
1 x MEXCO VBX90 Grade Universal Diamond Blade 230 x 22mm
MEXCO VBX90 Grade Universal Diamond Blade. The VBX90 uses a process of vacuum brazing to attach large pieces of diamond grit to the cutting edge of a steel centre; this manufacturing process allows the diamond grit to be held constantly in contact with the material being cut producing very fast and effective stock removal. Suitable for dry and wet cutting.
1 x MEXCO VBX90 Grade Universal Diamond Blade 350 x 25.4mm
MEXCO UHXCEL+ Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for fast, clean cutting with reduced chipping. Suitable for ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials.With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors. Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL+ Ultra Hard Plus Diamond Blade 230 x 25.4mm
This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification: D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
This Trend 4/66 x 1/2 TCT Two Flute Cutter has the following specifications: D: 22mm. C: 25mm. OL: 66mm. Shank Diameter: 1/2in. The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. 22 x 25mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 63 mmD = 15.9 mm - 5/8in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 9.5 mm 3/8in
Senco DuraSpin® Collated Decking screws with a green Weatherex coating. Square No.2 drive, coarse thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Decking Screws with Weatherex coating. Size: 4.2 x 65mm.
Senco DuraSpin® Collated screws for Drywall to Heavy Steel applications. Phillips No.2 drive, clear zinc finish, fine-thread. 50 screws per strip. CE-marked (EN14592). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Heavy Steel. Size: 3.5 x 25mm.
Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 21° Collation AngleProfile RING Finish G50 Description RH STICK 3.10-90 RING GAL-HD50 2M Qty per box 2000 Will Fit F21PL-E, N79RH-2
The Wiha Nut Driver & Bit Set, 40 Piece, can be used to simply carry out fastenings in a single step. All of the nut driver inserts are made from high quality chrome vanadium steel with a corrosion-resistant, easy to clean surface. Contains the following: 13 x 1/4in Hex Nut Driver Inserts: 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10, 11, 12, 13 & 14mm. 1 x 1/4in Switchable Ratchet Wrench 128mm. 2 x 1/4in Extensions: 75 & 150mm. 1 x 1/4in Universal Joint with Ball Internal Square/Square Head. 3 x 25mm Standard Slotted Bits: 4.5, 5.5 & 6.5mm. 2 x 25mm Standard Phillips Bits: PH1 & PH2. 3 x 25mm Standard Pozidriv Bits: PZ1, PZ2 & PZ3. 7 x 25mm Standard TORX Bits: T10, T15, T20, T25, T27, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x Magnetic CentroFix Force Bit Holder 60mm. 1 x Magnetic SoftFinishScrewdriver with Bit Holder 112mm. 1 x 1/4in Tool Shaft with Ball Square/Internal Hexagon. 1 x Multifunctional Bag with Belt Clip keeps all tools securely arranged. Easily hooks on to work trousers thanks to the high quality clip holder.
