The DEWALT DCE6820 XR Water Tank provides water based dust suppression when cutting concrete or masonry with cutting or drilling equipment. For use with cutoff saws as well as core drills with water delivery systems. It also functions as a portable water source, suitable for a variety of applications. The easy to use control panel allows you to turn on the water supply with the flip of a switch. No manual pumping. Fitted with a durable, ink-resistant, braided hose and adjustable nozzle. This spray nozzle and quick connect adaptor provides cleaning capabilities and quick connection to core drills, cut off saws and other tools. A translucent tank allows you to easily view liquid level and avoid over-filling. Easy to fill and clean thanks to its wide mouth opening. The large cap helps prevent spills and tether keeps cap attached to the tank. The water tank has two handles so users can comfortably move the water tank around the jobsite manually. It can also be stacked onto a TSTAK case for easier transportation. Compatible with the Wireless Tool Control system.This allows for automatic water delivery as soon as you start drilling or cutting. Shortly after you stop, the water delivery also stops automatically. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Tank Capacity: 15 litres. Hose Length: 3m.
The DEWALT DT20733 Fastcut Wood Multi-tool Blade is suitable for a wide range of cutting applications, including wood, plasterboard and PVC. UNIVERSAL FITMENT™ for adaptor-free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Specifications: Width: 43mm.Length: 30mm.
The DEWALT DE7260 Mitre Saw Folding Rolling Stand has an easily adjustable mounting system that simplifies tool attachment and ensures universal compatibility. It has 2 height settings and is fitted with wide supports that extend up to 2.4m, with a capacity up to 135kg, providing excellent material support. The stand is fitted with pneumatic assists for easy set up and collaspe, XL rubber wheels for improved jobsite mobility and no punctures and a kickstand for vertical storage. This compact vertical storage option provides improved mobility and ease of transport. Specification: Max. Load: 135kgMax. Extension: 2.4m
Cuts all metals including non ferrous, pipe conduit, stainless and sheet metal. Suitable for use with materials 1.5 to 10mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade. These blades have the following specification:Blade Type: Metal Cutting, 818R, 200mm x 18tpi. The Irwin IRW10506426 Sabre saw 818R metal cutting blades (200mm) comes in a pack of 2 with 18TPI.
The Irwin General Purpose Table & Mitre Saw Blade with construction grade tungsten carbide tips that retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Table & Mitre Saw Blade has the following specifications: Blade Diameter: 250mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 3.0mm.Tooth Config: ATB.Machine: Table & Mitre.
Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. With a universal shank and 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Straight cuts in hard and soft wood, plastics, plywood, laminated particle board 4-30 mm (3/16 Inch - 1 1/4 Inch). Length: 100mm.Pitch: 10 Ordinary Cut. Supplied in a pack of 5.
Irwin Sabre Saw Blades 810R Metal & Wood offer superior construction and design making them faster cutting and longer lasting. The Irwin reciprocating range includes labelling on the blade, which makes it easy to identify the right blade for the right application. These Metal and Wood Cutting blades are suitable for cutting composition materials such as plastic, wood, carbon steel and stainless steel. Suitable for materials which are 3.2mm (1/8in) and thicker. Length: 200mm.Teeth: 10.Irwin Sabre Saw Blades 810R 200mm Metal & Wood Cutting Pack of 25. Length: 200mm.TPI: 10.
Flexovit 1/3 perforated sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 8 Parallel Hole Configuration, 93 x 230mm.
The Flexipad Medium Density Pads are suitable for polishing and grinding. The backplate is made from impact resistant synthetic nylon which is bonded to microcellular polyurethane. Excellent resistance to initial and continuing tearing, oil and ageing. Made in Great BritainExtremely durable yet flexible backing pad for use with sander polishers. Thread: M14 x 2 internal.Type: Self Stick.Size: 150mm.
Flexovit 1/2 sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, they are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 115 x 280mm.Packed in 10s
The Faithfull Quick-Change Security Bit Set is a useful addition to any toolkit and contains 24 of the most popular 1/4in hex drive screwdriver bit types, including 18 of the most common security fixings used in industry on appliances and toys. Manufactured from hard-wearing S2 steel, these bits provide a long working life. Used in conjunction with the quick-release magnetic bit holder, they can be swiftly changed without the need to open the drill chuck. The set is supplied in a sturdy impact resistant plastic storage case. Contains: 3 x 25mm Pozidriv Bits: PZ1, PZ2 & PZ33 x 25mm Phillips Bits: PH1, PH2 & PH35 x 25mm Spanner Bits: 4, 6, 8, 10 & 12mm7 x 25mm Star Security Bits: T10S, T15S, T20S, T25S, T27S, T30S & T40S6 x 25mm Hex Security Bits: 2, 2.5, 3, 4, 5 & 61 x Quick-Release Magnetic 1/4in Hex Drive
The Irwin Professional Aluminium Circular Saw Blade has expansion slots that help keep the blade flat. Triple Chip Ground Tooth (TCG) provide an excellent cut finish. Specially designed for cutting all types of non-ferrous metals such as aluminium, copper, lead and plastics.This IRWIN Professional Aluminium Circular Saw Blade has the following specifications: Blade Diameter: 216mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 2.5mm.Tooth Config: TCG.
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc 230 x 3.2 x 22.23mm
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 75 28 Collation AngleSKU S280R75G8 Profile RING Finish G8 Description STICK NAIL 2.80-75 RING GAL8 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S
Senco DuraSpin Collated Screws for Drywall to Heavy Steel applications. Phillips No.2 drive, clear zinc finish, fine thread. 50 screws per strip. CE-marked (EN 14592). Suitable for both cordless and mains-operated machines.Pack of 1,000 Senco DuraSpin Collated Screws Drywall to Heavy Steel 3.5 x 45mm
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 190mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 10 with the following dimensions: T25 x 25mm.
The BlueSpot Tools Turbo Cutting Disc is specially designed to provide fast and accurate dry and wet cutting. Ideal for cutting through general masonry, concrete, engineering bricks porcelain, ceramics, granite, and marble. High resistance to breakage and long-lasting durability. The turbo design of the blade offers long cutting life and stable cutting performance due to its ability to cool the disc more efficiently. MPA Tested/EN13236. Specifications: Diameter: 115mm (4 1/2in).Bore: 22mm.Segment Depth: 10mm.Maximum safe speed: 13,000 RPM (80 m/s).
This Faithfull Power Plus Enclosed Cable Reel features 2 shuttered sockets with a maximum load of 16A (1,760W) fully unwound or 6A (660W) wound. The robust semi-enclosed easy reel accurately guides the cable onto and off the drum and ensures that the cable is protected while in storage or transit. A thermal overload protection system prevents overheating from damaging the cable. The cable reel also features a BS approved plug and a carry handle with a rotating fast rewind knob. A flat base keeps the reel upright for easy storage. Manufactured in accordance to BS 61242 and suitable for site and trade use. NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.1 x Faithfull Power Plus Enclosed Cable Reel 25m 16 amp 1.5mm Cable 110V
The Dormer P813 Solid Carbide Rotary Burr Bright with pointed tree ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Pointed Tree has the following specification: Diameter: 6mm.Shank Diamter: 6mm.Working Length: 18mm.Overall Length: 50mm.
The Dormer P805 Solid Carbide Rotary Bright Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball Nosed Cylinder has the following specification: Diameter: 9.6mm.Shank Diameter: 6mm.Working Length: 19mm.Overall Length: 64mm.
Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.Trend C220 x 1/4 TCT Intumescent Cutter to suit 4mm thick strip of 15mm width. Specification: Diameter: 24mmCutting Depth: 15mmBearing: 16mmShank: 1/4in
The DEWALT reciprocating bi-metal construction blades combine HCS and HSS for increased flexibility, durability and have been designed for use with cordless machines. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil and these blades are ideal for fast cutting of metals, wood and plastics.The DEWALT DEWDT2346QZ reciprocating blades are ideal for use with ferrous and non-ferrous metals up to 3mm thick.
