The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M14.Wire Gauge.0.35.Wire Type. Steel.Max R.P.M. 12,500.
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of sizes and wire styles are available.Diameter. 150mm.Wire Height. 50mm.Bore. M14.Wire Gauge.0.35.Wire Type. Steel.Max. R.P.M. 4,000.
This Faithfull Power Plus Enclosed Cable Reel features 2 shuttered sockets with a maximum load of 16A (1,760W) fully unwound or 6A (660W) wound. The robust semi-enclosed easy reel accurately guides the cable onto and off the drum and ensures that the cable is protected while in storage or transit. A thermal overload protection system prevents overheating from damaging the cable. The cable reel also features a BS approved plug and a carry handle with a rotating fast rewind knob. A flat base keeps the reel upright for easy storage. Manufactured in accordance to BS 61242 and suitable for site and trade use. NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.1 x Faithfull Power Plus Enclosed Cable Reel 25m 16 amp 1.5mm Cable 110V
The Irwin 10 piece set of T-shank jigsaw blades for AEG, Bosch, DEWALT and Hitachi Jigsaws for metal and wood cutting are manufactured from high quality materials. Contain the following pieces: 2 x 10504221 (T111C) Wood cutting 100mm 8 tpi.2 x 10504218 (T144D) Wood cutting 100mm 6 tpi (fast cut).2 x 10504219 (T101B) Wood cutting 100mm 10 tpi.1 x 10504222 (T101D) Wood cutting 100mm 6 tpi (clean cut).2 x 10504220 (T118A) Metal cutting 92mm Progressive 17 - 23 tpi.1 x 10504225 (T118B) Metal cutting 92mm Progressive 11 - 13 tpi.
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special steel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M10.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.
Flex Power Tools DT-XF 3 PXE Random Orbital Adaptor for spot disc grinding and very fine polishing work. Can only be used with the PXE 80 10.8-EC Spot Polisher. Combined with: 30mm Velcro pad for spot discs to be adhered, the Velcro pad for polishing and spot disc for grinding, as well as the 75mm Velcro pad for polishing and grinding. Specification: Oscillation Diameter: 3mm
This Lessmann Threaded Tube Brush has the following specification: Wire: Stainless SteelThread: 1/2in ExternalDiameter: 30mmFilling Length: 100mmOverall Length: 160mm
The Faithfull crimped brass wire circular brush designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and are designed to operate with power tools up to a maximum of 4,500/min. Type: Circular Diameter: 75 mm Shaft: 6 mm (1/4in) Wire: 0.30 mm crimped brass wire Conforms to ISO 9001 and DIN EN1083-1 and 2.
Zenith Tripomax Polishing Bar is used for first stage polishing of brass, copper, aluminium or plastics. Use with stitched cotton mops. Colour: Brown. Supplied in a pack of 1.Individual Size (L x H x W): 210 x 45 x 55mm.
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 10 with the following dimensions: T27 x 25mm.
Irwin Sabre Saw Blades 610R 150mm Metal & Wood Cutting blades offer superior construction and design making them faster cutting and longer lasting. Cuts composition materials such as plastic, pipe, carbon steel and stainless steelSuitable for use with materials 3.2mm (1/8 in) and thicker. Length: 150mm.Teeth: 10tpi.Irwin 610R Sabre Saw Blade Metal & Wood Cutting. Pack of 5.
These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.T.C.T.1/4in Shank.A = 45° C1 = 12 mmC2 = 16 mmD = 31.8 mmB = 9.5 mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.T.C.T. 1/4in Shank.C = 19 mmD = 16 mm 5/8in
These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 5000 DEWALT 16 Gauge Galvanised Finish Nails 25mm
DEWALT DT20560 Impact Rated PVC Pipe Cutter comes with a 1/4in Hex shank so it fits easily to your Impact Driver. The 360° rotating head offers complete flexibility, regardless of which angle your material is. This attachment uses the power and torque from the impact wrench to easily cut through PVC, PEX and Plastic Conduit pipes. With 100x less effort and 6x faster than using a hand pipe cutting tool. Specification: Max. Cutting Capacity: 50mm.
IRWIN Powerfile Sanding Belts are made from high quality materials with a heat-resistant and dust-resistant synthetic resin bond for powerful sanding. The Aluminium Oxide abrasive grain provides excellent stock removal. For use on wood, metal and other materials. Compatible with the following: BLACK+DECKER Powerfile (BD280/290/282E/292E, KA290 and KA292E).This 10 Piece IRWIN Powerfile Sanding Belt Set contains the following: 3 x 40G Belts.4 x 60G Belts.3 x 120G Belts.
The Bosch GFA 18-M Professional FlexiClick Metal Chuck Attachment. Robust full metal design. A 'One-Click' interface ensures a tight fix to the machine at a glance. Compatible with GSR 18 V-FC2.
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.
Pack of 3 Faithfull Zirconia Abrasive Jumbo Flap Discs 125 x 22mm 80 GritThe Faithfull 80 Grit Zirconia Abrasive Jumbo Flap Disc is suitable for final grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.For use with a 125mm angle grinder.Max. Speed: 80m/s 12,200 RPM.
MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 182mm
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.
This Pack of 3 Faithfull Zirconia Abrasive Jumbo Flap Discs contains the following:1 x Zirconia Abrasive Jumbo Flap Disc 125 x 22mm 40 Grit1 x Zirconia Abrasive Jumbo Flap Disc 125 x 22mm 80 Grit1 x Zirconia Abrasive Jumbo Flap Disc 125 x 22mm 120 Grit40 grit is suitable for for rough grinding.80 grit is suitable for final grinding.120 grit is suitable for smooth grinding.
The CorePlus Concrete & Asphalt Diamond Blade has been engineered to cut material with abrasive properties, resulting in exceptional blade life. A precision-engineered, hardened, high-grade 65Mn manganese steel tensioned core ensures the blade runs true.Double laser welding technology reduces the risk of damaged segments, combined with the maximum concentration of ultra-grade diamond that has been meshed within the bond. It also features a state-of-the-art, metallurgically engineered, high-performance and long-life bond formulation which ensures maximum durability and lifetime.Manufactured to EN 13236 quality standard. oSa® certified to the highest level of quality and tested safety.Suitable for cutting; Asphalt, Asphalt Over Concrete, Blocks - Breeze, Blocks - Toplite, Concrete - Pipes, Concrete - Kerbs, Concrete - Green, Gritstone, Sandstone - Medium and Mortar.
This CorePlus Concrete & Asphalt Diamond Blade has the following specifications:Blade Diameter: 350mm.Bore: 20mm.Segment Size: 10mm.Segment Width: 3.2mm.Max. RPM: 4,360/min.
The Bosch GDE Max Professional Dust Extraction is perfect when chiseling with SDS max hammers. It comes with a handy attachment for SDS max bushing tools. Working with the GDE max Professional is highly convenient as it gives you the freedom to work in various working positions and allows chisel exchanges without dismounting the dust extraction. Compatible with nearly all SDS max demolition and rotary hammers.
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grade steel core, are manufactured to EN 13236 quality standards.Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc.Specifications:Blade Diameter: 350mm.Bore: 20mm.Segment Size: 12mm.Segment Width: 3.4mm.Max. RPM: 4,400/min.
MEXCO Professional Crown Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss. Suitable for wet cutting.
1 x MEXCO Wet Core Drill (Crown Segment) 18mm
MEXCO GPX10-15 Concrete Diamond Blades have been specifically designed for cutting a wide range of general purpose building materials. The GPX10-15 offers a cost effective solution for the user who requires a diamond blade which can cope with the cutting of the most widely used non-abrasive building materials.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 15mm
1 x MEXCO GPX10-15 Concrete Diamond Blade 230 x 22mm
MEXCO GPX10-8 Concrete Diamond Blades have been specifically designed for cutting a wide range of general purpose building materials. The GPX10-8 offers a cost effective solution for the user who requires a diamond blade which can cope with the cutting of the most widely used non-abrasive building materials.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 8mm
1 x MEXCO GPX10-8 Concrete Diamond Blade 300 x 20mm
The MEXCO Fibre Cement Board PCD Blade has Polycrystalline diamond (PCD) teeth which cut through cement based fibre boards, composite materials and many other difficult applications with outstanding performance results compared to a TCT blade or diamond continuous blade. Suitable for dry cutting.
1 x MEXCO Fibre Cement Board PCD Blade 185 x 30mm x 4T
The LENOX MetalWolf Wave Edge Reciprocating Saw Blades have been designed for repetitive, everyday use with metals, these saw blades deliver up to 50% longer life (vs. prior LENOX generation) thanks to WAVE EDGE technology which is designed to improve longevity. The high-speed edge helps you get the most out of your reciprocating saw while the steel backing assists in reducing breakage when cutting metal. Patented T2 technology optimises chip removal for an efficient cut in a wide range of materials.
Pack of 5 LENOX MetalWolf Wave Edge Reciprocating Saw Blades 102 x 19 x 0.9mm 14 TPI.Application: Thick Metal.
The LENOX LumberWolf Reciprocating Saw Blades made with POWER BLAST TECHNOLOGY. This strengthens the blade, increasing durability and reduces breaks. Patented T2 Technology reduces cutting forces on each tooth and optimises chip removal to allow efficient cutting in the widest range of materials. The Tuff Tooth design is reinforced to cut stronger and last longer.Each blade has a unique configuration including an aggressive tang angle and tapered blade shape to allow for cutting in tight areas. Ideal for cutting wood: clean or nail embedded.
Pack of 25 LENOX LumberWolf Reciprocating Saw Blades 152 x 19 x 1.3mm 6 TPI.
This Faithfull Backing Pad is made from rigid polypropylene for use with abrasive sanding discs. It offers low vibration running and is resistant to high temperatures. The M14 x 2 threaded female flange will fit most brands of angle grinder. Specification: Max. Speed: 10,000/rpm1 x Faithfull Backing Pad 125mm M14 x 2.
