MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 82mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
The MEXCO Slotted Dry Core Drill XCEL Grade 9 Piece Kit comes in a handy case. Contains:3 x Slotted Dry Core Drills: 38, 52, 117mm2 x Hex Adaptors: 80, 250mm2 x SDS Adaptors: 80, 250mm1 x A-Taper Pilot Drill 10 x 175mm1 x Drift Key
Trend UNIBASE/180 Universal Plunge Router Sub-Base with 23 Hole Patterns to suit most 1/2in plunge routers, including 18V cordless models. The Trend Universal Plunge Router Sub-Base unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes.Made from reinforced nylon for a low-friction, precise routing surface.The Precision Centring System ensures perfect concentricity between cutter and guide bush for pinpoint accuracy with routing jigs. Reinforced threaded brass inserts provide secure mounting points for guide bushes. The Quick Pattern Finder makes locating the hole pattern for your router quick and easy. A screw pack helps you to find the right screws easily and keeps them neat when not in use. 180mm
The Starrett KA19 Hole Enlargement Arbor allows diameters to be enlarged by attaching a saw of the same size to that of the existing hole. This saw then acts as the pilot for the larger diameter saw attached to the arbor. Specifications: Compatible Holesaws: FCH, DCH, TCT Multi Purpose, CT Diamond.Compatible Threads: 1/2in x 20 5/8in x 18.Min. Hole Enlargement: 4.7mm (3/16in).
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 11.5mm.
The Makita 194385-5 Plunge Saw Clamp Set has been designed for use with the Makita SP6000 Plunge Saw. These clamps are mainly used when using the saw in conjunction with a guide rail. They hold the guide rail/material securely in place.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 11.0 mm 7/16in. Cutting Length: 25 mm. Shank Diameter: 1/4in.
For use with GRIP® fastening backed sanding discs, sponge backed with 6 mm spindle. Ideal for curved surfaces. Made in Great BritainType. 75-SP20-VEL.Size. 75mm.
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90 D = 12.7 mmC = 25 mm
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Finish.Blade Diameter: 254mm.Bore: 30mm.Teeth: 60.Bush: 25 & 16mm.Rake: POS.
The MEXCO Solid Barrel Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Solid Barrel Dry Core Drill XCEL Grade 22mm
The MEXCO Asphalt XCEL Grade Diamond Blade is a superior diamond cutting blade. Developed to meet the needs of contractors and builders who cut on a regular basis and demand a superior cut every time. Offers fast stock removal and excellent performance when used for cutting the most abrasive of applications such as Asphalt, green concrete and cement screed.
1 x MEXCO Asphalt XCEL Grade Diamond Blade 350 x 25.4mm
IRWIN Powerfile Sanding Belts are made from high quality materials with a heat-resistant and dust-resistant synthetic resin bond for powerful sanding. The Aluminium Oxide abrasive grain provides excellent stock removal. For use on wood, metal and other materials. Compatible with the following: BLACK+DECKER Powerfile (BD280/290/282E/292E, KA290 and KA292E).Pack of 3 IRWIN Powerfile Sanding Belts 13 x 455mm 60G.
IRWIN Powerfile Sanding Belts are made from high quality materials with a heat-resistant and dust-resistant synthetic resin bond for powerful sanding. The Aluminium Oxide abrasive grain provides excellent stock removal. For use on wood, metal and other materials. Compatible with the following: BLACK+DECKER Powerfile (BD280/290/282E/292E, KA290 and KA292E).Pack of 3 IRWIN Powerfile Sanding Belts 13 x 455mm 120G.
IRWIN Mouse Sanding Sheets with Velcro attachment, reduced space between the sanding sheet and the machine allows for higher removal rate. Perforation allows for more efficient dust extraction. Compatible with the following: BLACK+DECKER Mouse KA161, KA168, KA1000, KA2000, BEW230, Stanley FatMax FMCW210 and BOSCH primo.10 Piece IRWIN Mouse Sanding Sheet Set, contains the following: 3 x K80, 2 x K120, 2 x K180 and 3 x K240.
The Faithfull Diamond Grit Jigsaw Blade is designed for tough cutting situations. The tough braze bonded diamond edge and high-grade steel blade blank give an extremely long lifespan. The blade is extremely robust with minimal diamond loss or dulling. It also features patented Reduced Kerf Technology (RKT) for fast cutting. It will easily cut through Cast Iron, Plasterboard, Cement Board, Fibreglass, Carbon Fibre, Composites, Ceramic, Porcelain, Granite and Stucco. Cut surfaces require little secondary finishing. Specification: Blade Thickness: 0.8mmBlade Length: 76mm
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 184mm.Bore: 16mm.Teeth: 24.Kerf Thickness: 2.5mm.Tooth Config: ATB.
Irwin Speed Hammer flat chisels for use with SDS Max machines. Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit. Suitable for use on concrete and masonry and are supplied in a grey sandblasted professional finish.The Irwin IRW10502188 Speedhammer Max flat chisel has the following dimensions:Size: 25 x 400mm
Irwin Sabre Saw Blades 800RG Carbide Grit 200mm, can cut through cast iron, fibreglass, ceramic tile, clay, pipe, stone, brick, plaster and marble.Length: 200mm.Tooth pitch: Carbide grit. Comes in a pack of 2.
This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.
These Faithfull brushes have nylon bristles for use on wood, metal and stone. Many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2. The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.The Faithfull FAIWBN75C Nylon Wheels have a flat circular shape with the following dimensions:Size: 75mm diameter x 6mm shaft x 1.5mm bristle.
The MEXCO Dual Purpose Abrasive Diamond Blade comes with a dual bond segment design. Enables fast cutting and long life in a wider range of common applications from facing bricks to asphalt. Manufactured using the latest techniques and ingredients including undercutting protection, dual bond diamond segment configuration and laser welded segment attachment, this blade is the best in its class. Specially designed for builders and construction workers who cut on a regular basis.
1 x MEXCO XCEL Grade Dual Purpose Diamond Blade 300 x 20mm
The MEXCO X90 Grade Ceramic Materials Diamond Blade has been developed with a continuous rim segment to cut ceramic tiles quickly and cleanly. The performance of this product can be attributed to its high diamond concentration allowing a large amount of diamond grit to be exposed at all times producing a fast accurate clean cut.When taking on a job such as tiling, whether on the walls or floors, it’s the finish which really matters. A general purpose blade will chip, not cut neatly or accurately and will not last very long. Mexco’s diamond blade for ceramic cutting has been designed to give an excellent cut, have a low wear rate, but still be great value for money.
1 x MEXCO X90 Grade Ceramic Materials Diamond Blade 115 x 22mm
The MEXCO Abrasive Materials X10 Grade Diamond Blade offers the user extended product lifetime when cutting abrasive building materials like medium density concrete blocks and lignacite products due to its harder segment bond. Great value diamond blade offering superb cutting performance; specifically designed and manufactured for the purpose of cutting abrasive materials. The harder segment bond offers the user an extended cutting life over the General Purpose Diamond Blade.Suitable for wet and dry cutting.
1 x MEXCO Abrasive Materials X10 Grade Diamond Blade 230 x 22mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 72 x 450mm
The Starrett HSS Split Point Drill Bits have superior body strength thanks to a specialised heat treatment, they can withstand the most demanding of applications. The high-performance ecision ground carbide tips deliver consistent performance. Whilst the flute geometry provides fast material penetration and maximum debris removal.They also feature a unique chip removal/breakage accelerator.Designed to meet the requirements of professional users. Manufactured to DIN 338 Standards.
This Starrett HSS Split Point Drill Bit has the following specifications:Tip Diameter: 8.0mmWorking Length: 75mmOverall Length: 117mm
MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bits offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to the special wax filled core which melts, lubricates and cools when drilling. For use on high speed corded drills. Suitable for dry cutting.
1 x MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bit 8mm
MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bits offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to the special wax filled core which melts, lubricates and cools when drilling. For use on high speed corded drills. Suitable for dry cutting.
1 x MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bit 10mm
IRWIN Impact Pro Performance Pozidriv Screwdriver Bits have been engineered for maximum durability and turning force when used in extreme applications. The full-fit head eliminates wobble and screw head roundings. With a contoured area, so the bit tip flexes with the torque of the impact driver. Flex optimised to transfer maximum torque through the screw and maximise life.Pack of 2 IRWIN Impact Pro Performance Screwdriver Bits PZ1 25mm
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Cross Cut.Blade Diameter: 235mm.Bore: 35mm.Teeth: 40.Bush: 30, 25 & 16mm.Rake: POS.
The BlueSpot Tools 3 Piece SDS-plus Chisel Set has been designed for SDS-plus drills with a roto stop function. They have been heat treated for increased strength and durability. Ideal for chasing out, cleaning bricks or breaking. Contents:2 x Flat Chisels : 20mm & 40mm.1 x Point Chisel.
The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.The HSS Drill Bits in this seven piece set are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Contents. 1.6 mm (1/16in) Drill.2.4 mm (3/32in) Drill.3.2 mm (1/8in) Drill.4.0 mm (5/32in) Drill.4.8 mm (3/16in) Drill.5.6 mm (7/32in) Drill.6.3 mm (1/4in) Drill.With collets.
