The DEWALT DWV9390 Dust Bag is suitable for use with DCP580 cordless planer. It has a twist-lock connection to the chip deflector for quick emptying and is AirLock compatible.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 180 x 22 x 36g.Coarse
IRWIN 8 Piece Oscillating Blade Set. Suitable for cutting a range of common materials; wood, plasterboard, PVC and nail embedded wood. Ideal for use on renovation jobs. Contains: 3 x Oscillating Blades 30 x 43mm x 18 TPI.2 x Oscillating Blades 30 x 66mm x 15 TPI.3 x Oscillating Blades 30 x 43mm x 20 TPI.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 19.0 mm 3/4in. Cutting Length: 25 mm. Shank Diameter: 1/4in.
The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in the sets to enable drills to be removed with two spanners.7 piece drill set.1.5, 2, 2.5, 3, 4, 5 and 6mm.Supplied in a storage tube.
The Zenith Satin Mop is suitable for satin finishing work. It gives a satin or brushed finish to all metals.The ZENSFM62W Satin Mop has the following specifications:Grade: Medium.Size: 6 x 2 Lap.
The Zenith Satin Mop is suitable for satin finishing work. It gives a satin or brushed finish to all metals.The ZENSFC62W Satin Mop has the following specifications:Grade: Coarse.Size: 6 x 2 Lap.
Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.An industrial profiling tool for longer runs of work when a clean finish is needed. Tooling : T.C.T.1/4in Shank.. A Angle = 90° C = 25.4 mmD = 12.7 mm
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 1.6 mmD = 15.9 mmC = 7.9 mmBearings = 9.5 and 12.7 mm
The DEWALT HCS Progressor Tooth Jigsaw Blades are ideal for fast cutting of different material thicknesses with a single blade. The blades are made from high carbon steel for increased durability with a T shank fitting for all T-shank Jigsaws. The PROGRESSOR Blade can be used for woods, chipboard, plywood and fibre boards up to 65mm thick.1 x Pack of 5 DEWALT DT2059 HCS Progressor Tooth Jigsaw Blades T345XF
The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. Used on-site and in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick and simple to set-up as the hinge is used as the pattern. Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges. Use with a light duty router with 1/4inch collet. Long reach router cutter required, 12mm diameter with 70mm overall length. Angled position slots to prevent creep. Patent No. GB2285410. Includes: 4 x Apertures, 2 x Bradawls, 1 x 16mm Guide Bush, 1 x T-Handle Hex Key, 1 x 4mm Spacing Gauge and 1 x Plastic Storage Tube. Specification Hinge Sizes Possible: Length Min/Max: 67-127mm (2.5/8-5in).Width Min/Max: 9.5-35mm (3/8-1.3/8in). Door Sizes Possible: Height Min/Max: 1955-2032mm (6ft 5in - 6ft 10in).Thickness Min/Max: 16-44mm.
Bostitch FAC Series Flat Angle Coil Pattern Ring Coil Nails are designed for high volume operation. The coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them used in the pallet and crate, fencing, garden furniture and the construction industries. To Suit: N71C-1-E, N75C-2-E, N80CB-1ML, N89C-1P-E, N89C-2K-E All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation Angle Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Finish: Bright.Size: 3.1 x 65mm.Box quantity: 5,400.
Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. With a universal shank and 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Fast, clean cuts in hard and soft wood, particle board 6-60 mm (1/4-2 3/8in). Length: 100mm.Pitch 6 Fast Cut. Supplied in a pack of 5.
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 2 with the following dimensions: T25 x 25mm.
Irwin Sabre Saw Blades 624R 150mm 24tpi Metal Cutting offer superior construction and design making them faster cutting and longer lasting.Cuts all metals including non ferrous, pipe conduit, stainless and sheet metal.Suitable for use with materials 1.5 to 10mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade. Size: 150mm.Teeth: 24 tpi.Irwin Sabre Saw Blades 624R 150mm 24tpi Metal Cutting Pack of 2. Size: 150mm.Teeth: 24 tpi.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 210mm.Bore: 30mm.Teeth: 20.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 125mm.Bore: 20mm.Teeth: 16.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 160mm.Bore: 20mm.Teeth: 18.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 160mm.Bore: 20mm.Teeth: 30.Kerf Thickness: 2.5mm.Tooth Config: ATB.
Flex Power Tools DT-P Rotary Adaptor for rapid spot repairs. Can only be used with the PXE 80 10.8-EC Spot Polisher. Use with the 30mm diameter Velcro pad for spot polishing and grinding.
These Paslode IM360 Nails have the following specification: Finish: A2 Stainless SteelSize: 2.8 x 63mmShank: RingPack: Box of 1,100Number of Fuel Cells: 1
