Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504218 (T144D) Wood Jigsaw Blades provide fast, clean cuts in hard and soft wood, particle board 6-60mm.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504222 (T101D) Wood Jigsaw Blades provide fast, straight cuts in hard and soft wood, plastics, particleboard 6-60mm.
These DEWALT Bi-Metal Reciprocating Blades are suitable for cutting ferrous and non-ferrous metals, sheet steel, pipes and profiles. Specification: Length: 228mmPitch: 1.8mmTPI: 14Cut Type: FastPack Quantity: 5 DEWALT Bi-Metal Reciprocating Blades for cutting metal have an adjusted tooth setting for maximum durability and M2 HSS cutting edges for sharpness. Bi-metal construction, a combination of HCS and HSS for greater flexibility. A 25mm (1in) high blade body provides increased strength and durability. The universal shank fits all major brands including DeWalt, Bosch, Hitachi, Flex, Makita, Metabo and Skil.
The SDS Max Steel tile chisel is ideal for heavy-duty chiselling, channelling and demolition tasks in concrete, stone (medium hardness), floor and wall tiles, general masonry and mortar. This tile chisel features specially toughened steel and micro-processor controlled heat treatment which ensures consistent tough bits with long life. The DEWALT DEWDT6834QZ SDS Max steel tile chisel has the following dimensions:Width: 80mmLength: 300mm
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. They can be used for fast cutting in wood, wood with nails and tough plastics. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2359QZ reciprocating blades are ideal to be used for fast cuts in wood with nails and tough plastic.
The DEWALT FlexVolt XR Table Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with the DEWALT 54 Volt FlexVolt Table Saw to deliver maximum performance.This DEWALT FlexVolt XR Table Saw Blade has the following specification: Application: Ripping.Finish: General Purpose.Blade Diameter: 210mm.Bore Size: 30mm.Tooth Count: 36.Kerf Thickness: 1.80mm.Plate Thickness: 1.24mm.Grind: ATB+R.Rake Angle: 20°.
The DEWALT DT70512T Impact Torsion Screwdriver Bit Set contains a selection of high performance impact torsion bits that have been designed for use with impact drivers. Preferred by professional users for maximum hold, tight access and no run out. The CNC precisely machined bits have a torsion zone that absorbs peaks in torque allowing optimum bit flex for maximum life in tough Impact or High Torque industrial applications. The bit holder features a magnetic screw lock system that is 10x stronger than the average holder, with an aluminium screw lock sleeve for use with torsion bits 50mm and above. Plus an 85mm bit tip holder with removable sleeve for use with 25mm bits and a compact rapid load for use with bits 25mm and above. Both provide excellent hold, reach, stability and accessibility in all screwdriving applications, even the most awkward to reach. Supplied in a compact bit case to safely store screwdriver bits and long and short magnetic screw guides. Contains: 12 x 25mm Impact Screwdriver Bits: PH1, PH2, PH3, PZ1, PZ2(3), PZ3, SL6, T20, T25 & T30 1 x Compact Magnetic Drive Guide 1 x Long Magnetic Drive Guide
The DEWALT DT70703 Screwdriving Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 1 x 25mm Slotted Bit: 6mm8 x 25mm Phillips Bits: PH1, PH2(x5) & PH3(x2)22 x 25mm Pozi Bits: PZ1(x3), PZ2(x14) & PZ3(x5)5 x 25mm TORX Bits: T20, T25(x2) & T30(x2)6 x 25mm TORX Security Bits: T10, T15, T20, T25, T30 & T40 1 x 50mm Phillips Bit: PH22 x 50mm Pozi Bits: PZ2 & PZ31 x 50mm TORX Bit: T25 1 x Bit Holder Plus a pair of Tinted Safety Glasses.
DEWALT Mesh Sanding Sheets last at least 4 times longer than traditional DEWALT sandpaper sheets. Fibres are drawn away from the surface of the sheet into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. The sanding sheets enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding sheets. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding sheets have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3022 1/4 Mesh Sanding Sheets have the following specifications:Size: 115 x 115mm.Grit: 80.Pack quantity: 5.
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size: 60 x 40mm.Grit: Fine.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 100 x 16 x 60g. Medium.
Three heavy-duty 14 meter 110V trailing leads available in 1.5mm or 2.5mm cable and 16 or 32 amp versions. All leads are fitted with an industrial plug and socket to BSEN60309 providing ingress protection to IP44 and added durability and protection from being dropped or dragged around. Trailing leads are ideal for use with transformers, site lights and power tools to extend their working range. 110VLength: 14m110V 16 amp socket110V 16 amp Plug2.5mm cable
These Flexipads pads are made from the highest quality German foam, backed with velour for use with a GRIP® backing pad. They are used to create a high gloss without haze or holograms.This Black finishing pad features a soft waffle pattern for advanced compound control.
Senco DuraSpin® Collated Decking screws with a green Weatherex coating. Square No.2 drive, coarse thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Decking Screws with Weatherex coating. Size: 4.2 x 50mm.
Senco 34° angled collated brad nails with a sharp chisel point, smooth shank, D-head and Galvanised finish.Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 44mm.
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 2 with the following dimensions: T15 x 25mm.
Flex Power Tools DT-XF 12 PXE Random Orbital Adaptor for correcting defects, removing holograms and for finishing. Can only be used with the PXE 80 10.8-EC Spot Polisher. Combined with: 30mm Velcro pad for polishing and the 75mm Velcro pad for polishing and grinding. Specification: Oscillation Diameter: 12mm
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Type : Ring.Length : 50mm.Pack : Box of 2000.
The Starrett TCT Stainless Steel Holesaws are ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than is possible with a bi-metal holesaw. Tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf. They have a solid one-piece construction, with complete assembly including arbor and pilot drill. A split-point drill bit allows for faster penetration and self-centring helping keep the drill on target and to prevent wandering. Fitted with ejector spring for easy core removal. Ideal for production cutting, and particularly suitable for use in drills with limited speed control. Recommended for cutting sheet metal up to 3mm (1/8in) thick.
The world's fastest professional worktop scriber tool. It completes traditional scribing chores with precision, speed and ease. Quick and easy-to-use by remaining stable whilst scribing directly onto work-surfaces, flooring, shelves etc. It works by running a wheeled scribe unit along an irregular feature. The sprung pencil in its centre will accurately copy the profile directly onto the work-piece to be installed. It can then be cut and fitted to the surface resulting in a perfect butt! Four sizes of quick fit track wheels to cope with a variety of situations. Design Reg. No. 3014615. Includes: 1 x pencil, 1 x body, 1 x 29 mm wheel, 1 x 50 mm wheel, 1 x 70 mm wheel, 1 x 90 mm wheel.
