Designed to fit comfortably in the hand this compact cassette reel not only ensures that the cable is fully protected while in storage or transit but also safe while in use, using a thermal overload protection system to prevent overheating damaging the cable. The cable reel feature four shuttered plug sockets, a BS approved plug and a back grip handle with a rotating winding knob makingit easy to wind and to use. Manufactured to Kitemark KM61209 Specifications: Length: 10 metre.Amps: 10.Sockets: 4.Volts: 240.Unwound 2400 Watt (10 Amps).Wound 720 Watt (3 Amps). Type: Cassette NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.
The DEWALT DT70758 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Brad Point Bits: 3, 4, 5, 6, 8, 10, 12mm 6 x Extreme Flat Bits: 12, 14, 16, 20, 22, 25mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: TX15, TX20(x22), TX25(x4), TX30, TX40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: TX20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide
The Faithfull Pre-cut aluminium oxide sheets manufactured from aluminium oxide on a flexible E-weight paper backing, these sheets are cut to the correct size and shape. Suitable for use with third sheet orbital sanders.Grade: Fine. Pack size: 5.
The Flex Power Tools TW-PT 80 Lambswool Polishing Pad consists of 90% natural wool and 10% polyester. This combination provides for longer service life and greater volume. It removes sanding scratches 30% faster than using a sponge. Ideal for UV paints and the latest generation of scratch-resistant paints. The special PerfectTouch sandwich design and extra orange foam layer give the pad that slight degree of cushioning and much greater stiffness. This allows for a perfect surface contact even in problem areas and an optimal and exact guiding.
Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications: D1 3/16 inch D1 4.75 mm D2 1/2 inch D2 12.7 mm Shank Diameter 1/4 inch.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 16 mmD = 5 mm 13/64in
These Paslode Twisted Nails have the following specification: Finish: ELECTROGALVSize: 35mmAngle: 3.4°Shank: TwistedPack Quantity: 1250Number of Fuel Cells: 2
The BlueSpot Tools Magnetic Nut Driver is manufactured from heat-treated and tempered steel alloy for increased strength and durability. With a blackened carbon coating to protect against corrosion. Strong magnets hold fasteners securely for ease of use. It has a 1/4in drive, ideal for use with electric drills and screwdrivers for the precise driving of nuts, bolts and hex head screws.
The quick release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size.3.2mm. 1/8in.Countersink Size. No.10.
This DEWALT Multi-Tool Sanding Platen has hook and loop paper attachment to allow sand paper to be easily attached. The platen has dust extraction capability when attached to a separate dust extraction unit. It is ideal for detail sanding of wood, metal and plastic surfaces.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504227 (T119BO) Wood Jigsaw Blades provide narrow curve cuts in hard and soft wood, plywood, particleboard and plastics 2-20mm.
These Faithfull Delta Sanding Sheets are manufactured from Aluminium Oxide abrasive on E-weight heavy-duty paper. They are ideal sanding wood, plastic and fillers. The sheets have a hook and loop system, enabling quick change. Specifications: Type: TR2. Size: 93mm. Pattern: 6 hole.Grade: P120 Grit Pack quantity: 25
Flexovit Delta hook & loop sanding sheets; tough and sharp high performance aluminium oxide, combined with a heavy paper backing makes this product extremely durable, long lasting and suitable for use on a variety of surfaces. Fits most brands of Delta sanders, the hook & loop backing allows quick and easy sheet changing and the perforated holes allow free and easy dust extraction. Suitable for use on: wood, paint and metal. Size: Delta Shape, 94mm.Packed in 6s
The bits in this Metabo 32 Piece Bit Set are made from chrome-vanadium-steel (S2-Quality), and colour ring coding for quick and easy identification. Supplied in a high quality, robust storage box with unique Metabo design. Also has an extendable toolbar hanger. Contains: 4 x 25mm Phillips Bits: PH1, PH2(2) & PH3. 4 x 25mm Pozi Bits: PZ1, PZ2(2) & PZ3. 4 x 25mm Hex Bits: H3, H4, H5 & H6. 4 x 25mm Slotted Bits: SL3, SL4, SL5 & SL6. 7 x 25mm Torx Bits: TX10, TX15, TX20, TX25, TX27, TX30 & TX40. 7 x 25mm Torx Tamperproof Bits: TX10, TX15, TX20, TX25, TX27, TX30 & TX40. 1 x 1/4in Head Adapter. 1 x Quick Release Bit Holder.
Rohm PRIMA heavy industrial plain bearing chucks are widely used for stationary and hand operated percussion drilling machines. These industrial quality chucks have fully hardened and ground working components which offer exceptionally high accuracy , gripping power and durability.
PRIMA plain bearing chucks are widely used for hand operated percussion drilling machines. Smaller and intermediate sizes. Industrial quality chuck with fully hardened and ground working components which offers exceptionally high accuracy , gripping power and durability.
The Trend CR/DWS/F4/FC is a 4 inch double sided diamond stone with folding handle and monocrystalline diamonds for fast, clean, stock removal which gives excellent sharpening performance. It is double sided for coarse sharpening and fine honing: Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged edge or blunt tools, including chisels and plane irons. The Fine is ideal for cabinet making for a fine finish and refines the cutting edges of chisels, small knives, etc - achieves a razor edge in seconds. With plastic ABS folding handle, that folds to protects diamond surface and oval holes design to collect and hold metal residue. Ideal for saw blades, chisels, knives, domestic and garden tools. Recommended use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mmD = 8 mm 5/16in
Aluminium Oxide fibre discs are tough and sharp, combined with a dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56835 backing pad, sold separately.1 x Pack of 10 Flexovit Aluminium Oxide Fibre Discs 115mm Fine 80g
