MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 230 x 22mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 125 x 22mm
MEXCO Extension Bars screw directly between the Diamond Core Drill and the Core Drill Adaptor to enable drilling through a cavity wall. Suitable for 1/2in BSP female to 1/2in BSP male fitments.
1 x MEXCO Extension Bar 150mm.
The MEXCO Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core melts, lubricates and cools when drilling. Supplied to fit M14 thread Angle Grinders although an M14 to Hex adaptor can be used with a High Speed Drill. Suitable for dry cutting.
The MEXCO XCEL Grade Diamond Tile Drill Bit Set in supplied in a robust carry case. Contains:4 x XCEL Grade Diamond Tile Drill Bits: 6, 7, 8, 10mm1 x M14 to Hex Adaptor1 x Cooling Wax
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 115 x 22mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 200 x 25.4mm
MEXCO GPX90 Concrete Diamond Blades provide the user with excellent cutting characteristics in the majority of non-abrasive construction products used in the UK.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 10mm (12mm on 300mm + diameter)
1 x MEXCO GPX90 Concrete Diamond Blade 450 x 25.4mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 250 x 25.4mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 65mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 38mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 178 x 450mm
MEXCO Professional Crown Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss. Suitable for wet cutting.
1 x MEXCO Wet Core Drill (Crown Segment) 20mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 162 x 450mm
MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 48mm
The MEXCO FCXCEL Grade Flush Cut Diamond Blade is designed to be used on angle grinders for both straight and flush cutting. These blades are fitted with a detachable flange mount with an M14 thread attaching directly to most angle grinders. The flush face gives the opportunity for deep cutting and flat finishing.
1 x MEXCO FCXCEL Grade Flush Cut Diamond Blade 125 x 22mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 152 x 450mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 150 x 22mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 127mm
The MEXCO X90 Grade Mortar Raking Diamond Blade offers fast removal of mortar joints between bricks, natural stone, blocks and facing bricks. Mortar raking blades can also be used in the cutting of lead flashing channels.
1 x MEXCO X90 Grade Mortar Raking Diamond Blade 125 x 22mm
Flex Power Tools Fine Polishing Pad for a maximum deep sheen. When combined with black polish it’s ideal for removing slight scratches, holograms and for general colour refreshing. The special reticulation makes them highly tear-resistant and durable.
Pack of 2 Flex Power Tools Fine Polishing Pads 75mmSuitable for: PE 8-4 80 230/BS, PE 14-2 150 230/BS, PE 150 18.0-EC/5.0 P-Set, PE 150 18.0-EC/5.0 Set, PXE 80 10.8-EC/2.5 P-Set, PXE 80 10.8-EC/2.5 Set, PXE 80 10.8-EC/2.5 Set UK, PXE 80 12-EC, XFE 7-12 80 230/BSSpecifications:Diameter: 75mmHeight: 20mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 162mm
The MEXCO X90 Grade Cup Grinders are designed for use in conjunction with grinding machines and angle grinders for the preparation or finishing of construction site materials. These products are especially suited for the preparation or repair of concrete and natural stone, the turbo segment offers a smoother finish.
1 x MEXCO X90 Grade Cup Grinder 115mm
MEXCO Extension Bars screw directly between the Diamond Core Drill and the Core Drill Adaptor to enable drilling through a cavity wall. Suitable for 1/2in BSP female to 1/2in BSP male fitments.
1 x MEXCO Extension Bar 460mm
The MEXCO Bullnose Profile Wheel is the perfect tool for producing a bullnose profile edge on a range of materials; including Natural Stone, Slate and Porcelain.
1 x MEXCO Bull Nose Profile Wheel 115 x 32mm Profile
Flex Power Tools Medium Polishing Pads. Ideally suited for moderately-scratched paintwork, traces of use and for refreshing the colour of used paintwork with subsequent sealing in just one step when combined with the violet polish. The special reticulation makes them highly tear-resistant and durable.
Pack of 2 Flex Power Tools Medium Polishing Pads 150mmSuitable for: PE 14-2 150 230/BS, PE 150 18.0-EC/5.0 P-Set, PE 150 18.0-EC/5.0 Set, XCE 8 125 18.0-EC/5.0 P-Set, XCE 8 125 18.0-EC/5.0 Set, XCE 8 150 18-EC C, XCE 10-8 125 230/BS, XFE 7-15 150 BS, XFE 15 150 18.0-EC/5.0 P-Set, XFE 15 150 18.0-EC/5.0 Set.Specifications:Diameter: 150mmHeight: 20mm
MEXCO UNC Extension Bar for extending the working length when diamond core drilling. Will fit any diamond core bit which has 1 1/4in UNC fitment.
1 x MEXCO UNC Extension Bar 400mm
These DEWALT 9G G12 Galvanised Staples are designed to be used with the DCFS950 Fencing Stapler. G12 galvanised for outdoor durability.Pack of 960 DEWALT DFS9175B1G 9G G12 Galvanised Staples 45mm
This 25 Piece DEWALT DT70779T Flip and Drive Set allows for quick pilot hole drilling and screw tightening. Designed for impact resistance and longer life, the set features a precision countersink design, compatibility with quick-change systems, and FLEXTORQ SCREWDRIVER BITS for reduced cam-out.Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:
3 x 25mm EXTREME FLEXTORQ Phillips Screwdriver Bits: PH1, PH2(x2)
5 x 25mm EXTREME FLEXTORQ Pozi Screwdriver Bits: PZ2(x3), PZ3(x2)
7 x 25mm EXTREME FLEXTORQ Pozi Screwdriver Bits: T15, T20(x2), T25(x2), T30(x2)
4 x Countersinking Drills: No.6, No.8, No.10, No.12
3 x Replacement Pilot Drill Bits: No.6, No.8, No.10
1 x Hex Key
1 x Flip Drive
1 x Quick-release Extension
This Evolution Mild Steel Cutting Mitre Saw Blade has the following specification: Diameter: 210mmBore: 25.4mmTeeth: 50Kerf: 2.4mmMax. Speed: 3,750/rpm
The Evolution XL Rolling Mitre Saw Stand made with universal fittings and 5-position height adjustment. It can support work pieces up to 4m in length and up to 300kg in weight. Perfect for handling full length ceiling beams and floor joists. The telescopic legs ensure fast and easy to set up out of the box. Compact when folded down and fitted with wheels, meaning it can be manoeuvred with one hand. This also makes it easy to store when not in use. This versatile and portable Mitre Saw Stand is perfect for home, workshop and heavy-duty on-site use. Supplied with a pair of quick-release mitre saw stand rail clamps. It also comes with a set of extender brackets for extra large saws from other manufacturers. Specifications: Max. Length Material Support: 4m.Height Range: 615-840mm (5 steps).Max. Load: 300kg.Max. Saw Mounting Hole Spacing: 680 x 370mm.
A medium density 130mm (5in) polishing foam. For general use. Use with the kit FLE88005 backing pad or the drill backing pad FLE88010.With GRIP® fastening.Made in Great Britain.
The Bosch EXPERT Thick Tough Metal Reciprocating Saw Blade not only cuts thick metal, it offers exceptional lifespan in the toughest of applications. It has a wide body for precise, straight cuts. Fits all S-shank reciprocating saws.
Pack of 10 Bosch EXPERT Thick Tough Metal S1155CHC Reciprocating Blades 225mm x 8 TPI.
