The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. DEWALT nails are made from inspected high quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining.These DEWALT DNBA1650GZ 16 Gauge 20° Finish Nails have the following specification: Length: 50mm.Type: 20° Angled Nails.Finish: Galvanised.Gauge: 1.6 (16GA).Box Quantity: 2500.
This Evolution Multi-Material Blade has been designed specifically for Evolution 185mm Circular Saws and Chop Saws only. Made from premium materials in Japan. Ideal for the construction professional and for daily use on a construction site. Designed to cut mild steel*, aluminium, plastics and wood, even wood containing embedded nails, with a single blade. Perfect for cutting hard and softwood, decking, laminate flooring, mild steel angle, Unistrut® and conduit, plywood, MDF, aluminium checker plate, plastic pipes and sheet, plus many other materials. *Please refer to the blade marking for recommended cutting capacity on mild steel. Compatible with the following Evolution machines: R185CCSL, R185CCS, R185CCSX, R185CCSX+ and RAGE4. Specification: Diameter: 185mmBore: 20mmTeeth: 20Kerf: 1.7mmMax. Speed: 3,900/rpm
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inThe Trend CO24AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard.All cutters have a bottom cut feature.Diameter: 15 mm.Cutting depth: 25 mm.Shank diameter: 1/4 in.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 10mmC - Cutting Length - 19.1mmT.C.T.
The Bahco Wood & Metal Bi-Metal Reciprocating Blade has been designed for demanding cutting in wood, even with embedded nails, but it can also be used for thick metal materials. Made from virtually unbreakable Sandflex® bi-metal with precision ground teeth. Thicker blade design with a sloped, narrow nose that makes it easy to use in narrow places but still rigid. It also has a higher resistance to fracturing and bending, allowing straighter cuts.
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 50 SKU BT1350GA Finish GALV Description MINIBRADS 50 GALVA 5M Qty per box 5000
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Type - Stick nail RingGauge/Diameter (mm) 2.8 Length 50 Collation Angle 28 DegreesSKU S280R50G8 Profile RING Finish G8 Description STICK NAIL 2.80-50 RING GAL8 2M Qty per box 2000 Note: This nail will also fit the N80SB, FW28WW-E, N100S
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 2 with the following dimensions: T20 x 25mm.
These Paslode IM360 Nails have the following specification: Finish: Hot Dipped GalvanisedSize: 3.1 x 63mmShank: RingPack: Box of 2,200Number of Fuel Cells: 2
The BlueSpot TORX Bit Set contains a selection of bits, drop forged from heat treated chrome vanadium steel for increased durability. Suitable for hand and power tools. Complete with handy carrying case for quick and easy storage. Contains the following: 7 x 30mm TORX Bits: T20, T25, T30, T40, T45, T50 & T557 x 75mm TORX Bits: T20, T25, T30, T40, T45, T50 & T551 x 1/2in Adaptor
This DEWALT Multi-Tool Blade has carbide grit and is designed for grout removal. The blade is quick and easy to change and fits all common oscillating tools. Specifications:Blade length: 25mm.Blade diameter: 95mm.Blade thickness: 3mm.
This DEWALT Multi-Tool Blade is specifically designed for flush cutting applications. It has a bi-metal construction for improved durability. The blade is quick and easy to change and fits all common oscillating tools. Suitable for use on the following materials:Wood with nails.Wood.Drywall.PVC. Specifications: Blade length: 23mm.Blade width: 100mm.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX15Z 18G Galvanised Staples 15mm
Masterplug 110 Volt low voltage cable reel with thermal cut-out to prevent overheating. With 2 x 16 Amp Sockets and a sturdy tubular steel frame. Available in 25 metre or 50 metre lengths and manufactured to BS EN 61242.50 metre arctic cable.
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.
The ForgeFix ForgeFast Impact Magnetic Screw Holder with a 1/4in hex shank is made from specially engineered hardened steel to extend wear resistance and bit life. Fitted with an ultra-strong magnet for a secure hold. Finish: Black Phosphate
This Lessmann Knotted Wheel Brush has the following specification: Wire Type: SteelWire Gauge: 0.50Diameter: 75mmWidth: 16mmShank: 6mmMax Speed: 20,000/rpm
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brushes are ideal for removing underseal, rust, de-burring and roughening. It has the following specification: Wire Type: Steel.Diameter: 75mm.Width: 8mm.Shank: 6mm.Wire Gauge: 0.50.Max Speed: 20,000/rpm.
The Lessmann DIY Wheel Brushes are fitted with a 6mm shank and are generally used for the removal of rust, paint or dirt and for roughening, de-burring, stripping or polishing. Available in Steel or Brass.The Lessmann DIY Wheel Brush has the following specification: Wire Type: SteelDiameter: 75mm.Width: 8-10mm.Wire Gauge: 0.30.Shank: 6mm.Max Speed: 4,500/rpm.
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0.35 Steel, Diameter: 50mm.430.133.07: Wire: 0.35 Steel, Diameter: 75mm.430.126.07: Wire: 0.25 Brass, Diameter: 50mm.The Lessmann DIY Cup Brush has the following specification: Wire: 0.35 Steel.Diameter: 75mm.Max/Min: 4.500.
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 80 x 30mmGrade Coarse (60 Grit)
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 210mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.4mm.Tooth Config: ATB.
