Bosch Screwdriver Bit Set supplied in an ‘easy to select’ flip-over case. Contains: 3 x 25mm Phillips Bits: PH1, PH2 and PH33 x 25mm Pozidriv Bits: PZ1, PZ2 and PZ34 x 25mm TORX Bits: TX15, TX20, TX25 and TX303 x 25mm Hex Bits: 4, 5 and 6mm3 x 25mm Slotted Bits: 4.5, 5.5 and 8mm 3 x 50mm Phillips Bits: PH1, PH2 and PH33 x 25mm TORX Bits: TX15, TX20 and TX252 x 25mm Slotted Bits: 4.5 and 5.5mm 1 x Magnetic Adaptor
240 Volt Cassette Cable Reels fitted with safety thermal cut-out to prevent overheating, a safety reset button, safety socket shutters and 4 sockets. Manufactured to BS EN 61242.This Masterplug MCT08134R has 8 metres of 13amp arctic cable.
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.The TR40D has a center tip for drilling abrasive materials.Dimensions:Shank: 1/4 inCutting Diameter (D): 15mmCutting Length (C): 25mm
These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.Drill Size.3.5 metre (9/64in).Screw Size. No.10
Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.Outside Diameter:- 3/4inInside Diameter:- 1/4inThickness:- 9/32in
Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/4in Shank.R = 3.2 mmD = 22 mmd = 18.9 mmB = 12.7 mm
This stanley 10 piece screwdriver bit set is supplied in a flip up plastic storage box. Contains: 3 x 25mm Phillips Bits: PH1, PH2 & PH3.3 x 25mm Pozi Bits: PZ1, PZ2 & PZ3.3 x 25mm Slotted Bits: 4.5x0.6, 5.5x1.0 & 6.5x1.2mm.1 x Magnetic Bit Holder.
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 915 x 100mm 40g
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Brad nails for Bostitch models BT200K-2 and SB1850BN nailers. Both 15 to 50 mm maximum. Gauge/Diameter (mm) 18 GA Length 40 SKU BT1340GA Finish GALV Description MINIBRADS 40 GALVA 5M Qty per box 5000
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.Pack of 3 Faithfull Cloth Sanding Belt 533 x 75mm Fine
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No.2 Phillips.Length: 25mm x 1/4-inch hex.Pack quantity: 3.
The BlueSpot 12 Piece Power Bit Set features a range of popular Slotted, Phillips and Pozi power bits. Contents : 3 x 25mm bits (6mm, PH2 and PZ2)3 x 50mm bits (6mm, PH2 and PZ2)3 x 65mm double ended bits (6mm, PH2 and PZ2)3 x 150mm bits (6mm, PH2 and PZ2)
Pro-quality internally metal threaded flexible backing pads without foam layer, with GRIP® fastening. Versatile backing pad with some flexibility to adapt to most situations. Made in Great BritainAbrasive Diameter : 115mmSurface Diameter : 113mm
Ultra soft and particularly good for dark colours and special polishes where a very soft sponge is required. Made in Great BritainType: GRIP® fastening. Use with Flexipad foam support pads 36350 (M14), 36355 (5/8)
Medium flexibility grinder pads ideal for standard use. They feature a threaded metal insert moulded into the pad as well as the removable locknut. Made in Great BritainType: 171-XUTo suit: 178 mm Angle Grinders.Thread: 5/8 x 11 UNC. Abrasive Disc Size: 178 mm x 22 mm (7in). Machines Fitted.5/8 UNC Internal Thread and quick release lock nut.Atlas Copco, CP, Compare, Desoutter, Ingersoll Rand, Kango, Wolf 4157. Pin Spanner - Blue
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of sizes and wire styles are available.Diameter. 125mm.Wire Height. 40mm.Bore. M14.Wire Gauge. 0.35. Wire Type. Steel.Max. R.P.M. 6,500
This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork. Manufactured to EN 13236 Standards.This Faithfull Contract Diamond Blade has the following specification: Size: 115mmBore Size: 22.2mmPack Quantity: 1
This Trend CraftPro Table Saw Blade Triple Pack contains a selection of same diameter Tungsten Carbide Tipped circular saw blades, designed for a professional finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. High-grade alloy steel plate body precision ground to maintain flatness. Silver brazed to ensure tips are securely bonded to body. With a reamed bore to ensure a precise spindle fit. Laser etched on reverse to European standard EN 847-1/2. Contains: 1 x CSB/25048 General-Purpose Table Saw Blade 250 x 30mm x 48T 1 x CSB/25060 Fine Finish Table Saw Blade 250 x 30mm x 60T 1 x CSB/AP25084 Aluminium & Plastic Table Saw Blade 250 x 30mm x 84T
This Evolution Short Broaching Cutter Kit is supplied in a handy plastic sotrage case. Contains: 6 x Short (25mm) Broaching Cutters: 12, 14, 16, 18, 20, 22mm1 x Pilot Pin
Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals.This TCT Countersink clamps onto any drill between 3 mm and 7.2 mm in diameter. The drill passes through the body of the countersink and is secured by two hexagon bolts which clamp the countersink onto the drill at the required position. Recommended for wood and man made boards.By reversing the countersink on the drill the UNI / CS can be used as a non-cutting depth stop. NOTE:- Drills not included.
DEWALT Construction Circular Saw Blade for use with portable machines to cut softwoods and composite materials. The impact resistant carbide teeth help to reduce the chance of chipping or breaking a tooth. With ultra-sharp cutting edges and Alternate Top Bevel (ATB) teeth to reduce splinters. The blade features a wedge shoulder to protect the carbide from nail impact. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations, rough timber and cutting through embedded nails.This DEWALT Construction Circular Saw Blade is for the cutting of rough timber, possibly with embedded nails. Specification: Blade Diameter: 235mmBlade Bore: 30mmTooth Count: 24Plate Thickness: 1.7mmKerf Thickness: 2.6mmGrind Type: ATBRake Angle: +20°
