Designed to meet the needs of both the professional tradesman and the home handyman.All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.Ovolo produces a stepped rounded profile along the edge of the material. The guide pin enables the cutter to follow intricate shapes. 1/4in Shank.Radius 6.3mmDepth of Cutter 13.3mmShank Diameter 1/4in
The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. The jig has the following features: Left and right hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Engraved lines for 65mm bolts and worktop cross-cut. 6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes including setting up and left hand and right hand corners, 400 mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100 mm radius corner, 40 mm radius corner, 35 mm kitchen door hole and 3/4 inch BSP hole for mixer taps. It covers fixed lengths for 400 mm, 500 mm, 550 mm, 600 mm, 616 mm, 650 mm, 700 mm and 900 mm wide worktops and can cuts up to 40 mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150 mm bolts. Engraved lines for short 65 mm bolts and worktop cross-cut. 10 mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Specification:Length: 1185 mm. Width: 390 mm. Thickness: 12 mm. Weight: 7.7 Kg. End cut: 45 degrees. Corner radius: 40 mm. Corner radius: 100 mm. Corner radius: 400 mm. Corner mitre joint: 45 degrees.
The DEWALT Torsion Pozi Bits have a hardened core for extra strength and durability. They have a flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only). The design features extra grip ribs that grip the screw and reduce slipping (specific bits only). They are tough quality, professional screwdriver bits.DEWALT DT7211 Torsion Bits PZ1 25mm Pack of 5
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.The DEWALT DT2077 (T244D) HCS Scroller Blades are ideal for fast curve cutting in wood and chipboard up to 60mm thick.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. These DEWALT BLACK GOLD Hex HSS-G Drill Bits have the following specifications: Tip Diameter: 2.5mm.Length: 60mm.Working Length: 14.6mm.Pack Qty.: 2.
These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.Drill Size. 2.0 mm (5/64in).Screw Size. No.6.
The Faithfull TRAN15 is designed for use on the worksite to provide power to industrial powertools.This single outlet 110 Volt 16amp transformer has a heavy-duty GRP weatherproof case which is rated to IP44, making it fully weatherproof and therefore suitable for use in most types of outdoor and worksite conditions. This Faithfull 1.5 kVA transformer has great safety features that include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with a BS approved 13 amp rubber plug. Not suitable for use on 110v heaters.
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the work.For use with the Bostitch headless pinner.Length 12 SKU 1061200SE Finish STANOX (Copperwash)Description Mini Pin 12mm Stanox 20m Qty per box 20000 Suits: TU216-2330 Tacker
Faithfull Professional Security Screwdriver Bits are designed for use with tamper-resistant, security TORX (Star) head fixings which have a small pin inside their drive recess to prevent the use of a standard TORX driver, tamper-proof fixings of this type are often found on electrical appliances. Manufactured from high-strength, heat treated ‘S2’ grade steel. These bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.Pack of 3 Faithfull Security S2 Grade Steel Screwdriver Bits T25S x 25mm
A one-piece tongue and groove set. The parts are inter-changed on the arbor to alter the set up. Maximum timber thickness 22 mm. Minimum timber thickness 15 mm. Instructions for use are supplied. TCT.1/2in Shank. Slot Sizes 3.35 mm - 10 mm.Max depth of slot 9.5 mm
RUBI Diamond Grinding Bits are specially designed to enlarge or modify the diameter and shape of a previously drilled hole. They can also be used for smoothing, polishing or cleaning the inside edges of previously drilled holes.Suitable for landscaping materials. Diamond grinding bits are NOT suitable for drilling holes.
1 x RUBI Cylindrical Diamond Grinding Bit 10mm.Specifications:Diameter: 10mm.Max. Drill Length: 50mm.Revolutions per Minute: 11,000 max.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. 1 x DEWALT 8.5mm Black And Gold Hex Drill Bit HSS.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. These DEWALT BLACK GOLD Hex HSS-G Drill Bits have the following specifications: Tip Diameter: 4.5mm.Length: 85.5mm.Working Length: 35.6mm.Pack Qty.: 1.
This SCANGRIP Diffuser is designed to spread and soften the light, enabling you to illuminate an entire workspace and avoiding hard shadows. It gives you increased functionality and new possibilities to adapt your work light even further to the specific work task. The cover is incredibly smooth and lightweight. Strong built-in magnets make it easy and safe to mount the cover on your SCANGRIP lamp.This SCANGRIP Large Diffuser fits the following lights: Nova 6 K C&R & Nova 10 CAS. Specification: Width: 129mm
DEWALT FlexTorq Screwdriver Bits are impact rated for use in impact drivers and feature extended FlexTorq torsion zones which are designed to absorb extreme forces, transferring them to the optimised geometry of the bit tip. Reducing the load on the driver and fastener means secure fixing with longer service life.Supplied in a TOUGH CASE&, this is part of a connectable case system which is TSTAK compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 5 x 25mm Phillips Bits: PH2(x3) and PH3(x2).15 x 25mm Pozi Bits: PZ1, PZ2(x11) and PZ3(x3).6 x 25mm TORX Bits: T10, T15, T20, T25, T30(x2).2 x 25mm Slotted Bits: 6mm and 8-10mm. 1 x 57mm Phillips Bit: PH2.4 x 57mm Pozi Bits: PZ2(x3) and PZ3. 1 x 85mm Pozi Bit: PZ2. 1 x 1/4in Hex to 1/4in Square Adaptor.1 x 1/4in Hex to 3/8in Square Adaptor. 1 x Compact Magnetic Drive Guide. 1 x 8mm Cleanable Socket Driver. This set also comes with a Pair of Tinted Safety Glasses.
A flat twist knot high tensile steel wire circular brush compatible with 125 mm (5in) angle grinders with a 22.2 mm (7/8in) bore standard angle grinder flange plate. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Type: Circular Diameter: 125 mm x 12 mm face Bore 22.2 mm Wire: 0.50 mm twist knot steel Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.
Flexovit 1/3 hook & loop sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. The hook and Loop backing allows quick and easy sheet changing. Suitable for use on wood, paint and metal. Size: 93 x 185mm. 8 hole.Size : 93 mm x 185 mm Perforated for use with Black and Decker Sanders Packed in 6s
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special steel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 80mmBore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max. R.P.M. 8,500.
This Faithfull Wire Cup Brush is designed for use with angle grinders with a compatible thread. It is suitable for industrial use and more specialist applications. Crimped wire brushes are designed for lighter to medium-duty applications such as cleaning metal surfaces prior to painting.Wire: Steel Type: Cup Face Diameter: 150mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 6,500.
The DEWALT DT70759 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Masonry Drill Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 12 x Extreme 2® HSS-G Drill Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH325 x 25mm Pozidriv Bits: PZ1, PZ2(x23), PZ39 x 25mm TORX Bits: TX15, TX20(x3), TX25(x3), TX30, TX40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: TX20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide
1 x Pack of 10 IRWIN® Impact Pro Performance Screwdriver Bits PZ2 25mm. IRWIN® Impact Pro Performance Pozidriv Screwdriver Bits have been engineered for maximum durability and turning force when used in extreme applications. The full fit head eliminates wobble and screw head roundings. With a contoured area, so the bit tip flexes with the torque of the impact driver. Flex optimised to transfer maximum torque through the screw and maximise life.
The Tacwise fine wire staple is commonly used for semi-industrial/DIY applications. This staple is thinner than the 140 type and not so visible. Suitable for the Tacwise Z1-53, Z1-53l, Z1-53T, Z3-53, Z3-53L and the Hobby 53EL as well as the Arrow JT21, Rapid R53 and other brands taking the popular 53 staple.
Zenith Sisal mop for use with polishing compounds, e.g. grey GBF/264 compound.Zenith sisal mop for use with polishing compounds, e.g. grey GBF/264 compound. Size: 4in x 2 section.
Zenith Sisal mop for use with polishing compounds, e.g. grey GBF/264 compound.Zenith sisal mop for use with polishing compounds, e.g. grey GBF/264 compound. Size: 6in x 2 section.
The MEXCO Unslotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Unslotted Dry Core Drill X90 Grade 38mm
These Faithfull Multi-Functional Tool Flush Wood/Metal Blades have HSS wavy set teeth that make them ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. It is ideal for many flush cutting applications and plunge cutting in plasterboard. Compatible with many multi-function oscillating power tools.Width: 22mm.
These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S1118BF Saber Saw Blades are ideal for pallet repair, with nails/metal (5-150mm), sheet metal, pipes, aluminium profiles (3-12mm). They have a flexible flush cut. Specification: Length: 200mm (8in)Teeth: 10 TPI
This Faithfull Wire Cup Brush is designed for use with angle grinders with a compatible thread. It is suitable for industrial use and more specialist applications. Crimped wire brushes are designed for lighter to medium-duty applications such as cleaning metal surfaces prior to painting.Wire: Steel Type: Cup Face Diameter: 100mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 8,500.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett SK FB Carbon Bandsaw Blade 1575 x 6 x 0.35mm x 6T.
The DEWALT DT20733 Fastcut Wood Multi-tool Blade is suitable for a wide range of cutting applications, including wood, plasterboard and PVC. UNIVERSAL FITMENT™ for adaptor-free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Specifications: Width: 43mm.Length: 30mm.
The Evolution RAGE8® Wood Blade Pack contains the following: 1 x Green Wood Blade ideal for pruning and cutting both green and fuel wood. The reinforced tooth design ensures higher performance in the most demanding jobs, with precision ground cutting edges for faster chip removal. 1 x General Wood Blade for fast and smooth cuts. This blade has a 4mm tooth diameter ensuring a good balance between speed and precision, with a plunge tooth design for easy and fast plunge cuts.
