Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 25/64 in 10.0mmC - Cutting Length - 3/4in 19.1mmT.C.T. 2 Flutes.
This Trend 1/4in Router Cutter Set has a range of tungsten carbide tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 25mm.1 x V-Groove: 45° x 12.7mm.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Ogee: R4mm.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 35 mmD = 10 mm 25/64 in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 12.7 mm 1/2in
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 9.5 mmD = 32 mmC = 16 mmBearings = 9.5 and 12.7 mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.TCT extra long cutter. Designed for hollow honeycomb board worktops. * Use only on professional routers with 80 mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.C = 50 mmD = 12.7 mm 1/2 inD = 12.7 mm.C = 50 mm.
This SCANGRIP Diffuser is designed to spread and soften the light, enabling you to illuminate an entire workspace and avoiding hard shadows. It gives you increased functionality and new possibilities to adapt your work light even further to the specific work task. The cover is incredibly smooth and lightweight. Strong built-in magnets make it easy and safe to mount the cover on your SCANGRIP lamp.This SCANGRIP Large Diffuser fits the following lights: Nova 6 K C&R & Nova 10 CAS. Specification: Width: 129mm
Irwin Phillips insert screwdriver bits engineered for use in hand-driving applications or with power tools, designed for use in insert holder with C-clip for retaining ring notch. Compact and versatile with a 1/4 inch hex body and made from high grade S2 Steel.Pack of 10 Phillips PH2 x 25mm long.
Irwin Speed Hammer Spade chisels for use with SDS Max machines. Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit. Suitable for use on concrete and masonry and are supplied in a grey sandblasted professional finish.The IRW10502190 Speedhammer Max Chisel Spade has the following dimensions:Width: 115mmLength: 350mm
The Masterplug MSTARCDKGMP RCD Safety Adaptor Plug simply plugs into the mains, then you plug your electrical appliance into it. If there is a fault or a short in the tool you are using, the unit cuts the power very quickly, reducing the risk of electrocution. The Masterplug Safety RCD Adapter continuously monitors the power supply to an electrical appliance and cuts off the power within 40 milliseconds if an earth current fault is detected. This is fast enough to prevent a fatal electric shock. The Masterplug RCD Safety Adaptor Plug is an ideal way to protect yourself when using portable electrical tools, like lawnmowers, hedge trimmers and mains powered drills. Electrical appliances can become dangerous if the wiring becomes loose, or their power cords become damaged or if they get wet. Not only power tools and lawnmowers can cause electrocution is also possible if fingers, wet hair or other conductive bodies enter the appliance. In all these cases the Masterplug Safety RCD is a must. Not suitable for pond pumps and other pond equipment as when these are removed the installation is unprotected. Safety RCD (Circuit Breaker)Can be used with any 240v appliance.Particularly recommended for use with power tools.
The Faithfull Pre-cut aluminium oxide sheets manufactured from aluminium oxide on a flexible E-weight paper backing, these sheets are cut to the correct size and shape. Suitable for use with third sheet orbital sanders.Grade: Coarse. Pack size: 5.
The SMJ Surge Protection Extension Leads are fitted with a power and surge indicator neon. The three channel surge protection that will activate during a power or mains surge, protecting your electrical items and are therefore ideal for home TV and audio equipment, power tools and portable devices. Designed to fully comply with the latest British Standards and Electrical Equipment Safety Regulations.SMJ S4WISP White Extension Lead On this model it has individually switched sockets and features a power and surge indicator neon.
These Faithfull Drill Saw Rasps can be used to drill pilot holes in material and then can be used as a saw to cut shapes. They can also be used to enlarge existing holes. This set consists of:1 x metal drill saw rasp 6.5 x 90 mm. 1 x wood drill saw rasp 6.5 x 90 mm.
The Faithfull FPPFLYLEAD Fly Lead converts a 240V, 16 amp 3-pin plug to a 240V, 13 amp 3-pin socket. It is ideal for camping, caravanning and on-site generators. Lead length: 35cm.
The Faithfull Multi-Cut Cutting Discs will cut a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC. These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safe keeping.Pack of 10 Faithfull Multi-Purpose Cutting Discs 100 x 1.0 x 16mm
Aluminium Oxide fibre discs are tough and sharp, combined with a dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56835 backing pad, sold separately.1 x Pack of 3 Flexovit Aluminium Oxide Fibre Discs 115mm Extra Coarse 36g
Aluminium Oxide fibre discs are tough and sharp, combined with a dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56835 backing pad, sold separately.1 x Pack of 3 Flexovit Aluminium Oxide Fibre Discs 115mm Medium 50g
The Masterplug SCT04134W 240 Volt cassette cable reel has a thermal cut out to stop cable overheating, a safety reset button, 4 sockets and 4 metres of 13 amp arctic cable. Manufactured to BS EN 61242.
The BlueSpot Tools Hex Bit Set contains a selection of bits, drop forged from heat treated chrome vanadium steel for increased durability. Suitable for hand and power tools. Complete with handy carrying case for quick and easy storage. Contains the following: 7 x 30mm Hex Bits: 4, 5, 6, 7, 8, 10 & 127 x 75mm Hex Bits: 4, 5, 6, 7, 8, 10 & 121 x 1/2in Adaptor
