The DEWALT DT71516 Socket & Screwdriving Set contains a set of sockets, 6-13mm and ;a variety of popular screwdriver bits. Supplied in a durable storage case built with a metal clasp fastening and a belt clip for easy accessibility. Contains: 6 x Sockets: 6, 7, 8, 10, 11 & 13mm.3 x 25mm Pozi ;Screwdriving ;Bits: PZ1, PZ2 & PZ3.3 x 25mm ;Phillips ;Screwdriving ;Bits: PH1, PH2 & PH3.6 ;x 25mm ;Torx ;Screwdriving ;Bits: T10, T15, T20, T25, T30 & T40.3 x 25mm ;Hex ;Screwdriving ;Bits: ; 4, 5 & 6.1 x Wrench.1 x Bit ;Tip ;Holder.1 x Adaptor.
These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 32mm
The DEWALT SDS Max steel flat chisels are made from toughened steel which ensures tough bits. They also feature micro-processor controlled heat treatment for consistently tough, long life and have a flat end.The DEWALT DEWDT6825QZ SDS Max steel flat has the following dimensions:Width: 80mmLength: 300mm
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3113 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 80.Pack quantity: 10.
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No. 2 Phillips.Length: 25mm x 1/4-inch hex. Box of 25.
The Faithfull Tripod Safety Sitelight is designed for both commercial or domestic use, and features the latest SMD LED lighting technology. Combining a high light output with the added advantage of a low power consumption and cool running temperature, the LED site light avoids the burn hazards commonly associated with halogen lighting. Unlike conventional halogen tubes, SMD LEDs are maintenance free and more resilient to damage. This light benefits from dual power. In the event of a mains failure, the back up battery will power the light, ensuring site safety at all times. It can be powered by mains or via the built-in lithium battery which allows for 50 minutes of 900 lumen lighting. The battery is automatically charged when the light is plugged into the mains. The slim and lightweight die-cast aluminium lamp head is IP54 rated for water and dust ingress protection - while the impact resistant glass lens makes these site lights a durable solution. Its also fully adjustable and mounted on a sturdy floor stand - so can either be used as a pod light or mounted directly on to the telescopic tripod. Two twist grip locks enable the tripod height to be quickly adjusted between 1010mm and 2000mm.This Faithfull Safety Sitelight has the following specifications: Mains Voltage: 240V.Battery Voltage: 3.7V.Power (Mains/Battery): 45W 10W.Light Source: SMD.Lumens (Mains/Battery): 4500±10% / 900LM±10%.Color Temperature: 6500K.CRI: ≥80.Beam Angle: 120 degree.Battery Charging Time: 3-4 hours.Working Time in Battery Mode: Max. 50 minutes.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.Use High Speed tooling when working with softwoods such as Pine. H.S.S Tooling1/4in Shank.C = 28 mmD = 6.3 mm 1/4 in
Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges TCT. Diameter = 12.7 mmCitting Length = 25.4 mmShank size: 1/2in.
This Trend CraftPro Saw Blade Triple Pack contains a range of same diameter saw blades, designed for a professional finish in softwood, hardwood, plasterboard, stone fibreboard, particle board, veneer, plywood, MDF and hardboard. Microgranular Tungsten Carbide tipped to allow for cutting of abrasive materials. Silver brazed to ensure tips are securely bonded to body. With a reamed bore to ensure a precise spindle fit. Laser etched on reverse to European standard EN 847-1/2. Contains: 1 x CSB/19024 Combination Cut Saw Blade for Hand Held Saws 190 x 30mm x 24T 1 x CSB/19040 General-Purpose Saw Blade for Hand Held Saws 190 x 30mm x 40T 1 x CSB/19060 Saw Blade for Hand Held Saws 190 x 30mm x 60T
The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing. They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains: 1 x 2.0mm (5/64in) Drill and C/S Size No.4.1 x 2.4mm (3/32in) Drill and C/S Size No.6.1 x 2.8mm (7/64in) Drill and C/S Size. No.8.1 x 3.2mm (1/8in) Drill and C/S Size. No.10.1 x 3.6mm (9/64in) Drill and C/S Size. No.12.Tungsten Carbide tipped version , these tools can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.D = 15mmC = 25mmOL = 67mm
Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc.Compared to dowelling, biscuit joinery is faster and more precise.The biscuits are made of laminated beech which is then compressed before being die cut.Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e.g. PVA Glue).Trend BSC/0/100 Biscuits Size: No.0 (47.5 x 15.5 x 4 mm).Pack Size: 100.
These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.T.C.T.1/2in Shank.A = 45° C1 = 19 mmC2 = 26 mmD = 51.5 mmB = 12.7 mm
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 1/2in 12.7mmC - Cutting Length - 1 1/4 31.8mmT.C.T. 2 Flutes.
A one-piece tongue and groove set. The parts are inter-changed on the arbor to alter the set up. Maximum timber thickness 22 mm. Minimum timber thickness 15 mm. Instructions for use are supplied. TCT.1/2in Shank. Slot Sizes 3.35 mm - 10 mm.Max depth of slot 9.5 mm
The Trend Draining Groove Jig is perfect for routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined phenolic. It provides a 0.5° fall with grooves at 50mm pitch and 455mm long. With sight marks for lining up and three removable sloping runners for support. There is also a cutter diameter check hole and fixing holes for user made stops for repetitious work. Includes: 1 x Cove Cutter and 1 x Guide Bush (diameter 30mm). Specification Fall: 0.5°.Groove Pitch: 50mm. Groove Length: 455mm. Slat Width: 19.8mm.
These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.This set comprises a quick chuck and three sizes of drill bit guides for accurate fitting of hinges. Contents: 1 x Quick chuck.1 x Drill bit guide 5/64in.1 x Drill bit guide 7/64in.1 x Drill bit guide 9/64in.
Closed Riser Staircase Jig A is constructed from hard wearing solid laminate and includes a reversible fence for exact matching of stairs,Kit includes:-1 x Adjustable reversible clamp.1 x Reversible clamp bar.1 x Sub-base.1 x Nose piece.1 x Line up pin and bush.2 x Spanners.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 50 mmD = 18 mm 45/64 inOL = 92 mm
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 25/64 in 10.0mmC - Cutting Length - 3/4in 19.1mmT.C.T. 2 Flutes.
This Trend 1/4in Router Cutter Set has a range of tungsten carbide tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 25mm.1 x V-Groove: 45° x 12.7mm.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Ogee: R4mm.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 35 mmD = 10 mm 25/64 in
