The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 200mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 180mm.Bore: 30mm.Teeth: 36.Kerf Thickness: 2.5mm.Tooth Config: ATB.
Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank, ensuring that their holding power is enhanced. Applications include partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. For use with N62FN-1, N62FNB-E & N62FNK-2 models. Note: This nail will also fit the N60FN and the N59FNK models. Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. 25° collation angleType - 15 gauge angled finish nail.Finish - Galvanised.Length - 57mm.QTY - Box 3655.
Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank, ensuring that their holding power is enhanced. Applications include partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. For use with N62FN-1, N62FNB-E & N62FNK-2 models. Note: This nail will also fit the N60FN and the N59FNK models. Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. 25° collation angleType - 15 gauge angled finish nail.Finish - Galvanised.Length - 50mm.QTY - Box 3655.
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brush With Shank has the following specification: Wire Type: Steel.Diameter: 50mm.Width: 18-20mm.Shank: 6mm.Wire Gauge: 0.30.Max Speed: 15,000/rpm.
LENOX® Gold® Demolition Reciprocating Saw Blades have an aggressive blade design that optimises the blades cutting angle for faster cutting in a wide variety of materials. The POWER ARC™ curved blade delivers up to 2x longer life vs traditional straight LENOX® Reciprocating Saw Blades. Patented T2™ Technology reduces cutting forces on each tooth and optimises chip removal to allow efficient cutting in the widest range of materials. The teeth feature a titanium coating making them more wear-resistant, keeping them sharper for longer.Pack of 5 LENOX® 960GR Gold® Demolition Reciprocating Saw Blades 230mm 10 TPI
The DEWALT DEWDT2163QZ HSS jigsaw blades are engineered to deliver a quality cut in a variety of ferrous and non-ferrous metals. The blades feature fully hardened high speed steel for increased durability. The blades have a T shank fitting for all T-shank Jigsaws. They are ideal for fast, straight cuts in aluminium 4-15mm; metal & non-ferrous metal 4-6 mm & plastic up to 30mm thick. The DEWALT DEWDT2163QZ has the following specifications:Overall Length: 100mmLength: 72mmTooth Pitch: 3mmMax DOC: 30mmEquivalent Bosch Ref: T127DPack Quantity: 5
This Masterplug 240 Volt cassette cable reel is fitted with safety thermal cut-out to prevent overheating, and safety socket shutters. Manufactured to BS EN 61242.The HBT20RCD version has an RCD (residual current device) plug for added safety. This sensitive safety device will switch off electricity automatically if there is a fault.
The Wiha electric easyTorque Adapter is used for controlled fastening on live parts up to 1,000 V AC, such as circuit breakers. Guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing.These adapters transform slimVario products into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter are seen rotating in opposite directions when the torque is reached.Individual tested as per the international IEC 60900 standards, allowing users to work safely on live parts up to 1,000 V AC. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75mm slimBits. This set contains 5 Adapters in the following sizes: 0.8Nm, 2.0Nm, 2.5 Nm, 2.8 Nm & 4.0Nm.
Chamfer & V Groove Cutters These types of cutter are used for edging and chamfer cutting, on man-made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V grooving. Ball bearing and pin guided cutters enable curved work to be undertaken, bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. A range of valuable self-guiding chamfer/bevel cutters. Bearing follows the board beneath. T.C.T. Shank. = 1/4in D = 32mmC = 12.7mmB = 9.5mm Angle = 45°
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: Standard 1/4 inch. Length: 65mm.
Irwin torx power bits are specially designed for the higher torque requirements of power tools. They are designed to provide more clearance between the power tool and the fastener.Pack of 5 Torx TX20 x 50mm long.
Irwin torx power bits are specially designed for the higher torque requirements of power tools. They are designed to provide more clearance between the power tool and the fastener.Pack of 5 Torx TX30 x 50mm long.
The Lessmann DIY Steel Wire End Brush is fitted with a 6mm shank. Ideal for working in hard-to-reach places such as drilled holes or recesses. For the removal of paint and the cleaning of moulds and castings. Specification: Wire Type: SteelDiameter: 23mmShank: 6mmWire Gauge: 0.30Max. Speed: 12,000/rpm
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, rubber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 100mm.Width: 12mm.Bore: M14.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.
The DEWALT Stationary Construction Circular Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. With ultra-sharp cutting edges and Alternate Top Bevel (ATB) teeth to reduce splinters. The blade features a wedge shoulder to protect the carbide from nail impact. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations, rough timber and cutting through embedded nails.This DEWALT Construction Circular Saw Blade has been designed for cutting rough timber, possibly with embedded nails. Specification: Blade Diameter: 216mmBlade Bore: 30mmTooth Count: 40Plate Thickness: 1.7mmKerf Thickness: 2.6mmGrind Type: ATBNRake Angle: -5°
The DEWALT Corded Extreme Framing Circular Saw Blades have a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Can be used for ripping and cross-cutting natural timbers. Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard. It is NOT recommended for timbers that may contain nails.The DEWALT DT10304QZ Circular Saw Blade has the following specifications: Blade Diameter: 190mm.Bore Size: 30mm.Tooth Count: 24.
