Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Size: No.2 Phillips. Length: 50mm x 1/4-inch hex. Box of 10.
The Wiha Nut Driver & Bit Set, 60 Piece, can be used for installation and mounting work. All of the nut driver inserts are made from high quality chrome vanadium steel with a corrosion-resistant, easy to clean surface. Supplied in an L-BOXX Carry Case. Contains the following: 1 x 1/4in Switchable Ratchet Wrench 128mm. 13 x 1/4in Hexagon Nut Drivers: 4.0, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 11.0, 12.0, 13.0 & 14.0mm. 2 x 1/4in Extensions: 75 & 150mm. 1 x 1/4in Universal Joint with ball Internal square, square head. 1 x 1/2in Switchable Ratchet Wrench 257mm. 17 x 1/2in Double Hex Nut Drivers: 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 21.0, 22.0, 24.0, 27.0, 30.0, 32.0 & 34.0mm. 2 x 1/2in Extensions: 150 & 250mm. 1 x 1/2in Universal Joint with ball Internal square, square head. 1 x SoftFinish Magnetic Bit Holder Screwdriver. 1 x CentroFix Force Mechanically Lockable Magnetic Bit Holder 60mm. 3 x 25mm Standard Slotted Bits: 4.5, 5.5 & 6.5mm. 2 x 25mm Standard Phillips Bits: PH1 & PH2. 3 x 25mm Standard Phillips Bits: PZ1, PZ2 & PZ3. 7 x 25mm Standard TORX Bits: T10, T15, T20, T25, T27, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x 1/4in Tool Shaft with ball Square, Internal hexagon.
The Wiha Nut Driver & Bit Set, 40 Piece, can be used to simply carry out fastenings in a single step. All of the nut driver inserts are made from high quality chrome vanadium steel with a corrosion-resistant, easy to clean surface. Contains the following: 13 x 1/4in Hex Nut Driver Inserts: 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10, 11, 12, 13 & 14mm. 1 x 1/4in Switchable Ratchet Wrench 128mm. 2 x 1/4in Extensions: 75 & 150mm. 1 x 1/4in Universal Joint with Ball Internal Square/Square Head. 3 x 25mm Standard Slotted Bits: 4.5, 5.5 & 6.5mm. 2 x 25mm Standard Phillips Bits: PH1 & PH2. 3 x 25mm Standard Pozidriv Bits: PZ1, PZ2 & PZ3. 7 x 25mm Standard TORX Bits: T10, T15, T20, T25, T27, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x Magnetic CentroFix Force Bit Holder 60mm. 1 x Magnetic SoftFinishScrewdriver with Bit Holder 112mm. 1 x 1/4in Tool Shaft with Ball Square/Internal Hexagon. 1 x Multifunctional Bag with Belt Clip keeps all tools securely arranged. Easily hooks on to work trousers thanks to the high quality clip holder.
IRWIN Impact Pro Performance Pozidriv Screwdriver Bits have been engineered for maximum durability and turning force when used in extreme applications. The full-fit head eliminates wobble and screw head roundings. With a contoured area, so the bit tip flexes with the torque of the impact driver. Flex optimised to transfer maximum torque through the screw and maximise life.Pack of 2 IRWIN Impact Pro Performance Screwdriver Bits PZ1 25mm
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504226 (T101AO) Wood Jigsaw Blades provide curve cuts in plywood, laminated particleboard, hard and soft wood, plastics 2-20mm.
The Metabo KSU 251 Mitre Saw Stand with trolley function gives high mobility on the construction site thanks to the large heavy-duty wheels. Light, robust design with a maximum load of 250kg at the central part. Trolley function for mobile transportation even with the mitre saw mounted. Quickly ready to use thanks to lockable folding legs and adjustment option for safe positioning. Extendable workpiece supports with rollers and folding guide for precise cutting in series. Universal machine carrier (installation without tools) makes it suitable for all common mitre saws of well-known manufacturers. Specification Max Weight Load in Central Part: 250kgOverall Length: 1.27m-2.50mHeight of Workpiece Supports: 92-99cmWeight: 23kg
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28 Collation AngleSKU S31090 Profile PLAIN Finish BRIGHT Description STICK NAIL 3.10-90 PLAIN 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S
The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters. The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops. With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.
This Trend CraftPro Cordless Saw Blade Triple Pack contains: 1 x CSB/16524T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 24T 1 x CSB/16540T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 40T 1 x CSB/16552T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 52T Not for use with Bosch GSK 24.
The Trend Craft Pro Bearing Guided 3° Undercut Router Bit has a shank-mounted bearing guide for routing a leading edge on doors to allow a tight fit against the jamb. Specification: Cut Depth: 50mmOverall Length: 100mmShank: 1/2in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mm D = 9 mm 23/64in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mmD = 6.3 mm 1/4in
The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 165mmBlade Bore: 20mmTooth Count: 24Plate Thickness: 1.0mmKerf Thickness: 1.65mmGrind Type: ATBRake Angle: +24°
The Metabo Starlock HSC Plunge Cut Saw Blade has a convex row of teeth for easy starting and clean cutting results. Provides clean plunge cuts in wood. With a lasered depth scale for precise immersion depths.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504410 (T144DP) Wood Jigsaw Blades provide fast, clean, parallel cuts in hard and soft wood, particle board 6-60mm.
The Irwin Speedhammer Plus Chisels are for use with SDS Plus machines. Can be used on concrete and masonry and have a grey sandblasted professional finish. They are suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit.1 x Irwin Speedhammer Plus Gouge Chisel 22mm Length 250mm
The Irwin Phillips insert screwdriver pozi bits are engineered for use in hand-driving applications or with power tools, designed for use in insert holder with C-clip for retaining ring notch. The bits are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel with a titanium coating.The Irwin IRW10504341 Screwdriver Pozi bits come in a bag of 10 with the following dimensions: PZ1 x 25mm.
The Irwin Professional Aluminium Circular Saw Blade has expansion slots that help keep the blade flat. Triple Chip Ground Tooth (TCG) provide an excellent cut finish. Specially designed for cutting all types of non-ferrous metals such as aluminium, copper, lead and plastics.This IRWIN Professional Aluminium Circular Saw Blade has the following specifications: Blade Diameter: 160mm.Bore: 20mm.Teeth: 56.Kerf Thickness: 2.5mm.Tooth Config: TCG.
The Irwin General Purpose Table & Mitre Saw Blade with construction grade tungsten carbide tips that retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Table & Mitre Saw Blade has the following specifications: Blade Diameter: 315mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 3.2mm.Tooth Config: ATB.Machine: Table & Mitre.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 230mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 200mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
