This Knipex Pipe S-Type Pipe Wrench has the following specifications: Overall Length: 330mm. Clamping Capacity: Pipes 42mm (1.5/8in). The Knipex S-Type Pipe Wrenches offers time-saving, precise adjustment of the gripping width directly onto the workpiece at the push of a button. Less effort is required thanks to the self-locking action. Its gripping jaws feature specially hardened teeth, hardness approx. 56 HRC. Hardened handles allow for maximum load capability and a pinch guard prevents operators' fingers from being pinched. 330mm
The Knipex VDE Electronic Super Knips for ultra fine cutting work, e.g. in electronics and fine mechanics. They have ground, very sharp cutting edges without bevel. Cutting edge hardness approx. 54 HRC. The precisely shaped tips cut wires close to a surface from Ø 0.2mm. Controlled micro cutting edge misalignment provides the most precise cutting of even the thinnest of wires and for a long service life. Fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. A joint with stainless steel rivet allows for extremely smooth movement for minimum operator fatigue. They are also fitted with an opening spring and opening limiter. Specifications: Cutting Capacity: Medium Hard Wire:1.0mm. Overall Length: 125mm. Head Width: 13.5mm. Jaw Length: 9mm. Jaw Thickness (Joint): 7.5mm.
Knipex Diagonal Cutters come with an opening spring. For nearly flush cutting of moulded plastic components from sprues. Fitted with plastic coated handles for added comfort. Specification: Overall Length: 160mm.
These Knipex Bolt Cutters offer a high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. Its forged-in stopper features a comfortable shock-absorber. They offer good access due to very flat construction of head and joint area. Ergonomically angled handles minimise effort. Fitted with sturdy, non-slip two-colour multi-component handle sleeves. There is also an eccentric bolt enabling precise adjustment (12 positions). Bolt cutter head is replaceable if needed. Specifications: Cutting Capacity Ø : @HRC 1913mm, @HRC 4010mm, @HRC 489mm. Overall Length: 910mm. Cutting Edge Length: 46mm. Head Thickness:42mm.
The Knipex Farriers' Pincers have a small head and anvil for redirecting horseshoe-nails. Also suitable for dismantling work in vehicle body workshops. The cutting edges are additionally hardened, approx. 59 HRC.
The Knipex Mechanics' Pliers with cross hatched gripping surfaces for a solid grip. The high strength pliers' tips are ideal for bending items. Fitted with 2 component, soft-grip handles for added comfort during use. Specifications: Overall Length: 200mm. Jaw Thickness (Joint): 9.5mm. Jaw Length: 73mm. Tips Width: 3.0mm. Tips Thickness: 2.5mm. Head Width: 17.5mm.
Knipex Stripping Knife with four blade positions: folded, straight, angled and ratcheting. The ratchet function provides easy cutting, even for a variety of cable sheaths. Cuts very hard or tough plastic sheaths up to 7mm (wall thickness). A guide shoe protects the conductor insulation under the cable sheath. Fitted with an ergonomically designed, comfortable handle. The sickle-shaped, replaceable hook blade can be folded for safe transport. There is also a three-stage blade lock for safe handling and transport. An integrated tether attachment point enables use with KNIPEX Tethered Tool System.
The Knipex WireStripper features multifunctional gripping surfaces for reliable gripping, holding and bending of flat and round material as well as for twisting wires. Innovative cutting edge geometry and powerful cutting edges allow for 50% higher cutting capacity and 25% less cutting effort compared to standard wire strippers. Hybrid tips, flat and wide, on the pliers head provide high stability and good accessibility. Clear-cut outside edges on the jaws make them ideal for working on flush-mounted junction boxes and deburring feed-through holes. They also feature stripping profiles for conductors from 18-10 AWG(solid) and 20-12 AWG (finely stranded) The comfortable opening width and ergonomic handle shape make handling comfortable. There is also an integrated opening spring which makes frequent cutting easier. Ideal for right- and left-handed users, locking device can be operated from either side. Specifications: Stripping Capacities: AWG 1 / 0, Copper Cable, Multiple-stranded Ø 15mm. Stripping Profiles: Conductors 18-10 AWG (solid) and 20-12 AWG (finely stranded). Cutting Capacity: Threaded Rods and Screws of UNC 6-32 and 8-32 up to class 4.6. Length: 200mm.
The Knipex VDE Needle-Nose Combination Pliers provide easy cutting thanks to the high leverage joint. Its gripping surfaces feature a special convex contour on one side for secure gripping of flat parts. The cutting edges are additionally induction-hardened, cutting edge hardness approx. 61 HRC. Milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled. Handy when working in confined areas thanks to slim head design and pointed jaws (anti-twist). Fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. With a narrow head style for use in confined areas. Specifications: Length: 185mm. Cutting Capacity: Hard: 3.0mm, Medium Hard: 3.8mm, Multi-stranded Copper Cable 13mm.
This Knipex Mini Plier Set comes in a high quality polyester pouch with hook-and-loop fastener and belt clip. Contains: 1 x 87 01 150 KNIPEX Cobra High-Tech Water Pump Pliers. With push button for adjustment on the workpiece. It offers fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. The gripping surfaces feature special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Its box-joint design allows for high stability due to double guide. With reliable catching of the hinge bolt: no unintentional shifting. A pinch guard prevents operators' fingers being pinched. Length: 150mm. Capacity: Pipe 36mm Ø, Nuts 32mm. 1 x 08 22 145 KNIPEX Needle-Nose Combination Pliers for all common installation and repair work. Handy size, ideal when working in confined areas thanks to slim head design and pointed jaws (anti-twist).Its grippingsurfaces feature a special convex contour on one side for secure gripping of flat parts. A milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled. They provide easy cutting thanks to the high leverage joint. Its cutting edges have been additionally induction-hardened, cutting edge hardness approx. 61 HRC. Length: 145mm. Cutting Capacity: Hard Wire 2.0mm, Medium Wire 2.0mm, Multi-Stand Copper 8.0mm.
The Knipex Mini Plier Set comes in a high quality polyester pouch with hook-and-loop fastener and belt clip. Contains: 1 x 87 01 150 KNIPEX Cobra High-Tech Water Pump Pliers. With push button for adjustment on the workpiece. It offers fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. The gripping surfaces feature special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Its box-joint design allows for high stability due to double guide. With reliable catching of the hinge bolt: no unintentional shifting. A pinch guard prevents operators' fingers being pinched. Length: 150mm. Capacity: Pipe 36mm Ø, Nuts 32mm. 1 x 74 01 160 KNIPEX High Leverage Diagonal Cutters for very tough, continuous use. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio.Its precision cutting edges are additionally induction-hardened (cutting edge hardness approx. 64 HRC), making them suitable for all sorts of wire including piano wire. Length: 160mm. Cutting Capacity: Hard Wire 3.4mm, Piano Wire: 2.0mm.
The Knipex 8 Piece Circlip Plier Set contains a selection of the most common Circlip Pliers for internal and external circlips. Made from special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. Supplied in sturdy, plastic retail packaging. Also suitable for storage of the pliers. Contains: 1 x 48 11 J1 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 11 J2 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 48 21 J11 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 21 J21 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 49 11 A1 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 11 A2 External Circlip Pliers for Shafts Ø 19-60mm. 1 x 49 21 A11 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 21 A21 External Circlip Pliers for Shafts Ø 19-60mm.
Knipex 8 Piece Circlip Plier Set contains a selection of the most common Circlip Pliers for internal and external circlips. Made from special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. Supplied in a tool roll, made of hard-wearing polyester fabric with practical, adjustable quick release fastener. Contains: 1 x 48 11 J1 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 11 J2 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 48 21 J11 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 21 J21 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 49 11 A1 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 11 A2 External Circlip Pliers for Shafts Ø 19-60mm. 1 x 49 21 A11 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 21 A21 External Circlip Pliers for Shafts Ø 19-60mm.
Knipex Cobra Water Pump Pliers are made from chrome vanadium electric steel, which has been forged and multi-stage oil-hardened for excellent durability. The gripping surfaces have special hardened teeth, with hardness approx. 61 HRC to ensure high wear resistance and stable gripping. A press-button action allows fast and firm adjustment directly on the workpiece. The pliers allow fine adjustment, for optimum adaptation to different sizes of workpiece and are self-locking on pipes and nuts to prevent slipping. Their box joint design provides high stability. A reliable catching of the hinge joint ensures no unintentional shifting. 3 Piece Set supplied in a practical, hard-wearing polyester fabric tool roll protects your tools and the hook-and-loop fastener keeps them within easy reach. Contains the following sizes: 125, 180 and 250mm.
Knipex Pliers Wrench with dipped PVC handles and smooth parallel jaws for cautious installation of plated fittings or sensitive surfaces. More effective, faster and greater capacity than an adjustable spanner of the same size. Highly suitable for gripping, holding, pressing and bending work pieces. Fast adjustment at the touch of a button with the tool on the work piece. Lever ratio greater than 10-1 for strong gripping power. The 3 Piece Set is supplied in a practical, hard-wearing polyester fabric tool roll protects your tools and the hook-and-loop fastener keeps them within easy reach. Contains the following sizes: 125, 180 and 250mm.
The Knipex Cobra Water Pump Pliers are made from chrome vanadium electric steel, which has been forged and multi-stage oil-hardened for excellent durability. The gripping surfaces have special hardened teeth, with hardness approx. 61 HRC to ensure high wear resistance and stable gripping. A press-button action allows fast and firm adjustment directly on the workpiece. The pliers allow fine adjustment, for optimum adaptation to different sizes of workpiece and are self-locking on pipes and nuts to prevent slipping. Their box joint design provides high stability. A reliable catching of the hinge joint ensures no unintentional shifting. Five Piece Set supplied in a practical, hard-wearing polyester fabric tool roll protects your tools and the hook-and-loop fastener keeps them within easy reach. Contains the following sizes: 125, 150, 180, 250 and 300mm.
The Knipex Pliers Wrench with a grey atramentized finish and dipped PVC handles. Smooth jaws for damage free installation of plated fittings, ideal when working directly on chrome. With scaling for presetting the width apart from the workpiece. Highly suitable for gripping, holding, pressing and bending workpieces. Fast adjustment at the touch of a button with the tool on the workpiece. Lever ratio greater than 10-1 for strong gripping power. Replaces the need for sets of metric and imperial spanners. Five Piece Set supplied in a practical, hard-wearing polyester fabric tool roll protects your tools and the hook-and-loop fastener keeps them within easy reach. Contains the following sizes: 125, 150, 180, 250 and 300mm.
The ITL Insulated Wave Form Holding Tool lis made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL 12 Piece Insulated 3/8in Drive Socket Set. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 10 x Metric Sockets: 8, 9, 10, 11, 13, 17, 18, 19, 20, 22mm. 1 x 3/8in Reversible Ratchet. 1 x Extension Bar 127mm (5in).
ITL 12 Piece Insulated 1/2in Drive Socket Set. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 10 x Metric Sockets: 8, 10, 13, 14, 15, 16, 17, 18, 19, and 21mm. 1 x 1/2in Reversible Ratchet. 1 x Extension Bar 127mm (5in).
The ITL 12 Piece Insulated 3/8in Drive Socket Set. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 6 x Metric Sockets: 8, 10, 13, 17, 19 and 20mm. 4 x Imperial Sockets: 3/8, 1/2, 3/4 and 7/8in AF. 1 x 3/8in Reversible Ratchet. 1 x Extension Bar 127mm (5in).
This ITL 24 Piece Insulated 1/4in Drive Socket Set. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 10 x Metric Sockets: 4, 5.5, 6, 7, 8, 9, 10, 11, 13, and 14mm. 1 x 1/4in Reversible Ratchet. 1 x Extension Bar 150mm (6in). 12 x Bit Adapter and Bits.
The ITL Insulated Armour Saw. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
1 x ITL Insulated Podger Ratchet 17 x 19mm. The ITL Insulated Podger Ratchet made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. 17 x 19mm
