The Norbar Torque Screwdriver provides easy torque adjustment without the need of additional specialist tools. Fitted with a comfortable, durable handle. The handle is constructed using 2 materials; a base material for strength, overlaid with a soft feel grip for comfort and slip resistance. The screwdriver 'slips' when torque is achieved removing the possibility of over-tightening. It also features a lock to prevent accidental adjustment of set torque. Accuracy exceeds the requirements of ISO6789. Traceable calibration certificate for the clockwise direction supplied with all adjustable tools (not 'P' Types). Supplied with a 1/4in hexagon bit holder designed using a 4mm hexagon stem. Specification: Operates Between 1.2-6.0NmAccuracy: ±6%Handle Length: 155mmWeight: 0.235kg
The Norbar TTi Wrenches are accurate upto ±3%, which exceeds all international standards for torque wrenches. Every wrench comes with a traceable calibration certificate. Quick and light adjustment over the entire scale can be quickly achieved with minimal effort in approximately 10 complete turns (exact number varies by model) and they have a micrometer scale for simple and error free setting. All models have an adjustment lock to prevent accidental adjustment of the set torque. The ratchets have a narrow engagement angle of 5º on the TTi50 and 6º on all other models, allowing easy positioning of the tool in the tight confines of today’s vehicles and machines. They also have a comfortable, durable handle that is constructed using 2 materials: a base material for strength overlaid with a soft feel grip for comfort and slip resistance. The handle and lens resist chemicals in common usage in the automotive, aviation and industrial environments.TTi 20 Torque Wrench 3/8in Square Drive 4-20Nm specification detailed below.
The Norbar NorTorque® Tethered Torque Wrenches are accurate up to ± 3%. They feature a built-in tethering point to secure the tool for safe work at height and a double-sided locking plunger square. Built on a trusted, versatile torque wrench design with a micrometer scale for simple and error free setting. The handle and lens materials are resistant to commonly used industrial chemicals. The lock feature helps to prevent accidental adjustment of the set torque. Pinned head in line with DROPS recommendation for ultra-safe handling of sockets when working at height. Supplied with a Declaration of Conformance, which meets the requirements of ISO 6789-1:2017This Norbar NorTorque® Tethered Torque Wrench has the following specification: Drive: 1/2in SquareRange: 60-300Nm (45-220 lbf.ft)Accuracy: ± 3%Ratchet Diameter: 46mm Weight: 1.5kg
The Norbar NorTorque® Tethered Torque Wrenches are accurate up to ± 3%. They feature a built-in tethering point to secure the tool for safe work at height and a double-sided locking plunger square. Built on a trusted, versatile torque wrench design with a micrometer scale for simple and error free setting. The handle and lens materials are resistant to commonly used industrial chemicals. The lock feature helps to prevent accidental adjustment of the set torque. Pinned head in line with DROPS recommendation for ultra-safe handling of sockets when working at height. Supplied with a Declaration of Conformance, which meets the requirements of ISO 6789-1:2017This Norbar NorTorque® Tethered Torque Wrench has the following specification: Drive: 1/2in SquareRange: 20-100Nm (20-80 lbf.ft)Accuracy: ± 3%Ratchet Diameter: 38mm Weight: 0.9kg
The Norbar SL0 Fixed Head Torque Wrench is accurate to ±3% and features a high-quality 72 tooth ratchet, for use in confined spaces. Fitted with a push through square for left and right handed torque tightening. It's easy to set the torque, an unmistakable signal is given off when set torque is reached. The moulded grip aids correct hand location and operator comfort. Accuracy exceeds all international standards. Traceable calibration certificate supplied to satisfy ISO9000:2000 quality systems.This Norbar SL0 Fixed Head Torque Wrench has the following specification: Drive: 3/8in SquareRange: 4-20Nm (40-180 lbf.in)Torque Radius: 144mmRatchet Teeth: 72Ratchet Type: ReversibleLength: 220mmWeight: 0.4kg
Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 100mm (4in)Cut half round smooth Flat Side: Double CutHalf-Round: Single CutTanged
Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut hand bastardTanged
Metabo 200 Watt FMS-200 Intec Palm Tri Sander is a small lightweight machine perfect for one-handed use. It has the Intec dust filter unit to help aid dust containment. It has a very good power to weight ratio making it perfect for getting the job done quickly and professionally in those tight, awkward places. Carry case included. Specification Input Power: 200WOscillating Speed: 26,000/min.Oscillating Diameter: 1.4mmBase Plate: 100 x 147mmWeight: 1.25kg
Monument Master Plunger for removing blockages from pipes by building up pressure. With patented bellows to give more displacement than traditional force cups. Easily cleaned and has a removable handle.This mini plunger is ideal for hand basins. Size: 100mm (4 in).
The Monument Landlord / Homeowner Gas Safety Record Pad contains 50 documents per pad. With high quality stitched binding and triplicate documents. Supplied with Eurohanging hook in display bag, ideal for merchants.
Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 507P Spare Flat Tap Reseater Cutter 25mm (1in)
Monument drain auger with a hollow spring 1/4in diameter wire cable with a bulbous head for unblocking sinks, urinals and small drains etc. The rotating crank handle with thumbscrew fits over and locks the cable. Can be entered through strainers.Can also be used without the handle as a refill for the MON3313. Length: 7.5m (25ft) long retractable.Diameter: 6mm (1/4 in).
Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.
The Monument MON2059 2059M multi purpose four way key for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, central heating pump cocks, some radiator valves and drain off valves.
Monument Radiator Spanner Air Release Key made from steel, zinc plated valve spanner and air release key with a slightly offset handle. Size: 12mm (Double Ended).
The Monument MON2050 2050L Gas Meter & Radiator Bleed Key for releasing the air which can appear in a radiator and for opening gas meter cupboards.Made in Britain from engineering plastic.
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.Monument 1712t Autocut Copper Pipe Cutter. Size: 12mm.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in).Capable of sealing against pressures of up to 1.97 bar / 29 psi.
The Wonder Mitre is a mitre guide that has been designed to handle the convex surface of coving. It has specially shaped notches that grip the coving, holding it fast. Providing the walls are square, very little finishing will be required. Suitable for coving up to 127mm (5in). Trade (Steel).
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 24 x 26mmLength 125mm (5 in)
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 16 x 17mmLength 125mm (5 in)
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in a case.The 1966M/50 Traditional External Micrometer has the following specification: Micrometer Range: 25-50mm.Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.01mm.
The Moore & Wright DPC Series Digital Caliper has a Polycarbonate frame and offers 4 way measurement (mm/inch, absolute/incremental measurement) with an accuracy of ± 0.2mm/0.008in. The caliper can be zeroed at any point on the scale. Supplied with a CR2032 battery and a vinyl pouch. Specification Range: 0-150mm (0-6in).Resolution: 0.01mm (0.005in).Jaws: 40mm.
A flat cutter for wire with hardened steel plate jaws.The handles are zinc plated and are fitted with a return spring. Used for cutting soft wire.Unsleeved.
The Lufkin Unilok Pocket Tape has a yellow clad abrasion resistant blade with 2 colour, easy to read markings in metric and imperial graduations. With a self-adjusting end hook. It has a lightweight high strength case with removable belt clip and a toggle lock that holds the blade securely at any length. Built-in shock absorber cushions blade return.This Lufkin YU835CME Unilok Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class II
The Lessmann Brake Caliper Brush, manufactured for the automobile industry and used for the cleaning of clogged lining deposits when changing brake pad linings. The brush is thin with two rows of straight wire filling and is manufactured this way to prevent damage to sensitive brake areas during use. Available in Steel or Brass. Length: 225mm (9in). 182.401: Straight Steel, Gauge: 0.35.182.451: Crimped Brass, Gauge: 0.25.The Lessmann Brake Caliper Brush has the following specification: Type: Steel Straight, Gauge: 0.35.Length: 225mm (9in).
The Lessmann Steel File Cleaning Brush is ideal for for cleaning wood and metal files. The file card is glued to the wooden body. Length: 250mm.Filling Surface: 115 x 38mm.
The Knipex 70 01 series of diagonal cutters are constructed from chrome vanadium solid style forged top quality steel with precision non slip tips for added strength and durability. They combine high quality material and precise workmanship for long service life. The induction-hardened precision cutting edges offer clean cutting at the cutting edge tips. These pliers are suitable for cutting thin copper wires. The narrow head style is ideal for use in confined areas. Like most of the Knipex range of pliers all components of these cutters have oil hardened edges and they are made from Vanadium electric steel forged to approximately 62 HRc. They are ideal for cutting soft wire close to a flat surface with the bevelled blade. The cutters have polished head and plastic PVC dipped coated cushion grip handles for added durability and comfort. Knipex 70 01 series of diagonal cutters are ideal for all trade or DIY applications and especially for the electrical trade. These Knipex diagonal cutters come in 125, 140, 160, and 180mm versions for all types of work applications. High quality material and precise workmanship for long service life.160mm (6 1/4 in)
The Knipex 03 01 series traditional combination pliers are equipped with hardened cutting edges for hard or soft wire up to 2.5mm diameter. The pliers have all the signs of Knipex technology and quality. The oil hardened and tempered construction will give these pliers a longer working life. Knipex 03 01 series combination pliers have separately induction hardened cutting edges that are hardened to approximately 60HRc. They have polished heads and PVC dipped handles. These Knipex pliers have gripping zones for flat and round material. This gives the pliers added grip and makes them ideal for home use, DIY or trade applications. They come in 160, 180 and 200mm versions.These Knipex Combination Pliers ;have the following specification: Length: 160mm (6.1/4in).Cutting Capacity: Hard: 2.0mm, Medium Hard: 3.1mm, Multi-Strand: 9.0mm.
The IRWIN Jack 880UN Universal Toolbox Saw has all the features and benefits of a standard Jack 880, with the convenience of a 14in 'short' blade. The saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing four times the added protection than conventional anti-rust agents. The handle has integrated 90° and 45° angles to aid the user when marking out. Blade Length: 350mm (14 inch).Teeth: 8 tpi.
The Irwin carbide tipped mortar rake cutters are ideal for the fast and efficient removal of mortar and cement joints in brickwork repointing applications and for chasing out channels for the installation of cable, pipes and switchboxes. They can be used with the Irwin mortar raker sole plate and small angle grinders.The Irwin IRW10507230 Mortar Rakes (2 pieces) 3 cutter have the following dimensions:Size 10.0 x 20/40mm
