This Teng Tools torque wrench is manufactured according to DIN 3122 standards. With a ratchet head, the torque wrench can be used for both tightening and final checking of the torque. The wrench is equipped with an angular gauge for after tightening. It is graduated in both Nm and ft.lb, and has a degree scale for after tightening of cylinder heads. The ratchet head has a satin finish and for comfort and excellent grip, the wrench has a rubber handle. Accuracy: ± 4%.Drive: 1/2in square drive.The TEN1292AGEP has the following specifications: Range Nm: 40 to 200. Range ft.lb: 30 to 150. Scale: 1.0Nm/ 1.0ft.lbLength: 465mm.
The Stahlwille 1/2in drive Quick Release Fine Tooth Ratchet has a quick release safety lock and 2 component handle. It has an 80-tooth, reversible ratcheting mechanism, providing a working arc of 4.5° for fine adjustment. Manufactured to DIN 3122/ISO 3315. MADE IN GERMANY.
The Stahlwille 3/8in drive Quick Release Fine Tooth Ratchet has a quick release safety lock and 2 component handle. It has an 80-tooth, reversible ratcheting mechanism, providing a working arc of 4.5° for fine adjustment. Manufactured to DIN 3122/ISO 3315. MADE IN GERMANY.
Stabila 70-M Series levels are traditional, light alloy box section levels with smooth sides and electrostatic powder coating. They are similar to the 70 series, but with additional super-powerful rare earth magnets in the measuring surface. With five times the holding power of ferrite magnets, this level will securely grip onto metal posts and beams without slipping. Ideal for household DIY and professional use, especially wet trades due to the ease of cleaning the level profile. 2 Vials: 1 plumb and 1 horizontal.Measurement accuracy: 0.029° = 0.5mm/m.Size: 60cm (24in).
Stanley FatMax® Chalk Powder is specially formulated for good adhesion and high visibility. Its weather resistant formula will not fade or bleed in a wet environment. It also prevents chalk from clumping inside the chalk reel, meaning it can still be used if soaked with water. Suitable for both interior and exterior use. It is specifically packaged in a square bottle which is designed to not roll off work surfaces.1 x Stanley FatMax® Chalk Refill Black 225g
High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. 1 x Stanley Yellow Aviation Snip Straight Cut 250mm (10in)1 x Holster
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Supplied in a handy carry case. Contents: Parallel: 2.5 x 50mm, 3.0 x 100mm, 4.0 x 100mm, 4.0 x 150mm, 5.5 x 150mm, 6.5 x 30mm (stubby). Flared: 4.0 x 100mm, 5.5 x 100mm, 8.0 x 150mm. Phillips: PH00 x 50mm, PH0 x 75mm, PH1 x 30mm, PH1 X 100mm, PH2 x 125mm, PH3 x 150mm. Pozidriv: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 30mm, PZ2 x 125 mm, PZ3 x 150mm.
The Stanley FatMax® Pro Pocket Tape has a Mylar® coated steel blade with large markings and BladeArmor® coating on the first 150mm for extended blade life. This coating makes it 10 times more impervious to damage from wear and tear than your average lacquer coated blade. The 32mm wide blade, offers a stand-out of 4m. The exceptionally tough bi-material case has incorporated cushion grip areas that provide sturdy, slip-resistant hold. Fitted with a 3-rivet, corrosion resistant, Tru-zero hook that is 150% larger than traditional end hooks. Its shape enables overhead, to the side, as well as the more regular type of measurements. Available with metric only or metric and imperial graduations.This Stanley FatMax® Pro Pocket Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 32mmAccuracy: EC Class II
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Blade Fine Cut 140mm (5.1/2in)
The Stanley Surform® Plane is for use on all types of wood, aluminium, copper, plastic and laminates. It has a polypropylene handle and die-cast body for strength and durability and is fitted with a standard cut 250mm (10in) blade. Overall Length: 315mm (12in).
The Stanley Surform® Flat File is for use on all types of wood, aluminium, plastics, copper and laminates. It has a strong metal body with a removable polypropylene handle. There is a knurled thumb grip at the other end of the body to give more control during use. Supplied with a 250mm (10in) blade. Overall Length: 440mm (17in).
The Stanley Moulded Body Surform® Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools. Overall Length: 155mm (6in).
The Stanley Tools 1992 Blades have 2 cutting positions. They are ideal for a variety of heavy-duty and general-purpose applications. The blades fit all Stanley knives. Made from carbon steel, hardened and tempered for long service life. 50 blades supplied in a secure plastic dispenser. Specification: Blade Thickness: 0.6mmBlade Size: 60mmWidth: 18mm
The Stanley STHT2-28042 Mixing Paddle is a hexagonal rod that will fit a standard drill and is perfect for mixing compound, paint and other materials. The mixer has wings and a protective extension so they do not come in to contact with the bucket. Specification Length: 400mm.Diameter: 80mm.Maximum Capacity: 10kg.Minimum Capacity: 5kg.
The Stanley FatMax® Tenon Back saws have the following features:Reinforced back for extra rigidity makes a straighter cut; Handle screwed to blade for extra strength;Finger rest - ergonomic design, useful for extra control when starting a cut;Triple edged teeth cut on both push and pull strokes for ease of cutting;Induction hardened teeth; 45° and 90° angle quick reference points;Bi-material handle for improved grip and comfort.The Stanley 2-17-199 FatMax® Tenon / Back saw has triple edged induction hardened teeth with a durable bi-material handle for grip. It cuts on both the push & pull stroke meaning it cuts even quicker, the handle has built in 45° and 90° angle quick reference points and has the following specifications: Length 300mm (12in)Teeth 11tpi
The MaxSteel heavy-duty bench vice is made from cast iron for strength and durability. The base bolts directly to the workbench surface for stability, and swivels and locks for versatility. Roll-formed screw threads ensure smooth operation and durability. Chrome plated hardware resists corrosion.Size: 100mm (4 in).
This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight 1360g (3 lb)
This FatMax® Brick Hammer has been designed with one-piece forged construction for strength and durability and the patented Anti-Vibe technology which reduces vibration transmitted to wrist and elbow. It is ideal for cutting brick, masonry tile and concrete block. The blade has a hardened cutting edge designed to score materials before striking for an even cut.
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
The Stanley FatMax® Antivibe All Steel Curved Claw Hammer has a one-piece forged construction for durability and balance. With an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 450g (16oz).
Quick drying water and oil resistant ink which marks on almost any surface.Container with 72 pens.In a variety of colours for different applications (black, red, green and blue).
Stanley FatMax® I-Beam Level has solid-block vials to provide an accuracy of 1.0mm/m in eight orientations. Plus every FatMax level comes with a lifetime accuracy warranty. It is 2 x stronger than other Stanley levels thanks to its unique reinforced box-beam construction. Lightweight body and rule scale for ease of marking out, also a handgrip make handling easy and the precision engineered, dual-machined levelling surfaces ensure maximum accuracy. The 3 vials are magnified for improved all round visibility with shock absorbing end caps protect the level even if it's dropped.Length 1200mm (48 in)
Stanley FatMax® I-Beam Level has solid-block vials to provide an accuracy of 1.0mm/m in eight orientations. Plus every FatMax level comes with a lifetime accuracy warranty. It is 2 x stronger than other Stanley levels thanks to its unique reinforced box-beam construction. Lightweight body and rule scale for ease of marking out, also a handgrip make handling easy and the precision engineered, dual-machined levelling surfaces ensure maximum accuracy. The 3 vials are magnified for improved all round visibility with shock absorbing end caps protect the level even if it's dropped.Length 600mm (24 in)
The Stanley 601 series are disposable craft knife, these are ideal for precision work on card, plastic, and for many craft applications. The tapered plastic body allows precision blade control, and the blades are protected by a plastic guard to ensure safety and a longer life. When the life of the knife has been reached you simply dispose of the knife in the correct re-cycling system, as the blades are moulded to the handle are not replaceable.Box of 50
The Stanley Light-Duty Corner Clamp has independently adjustable jaws which can hold material of equal or varying thickness at right angles. Mounting holes allow the clamp to be securely attached to the work surfaces. It has a cast aluminium construction for long lasting durability. Specification Throat Depth: 15mm.Clamping Capacity: 75mm.Weight: 275g.
This MaxSteel G clamp has an advanced frame design to resist flexing and bending, and has a high-visibility corrosion resistant finish.Made from a heavy-duty malleable iron and steel construction, it also has roll-formed screw threads to ensure smooth operation and durability.Oversized T-handle for extra torque.Size 75mm (3in)
The Stanley Tools ControlGrip™ Combination Pliers are made from forged carbon steel with an induction hardened blade and tempered jaws for long life. Precision milled cutting edges and pivot for smooth opening and closing of the jaws. All exposed steel surfaces have been sanded and are protected against corrosion. With a bi-material, ergonomically designed handle that is easy to hold, even with oily hands. The zone configuration provides added power, comfort and control.1 x Stanley Tools ControlGrip™ Combination Plier 150mm (6in).
The Stanley 0-70-447 adjustable pipe cutter cuts 3-22mm pipe and has the following features:Adjustable to cover a range of pipe sizesDurable metal constructionSteel guide rollers for accuracyReplacement cutter wheel in handle
The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - PozidrivTip Size PZ.1Blade Length 100mm (4 in)
The Stanley FatMax® Phillips tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type PhillipsTip Size PH.4Blade Length 200mm (8 in)
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Flared Tip Size 4.0mmBlade Length 100mm (4 in)
The Stanley FatMax® Stubby Ratchet Screwdriver is ideal for use in small, confined spaces. It has a large soft-grip handle that fits in the palm for comfortable use and it has a 3-position ratchet to allow right, left and fixed positions. The screwdriver has a fine 40 tooth ratchet, offering very high torque. It features inbuilt bit storage.
