The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI3590 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: RedPart No: 3590Dilution Rates Litres: 12-15,000
The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI3589 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: GreenPart No: 3589Dilution Rates Litres: 15-20,000
The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI1992 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: BluePart No: 1992Dilution Rates Litres: 12-14,000
Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 150mm (6 in)
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 4 (dead smooth).Type: round needle file.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 100mm (4in)Cut: hand smooth.Tanged.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 100mm (4in)Cut: flat second.Tanged.
Bahco Flat files do the same jobs as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 100mm (4in)Cut: flat bastard.Tanged.
Bahco spare part kits for the adjustable wrench 80 and 90 Series, this set contains roll, pin and a spring. They are left-hand screw. Finish: Phosphated.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 4mm.
The BlueSpot Tools Combination Pliers are manufactured from drop-forged micro plated steel for increased durability. They have soft grip, vinyl handles that incorporate a slip guard for increased comfort.
The BlueSpot Circlip Pliers with 4 interchangeable jaws for internal and external clips.Includes 2 straight, 90° and 45° jaws. Made from A3 steel with coated handles. Size: 160mm
The Black & Decker KA280K 4-in-1 Multi Sander is ideal for all types of wood based sanding. It has an easy-to-use reversible plate which allows the tool to get into awkward corners for easier sanding. The on-board dust extraction for a cleaner and safer working environment. Uses a quick fit paper attachment system, allowing the user to change the sanding sheet quickly and easily, so as not to prolong the job. The 17cm pointed base plate size gets into the tightest of corners. An autoselect dial ensures that the user has selected the correct speed in conjuction with the correct base, ensuring optimum performance. The tool-free base makes changing between orbital and random orbital sanding bases quick and easy. Supplied with: 1 x Iron Shaped Orbital Base, 1 x 125mm Random Orbital Base, 1 x Detail Finger Sanding Attachment, 1 x Profile/Contour Carrier, 3 x Contour Profiles, 12 x Sanding Sheets, 1 x Cleaning Sheet (Red) for Wood / Metal, 1 x High Gloss Finish Sheet (Grey) and 1 x Carry Case. Specification Input Power: 220WOscillating Speed: 8,500/11,500/minOscillating Diameter: 2mmEccentricity: 1mmPlate Size: Pointed 100 x 165mm, Round: 125mmCable Length: 3mWeight: 1.3kg
The Advent ASR Precision Steel Rule is made from stainless steel with permanent etched graduations. One side of the rule has metric markings and the other side has imperial markings. EC Class 1 Accurate.Advent ASR 300 Precision Steel Rule has the following specification: Length: 300mm / 12in
The Weicon Flat and Round Cable Stripper can be used to strip all common flat and round cables quickly, precisely and safely. Designed for flat cables up to a width of 18mm and for round cables up to a diameter of 13mm. Thanks to the guide at the head of the tool, longitudinal cuts are very easy to perform, especially for longer sections. The longitudinal cuts can be made on both flat and round cables.Below the cable guide is a rotatable inner blade. As with all WEICON TOOLS cable strippers, the blades can be used to make both circular and longitudinal cuts on round cables (from 6 to 13 mm) in a single step. With a lockable adjusting screw, the depth of the blade can be comfortably and precisely set in steps of 0.1 mm up to 3 mm. This prevents damage to deeper layers.Two more blades have been added to the base of this handy tool. These are used for parallel cutting of the outer sheath or insulation. This means the outer sheath can be easily removed even in very narrow spaces, such as in junction boxes or cable ducts. The special design allows the stripping of longer sections at both the head and base of the tool.An additional stripping function has been integrated in the lower side of the housing. This can be used to strip all common flexible and solid conductors with a cross-section between 0.5 and 6 square millimetres.
Weicon No.5 Solar Pro Automatic Wire Stripper for the stripping and skinning of all common cables in the solar sector, such as H1Z2Z2-K from 1.5- 10mm². The wire stripper automatically adjusts to the required conductor cross-section, so no manual adjustment is necessary. Additionally hardened blades easily remove multi-layer rubberised insulation.The adjustable length stop, 5- 25mm, ensures excellent precision and accuracy. If required, it can be removed. The integrated side cutter is suitable for copper and aluminium conductors, up to a diameter of 3mm. Thanks to its slim design, the wire stripper can also be used in areas difficult to access, such as on solar modules or on the inverter.Fitted with a non-slip multi-component handle. It has an eyelet to attach a strap for fall protection, and it has a labelling area where the tool can be personalised. In addition, the wire stripper has a locking mechanism for space-saving storage.As with all strippers in the No. 5 product line, the galvanised blades can be replaced.
Weicon Mini Solar Stripper for the stripping and skinning of common photovoltaic cables (such as H1Z2Z2-K) with a cross-section of 4.0 and 6.0mm². Adjusting the cutting depth manually is not necessary. It has an integrated length stop (6-28mm) for increased precision. In addition, the glass-fibre reinforced tool has an easily accessible side cutter for cables up to 10mm². When using the stripper, a precise cutting pattern is created during stripping. In addition, the Mini-Solar 4/6 mm² can be locked for space-saving storage.Specifications: Application Area: 4/6mm² (12/10 AWG). Length: 125mm.
The Weicon Pro No.5 Wire Stripper can be used for stripping all common stranded and solid conductors from 0.2-16mm². An adjustable length stop from 5-25mm enables very precise and accurate working. The length stop can be removed, if required. The wire stripper automatically manages to adjusts to the required conductor cross-section, so no manual adjustment is necessary. The integrated side cutter is suitable for conductors made of copper and aluminium up to a diameter of 3mm. Fitted with an ergonomically designed anti-slip multi-component handle. Thanks to slim design of the tool, the stripper can also be used in working areas difficult to access, such as in switch cabinets. Other features include a locking mechanism for space-saving storage, an eyelet to attach a strap for fall protection and a labelling surface to be able to individualise the tool.
Weicon Precision S Stripper for fast and safe stripping of very fine conductors, strands or wires with small diameters 0.12-0.8mm (3620 AWG). With the adjustable scaled length stop for the working range from 5-45mm, the desired stripping length can be set quickly and reliably. Two durable, precisely adjusted torsion springs, which push symmetrically on the pair of blades with a defined force, ensure comfortable working. That way, the respective insulation is cut with the right pressure. In combination with the scanning system it is integrated in the tool, this ensures damage-free stripping. The tool is suitable for both right- and left-handed users. Approval / certificate Safety tested by TUV NORD. Specification: Cable Type: Fine-stranded Conductors and Strands, PVC, PTFE/Teflon. Application Area: 0.12 - 0.8mm Ø (36 - 20 AWG). Length: 112mm.
The Weicon No.1 F Plus Coax Stripper enables fast and easy stripping of all coax cables in just one single step. Due to the two pairs of blades facing each other, the stripping process can be carried out quickly and in a space-saving manner by means of multiple, light rotary movements. The preset set down dimension is suitable for common F-screw connectors (6 / 4mm). If required, the blade inserts can be changed and thus other dimensions, e.g. for compression connectors (6.5/6.5mm).Blade inserts with other dimensions are optionally available and can be conveniently exchanged using the ‘click system’. The tool is suitable for e.g. TV aerial cables from 6 - 8 mm. The gripping jaws can be used to screw the F-screw connectors onto the already stripped cable. The integrated open hexagon with 11mm width across flats (SW 11mm) enables space-saving assembly or disassembly of F-connectors during subsequent connection. Particularly in narrow places, the hexagon allows very good accessibility and can be operated without further preparation. A locking mechanism guarantees safe storage of the tool. Approval/ certificate Safety tested by TUV NORD.Specifications: Cable Type: Coaxial Cables, Resp. Antenna and Transmission Cables. Application Area Outer Diameter: 6-8mm for F-screw connectors. Length: 125mm.
The Weicon No.10 Cat Cable Stripper ensures safe and comfortable stripping of all common data and network cables with a diameter of 4.5-10 mm (e.g. Cat5, Cat6, Cat7, twisted-pair cables). The cutting depth does not need to be adjusted manually. Its ergonomic handle shape allows for easy handling of the tool. Its distinctive handle makes them comfortable to use and prevents the hand from slipping, which makes daily work easier and safer. The rounded and space-saving tool head adjusts perfectly to modern socket shapes.Its oblong shape allows better accessibility in deeper cavity wall boxes and in other spaces difficult to access. The design of the blades prevents the electrogalvanized knives from clogging with coating remains. The integrated length stop can be adjusted to the required sheath opening of network outlets and other plugs (3 - 10cm), which makes further processing easier. An interlock guarantees safe storage of the tool. Approval / certificate safety tested by TUV NORD. Specifications: Cable Type: Cat5, Cat6, Cat7, Twisted-pair Cable. Application Area Outer Diameter: 4.5- 10mm. Length: 140mm.
The Weicon No.16 Quadro Stripper covers 4 functions in 1 tool: round cut, longitudinal cut, stripping and cutting. This saves money and space in the tool case. Suitable for stripping of all common round cables from 8-13mm Ø, hook blade and stripping range are integrated. The retractable hook blade can be locked in any position and is easy to change. It also offers fast and easy longitudinal cutting due to optimised cable routing in the housing. The cutting depth does not need to be manually adjusted. All common flexible and solid conductors with a cross-section of 0.5-6mm² can be processed in the integrated stripping area. Cables can also be stripped flush with the tool in hard-to-reach places or in junction and distribution boxes. Fitted with an ergonomic handle which makes the tool safe and easy to handle.
