The ITL 29 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a case, contains: 7 x Metric Spanners : 10, 11, 12, 13, 14, 17, 19mm. 7 x 1/2in Drive Metric Sockets: 10, 11, 12, 13, 14, 17, 19mm. 1 x 1/2in Reversible Ratchet. 2 x 1/2in Extension Bars: 125, 250mm. 1 x Coring Knife. 2 x 8in Pliers : Combination, Snipe Nose. 1 x 6in Diasgonal Cutting Pliers. 2 x 1/2in Drive Hex Key Sockets: 5, 6mm. 2 x Terminal / Slotted Screwdrivers: 3 x 75mm, 4 x 75mm. 2 x Slotted Screwdrivers 5 x 150mm, 8 x 150mm. 2 x Pozidriv Screwdrivers: PZ1 x 75mm, PZ2 x 100mm.
ITL 9 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a tool roll, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Cable Cutters 200mm (8in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Phillips Screwdrivers: PH1 x 75mm, PH2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm.
The ITL 20 Piece Insulated Deluxe Tool Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Diagonal Cutters 150mm (6in). 1 x Cable Cutters 200mm (8in). 1 x Groove Joint Pliers 250mm (10in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Pozidrive Screwdrivers: PZ1 x 75mm, PZ2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm. 4 x Open Ended Spanners: 13, 17, 19, 24mm. 3 x Offset Ring Spanners: 13, 17, 19mm. 1 x Coring Knife.
Hultafors Permanent Markers will adhere to almost any material. Alcohol-based ink, with a round tip allowing for precision marking. Made in Sweden with environmentally friendly materials . This set includes four colours: blue, red, green and black, for high readability regardless of the colour of the surface.
The Hultafors Stainless Steel Brick-Mate Tape has a unique blade design with three scales to calculate brick and block quantities and course heights, along with a conventional metric scale accurate to EC Class I. The blade is made from durable stainless-steel tape and fitted with a strong stainless-steel end-hook with a reinforcement plate. The ergonomic ABS case has a non-slip rubber grip pad and easy-to-operate positive action lock, minimising blade slip. With a bump stop for added blade and end-hook protection, and a metal clip for attaching a lanyard when working at heights. Made in Britain. Accuracy: EC Class I.
The Hultafors Wooden Folding Rule is traditionally manufactured from downy birch with Swedish steel joints for thin sections and great flexibility. A metric scale in black appears on both sides, and red decimetre figures. Type approved as per EU Class III. Coated with a water-based protective lacquer for increased resistance to dirt and moisture. The joints are heat-treated, coated and oiled at three points to ensure first-class performance. Each folding rule section is checked twice during the production process using high-speed cameras. A Hultafors classic – a must for every craftsman.
The Fiskars Functional Form ReNew Universal Scissors are made from recycled materials (minimum 70%) for unique comfort and cutting performance. Its durable, recycled (~80%) stainless steel blades are precision ground for long-lasting sharpness. The ergonomically designed handle is made from a mix of recycled (~80%) plastic (80%) and fiberglass (20%). Ideal for a wide variety of tasks around-the-home. Can be washed in a dishwasher. Made in our factory in Finland with an environmental protection certificate. Completed and tested by hand. Supplied in plastic-free packaging can be easily recycled. Specification: Length: 21cm.
1 x Faithfull FSC Straight Gouge Carving Chisel 9.5mm (3/8in). The Faithfull Straight Gouge Carving Chisel comes with wooden handle, deep seated tang, brass ferrule and fully polished blade. Gouges are designed with a concave blade to remove wood without causing splintering. The depth of the curve or sweep determines the depth-of-cut. This product is made with FSC 100% Certified Wood from well-managed forests.Please Note: Woodcarving chisels will require final sharpening prior to their first use. 9.5mm (3/8in)
Faithfull Plasterers Orange Jointing Tapefor covering plasterboard joints and repairing cracks prior to plastering.It uses a high-tac adhesive. Ideal for plastering and patching. Performs from -10°C to 70°C.
The 8 Piece Faithfull Box Spanner Set.Includes 16 of the most popular sizes used by both tradesmen and home users and is ideal for use on recessed, deep set or otherwise hard-to-reach nuts and bolts.Each spanner is manufactured from durable steel piping and is plated with a bright coating to protect against corrosion. Great for a range of automotive repair jobs and plumbing maintenance work. This set is supplied in adurable nylon storage roll. Contains: 1 x 6mm and 7mm Box Spanner. 1 x 8mm and 9mm Box Spanner. 1 x 10mm and 11mm Box Spanner. 1 x 12mm and 13mm Box Spanner. 1 x 14mm and 15mm Box Spanner. 1 x 16mm and 17mm Box Spanner. 1 x 18mm and 19mm Box Spanner. 1 x 20mm and 22mm Box Spanner. 1 x Tommy Bar.
TheFaithfull FSC Marking Knife has adiamond shaped blade, bevelled on one side only. Allowing the flat side close contact with a straight edge or cutting guide when laying out particularly across the grain of the wood. Fitted with a hardwood handle and brass ferrule. FSC-certified wood is used in the manufacture of this product. Wood products with FSC certification undergo a rigorous set of environmental, social, and economic requirements to be considered sustainable and responsibly sourced.Length: 175mm (7in).
The Faithfull Teflon Foam Gun is a high-quality foam gun designed for installing door and window frames, filling and sealing cavities and joints, sealing pipe or cable penetrations in walls, and sealing joints in wall insulation sheets.The gun is compatible with standard 500ml and 750ml gun grade Polyurethane pressurised expanding foam canisters. It features a spring trigger mechanism with micro-fast foam flow adjustment, to give the user precise control over the foam output, this means greater accuracy and reduced waste on the job.The barrel of the gun is hermetically sealed upon trigger release, preventing the foam from hardening inside the gun. The gun also benefits from a fully coated non-stick body, and needle and canister fitting valve, and a stainless steel barrel, making cleaning a breeze.
The Faithfull Long Barrel Foam Spurt Gun is a high-quality foam gun designed for installing door and window frames, filling and sealing cavities and joints, sealing pipe or cable penetrations in walls, and sealing joints in wall insulation sheets.The gun is compatible with standard 500ml and 750ml gun grade Polyurethane pressurised expanding foam canisters. It features a spring trigger mechanism and flow adjuster knob, to give the user precise control over the foam output, this means greater accuracy and reduced waste on the job.The barrel of the gun is hermetically sealed upon trigger release, preventing the foam from hardening inside the gun. The gun also benefits from an extra-long 500mm barrel for hard to reach places, and a stainless-steel needle to help make cleaning easier.
The Faithfull Foam Spurt Gun is a high-quality foam gun designed for installing door and window frames, filling and sealing cavities and joints, sealing pipe or cable penetrations in walls, and sealing joints in wall insulation sheets.The gun is compatible with standard 500ml and 750ml gun grade Polyurethane pressurised expanding foam canisters. It features a spring trigger mechanism and flow adjuster knob, to give the user precise control over the foam output, this means greater accuracy and reduced waste on the job.The barrel of the gun is hermetically sealed upon trigger release, preventing the foam from hardening inside the gun. The gun also benefits from a stainless-steel needle and barrel to help make cleaning easier.
The Einhell TP-HD 18/26 Li BL-Solo Power X-Change Rotary Hammer is a real all-rounder. It combines four functions in one device: drilling, hammer drilling and chiselling with and without fixing. These functions can be adjusted with the aid of a central position switch. The device is powered by the powerful Einhell PurePOWER brushless motor. This brushless motor offers more power and longer running time than conventional carbon brush motors. After online registration, there is a 10-year warranty on the brushless motor. The speed can be finely metered depending on the material and feed. A universal SDS-Plus tool holder with semi-automatic operation allows for quick and simple tool changes. Operation is pleasant and fatigue-free thanks to the ergonomic handle area with softgrip. The anti-vibration handle protects from vibrations to ensure precise work. There is also a robust drill depth stop for exact drill holes is infinitely adjustable andLED light for optimally lighting your working area. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. Supplied in a practical E-Box transport and storage case. Specifications: No Load Speed: 1,200/min. Impact Rate: 5,500/bpm. Impact Energy: 2.6 Joules. Max. Drilling Diameter: Concrete 26mm, Steel 13mm. Weight: 3.04kg.
The Einhell TE-VC 18/10 Li-Solo Power X-Change Wet and Dry Vac is highly versatile, it can be used in a wide variety of environments, home, workshed, basement or garage. Thanks to its wet or dry vacuuming capabilities. There is also a blow connection which is for blow-cleaning hard-to-reach areas. The intelligent position of the On/Off switch enables convenient one-hand operation. For comfortable working with low noise the motor is quiet in operation. Ergonomically designed with a carry-handle for easy transportation. The included accessories can be conveniently stowed away directly on the equipment. The container has quick-release fasteners for emptying in a flash. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. Supplied with:1 x Extendible Hose 2m, 1 x 2-in-1 Crevice/Brush Nozzle, 1 x 2-in-1 Upholstery/Universal Nozzle, 1 x Dirt Collection Bag and 1 x Foam Filter. Specifications: Capacity: 10 litre. Suction Power: 90 mbar. Sound Pressure Level (Volume): 72 dB (A). Suction Hose Diameter: 36mm. Suction Hose Length: 2m. Weight: 3.05kg.
The Einhell TE-TS 36/210 Li-Solo Power X-Change Table Saw can be used to cut soft and hard wood. Its sturdy aluminum table is lightweight, torsion-resistant and has perfect sliding properties. For wider workpieces, the table has extendable extensions on the right. A softstart function protects the engine and also the transmission from false starts. The infinitely variable height adjustment of the saw blade ensures safety in use. There is also an extremely stable parallel stop to ensure precise longitudinal cuts. Its compact design allows it to beintegrated into small workshops or hobby cellars and is also ideal for mobile use. Included in the delivery is an angle stop for accurate mitre cuts from -60 to and60° degrees. The mitre blade can be tilted steplessly to the left by 45°. Suction connections on the housing and saw blade guard ensure a clean, dust-free and flour-free workplace. Holders on the housing are used to store all attachments on the device. Supplied with ahigh-quality HM saw blade, which was specially developed for cordless saws. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. This table saw needs 2 x 18V batteries to run. Specifications: No Load Speed: 3,800/min. Cutting Height: 70mm. Max. Ripping Capacity: Right 625mm. Angle Stop (Min./Max.) -60° / 60°. Blade Diameter: 210mm. Weight: 13.15kg.
The Einhell TE-SY 18/90 Li-Solo Power X-Change Paint Spray Systemis ideal for painting and varnishing jobs. Suitable for medium to large areas thanks to the 1,200ml paint container and the high delivery rate of up to 1000 ml/min. Various liquids with a maximum viscosity of 90 DIN-sec can be used. For optimal application of varnishes and glazes, the amount of paint can be regulated directly on the handle using a rotary wheel. The adjustable amount of air determines the width of the paint jet. The adjustable air cap allows you to work with both vertical and horizontal or circular jets. The paint spray system is pleasant to use thanks to the separate blower station, the shoulder belt and the 1.8 m long air hose. Thanks to the hinged cover, the inserted battery is protected against contact with liquids, dirt or paint splashes. The spray head can be completely removed for easy cleaning. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. Supplied with: 1 x Paint Container with Measuring Scale and Lid, 3 x Nozzles (Ø 3.0mm, 2.5mm, 1.5mm), 1 x Container for viscosity testing, 1 x Cleaning Brush and 1 x Cleaning Needle. Specifications: Delivery Capacity: 1,000 ml/min. Max. Viscosity:90 DIN-sec. Paint Container Volume: 1200ml. Air Hose Length: 1.8m. Weight:2.66kg.
The Einhell TE-BJ 18 Li-Solo Power X-Change Biscuit Jointer is suitable for all commercially available flat dowel sizes up to type 20. Its solid aluminium design allows precise groove milling. The flexible assistant scores highly with infinitely variable alignment options both for height adjustment and for angle adjustment up to 90°. Milling depth can be adjusted using the 6-stage quick adjustment. A spindle lock ensures a simple and quick milling cutter change. Supplied with afront hole spanner for milling cutter change and a dust collection sack for a dust-free work area.Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. Specifications: Tilt Angle (Min./Max.) 0°/90°. Number of Milling Depth Steps: 6. Milling Blade Diameter: 100mm. Milling Blade Holder Diameter: 22mm. Milling Blade Thickness: 4mm. Max. Milling Depth: 20mm. Weight: 2.4kg.
The Einhell TC-SY 18/60 Li-Solo Power X-Change Spray Gun is suitable for small and medium-sized work surfaces. Can be used for spraying paints and glazes, detergents and impregnating agents as well as oils. The motor delivers up to 650ml per minute through the adjustable air cap for vertical, horizontal and omnidirectional jets; the spray head is removable for cleaning all paint-bearing elements. The softgrip allows the spray gun to be handled safely and comfortably. For space-saving storage, a suspension device is attached to the housing. Delivery includes 2 nozzles for different varnish and glaze viscosities and 100ml containers for viscosity testing, cleaning brush for cleaning the riser and cleaning needle for cleaning the spray nozzle, plus 800ml paint container with measuring scale and the matching lid. Member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Delivery Capacity: 650ml/min. Max. Viscosity: 60 DIN-sec. Paint Container Volume: 800ml. Weight: 1.2kg.
The Einhell TC-SM 2531/2 U Sliding Mitre Saw is a high-quality tool for ambitious DIY enthusiasts. It enables the processing of wood, coated panels and plastics. The cross-cut saw turntable made of high-quality die-cast aluminium has a precise angle adjustment which can be locked in different positions with one touch. With its continuously tilting saw head to the left, the saw allows the attachment of mitres and chamfers at any desired angle up to 45°. The double-supported pulling function allows the cutting of particularly wide workpieces. A robust clamping device is provided for the secure fixing of the workpiece. Thanks to cutting depth adjustment, even demanding work can be carried out effortlessly. The saw blade can be easily changed by means of a spindle lock. A dust collection sack ensures cleanliness at the workplace. Thanks to the underframe, a relaxed posture is ensured. A transport lock is provided for easy, safe transport. Specifications: Input Power: 1,900W. No Load Speed: 4,800/min. Blade: 254 x 30mm bore. Cutting Depth: 45° x 45° 40mm,90° x 90° 70mm,45° x 45° 210mm,90° x 90° 230mm. Min./Max. Swivel Range (Saw Head): 0/45°. Min./Max. Swivel Range (Saw Table): 45°. Weight: 17.76kg.
This Einhell Power-X-Change Starter Kit contains the following: 2 x 18V 4.0Ah Power X-Change Li-ion Batteries. They features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature and voltage, and even a deeply discharged battery can be charged in repair mode, which offers a long working battery life. The high-quality Li-ion battery cells provide nearly no self-discharge and the rubber-coated housing gives high impact protection and a high grip. It also has a recessed grip which ensures good ergonomic handling. 1 x 18V PXC Power-X Twincharger charges two 18V Li-ion batteries at the same time and can be used universally for all 18V Power X-Change batteries. Intelligent charging management provides maximum safety and optimum charging. Charging cycles are adjusted to the specific situation, so the batteries have a longer service life. The 6-stage charging system provides the user with up-to-the-moment battery status information. Integrated suspension eyelets for easy wall mounting.
The DEWALT DCW620H2 1/2in Plunge Router has a powerful and efficient brushless motor, giving extended run-time and providing long service life. Variable speed settings make it ideal for a wide range of available cutters/materials. Maintains constant speed under increased loads. Doesn’t slow down in tough applications so maintains quality of surface finish. It offers a deep plunge capacity (70mm), giving you the ability to complete applications requiring deeper plunge. A plunge lock lever provides accuracy and consistency. Quickly lock plunge when applying force to the router. The trigger depth lock eliminates downward force during depth lock operation. Lock depth with one touch trigger. The guide bush centring system provides greater accuracy when using bush guided jigs and fixtures. Ensuring concentricity of cutter and bush. Over moulded handles reduce user fatigue and increase comfort. It also features an ergonomic trigger switch with lock-on/lock-off. This makes it easy to start/stop the unit and to lock-on if required for extended applications. Its compact, lightweight design, only 3.5kg (without battery), increases control/manoeuvrability and reduces fatigue during longer applications. Compatible with common guide bushes. Users are able to easily source many key bush sizes and use existing systems. Specifications: Collet Capacity: 12mm, 1/2in, 8mm, 1/4in, 6mm. No Load Speed: 11,000-23,000/min. Plunge Depth: 70mm. Weight: 3.5kg (exc. battery). Supplied with: 2 x 18V 5.0Ah POWERSTACK™ Slide Batteries, 1 x DCB1104 Charger, 2 x Collets (1/4inand 1/2in), 1 x1/2in Collet, 1 x30mm Guide Bush, 1 x Side Fence, 1 x Cantering Cone, 2 x Sub-bases (Guide Bush and Larger Aperture), 1 x Under Base Dust Chute and 1 x Deep TSTAK™.
The DEWALT DCN694 XR Metal Connector Nailer is a cordless gas free solution for working with timber frame metal connector brackets. Powered by a powerful brushless motor and DEWALT 18V XR battery technology. Rapid Cycle Sequential mode offers all of the speed of 'bump' mode, for use in areas where only Sequential tools can be used. Its two speeds allows for firing all lengths of nails. Its versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The ergonomic tool design allows the nailer to fit easily between a 400mm centre stud. With increased visibility and durability along with protection for work-surfaces from the non-mar contact-trip. The hole alignment pin finds the hole quickly and positions the tool securely to ensure you hit the hole every time. Tool free stall/jam clearance minimises user down time. Dry fire lockout also ensures the tool is protected from firing without nails in the magazine. The user can engage contact trip lock-off and prevent accidental discharge of fastener. Supplied with a reversable belt/rafter hook for increased portability and versatility on the job-site. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Nail Diameter: 3.4-4mm. Nail length: 35mm. Magazine Capacity: 27 nails. Weight: 3.6kg.
The DEWALT DCK2062P2TTwin Pack, contains the following: 1 x 18V DCD709 XR Compact Hammer Drill Driver with an efficient brushless motor delivering high performance, extends tool life and allows for a much shorter design. 15 position adjustable torque control provides consistent screw driving into a variety of materials. The 65Nm torque allows you to achieve tough applications. There is also a foot LED with delay feature for better workpiece illumination. Chuck: 13mm. No Load Speed: 0-450/0-1,650/min. Impact Rate: 0-7,650/0-28,050/min. Max Torque: 65Nm. Capacity: Wood 30mm, Steel 13mm, Masonry 13mm. 1 x 18V DCF809 XR Impact Driver with an efficient brushless motor delivering high performance, extends tool life and allows for a much shorter design. Delivers 190Nm of torque for the toughest of applications and extended runtime. Fitted with a 'Drop and Load' bit holder for one-handed operation. Bit Holder: 6.35mm (1/4in). No Load Speed: 0-2,800/min. Impact Rate: 0-3,200/bpm. Max Torque: 190Nm. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V. Battery Chemistry: Li-ion. Charging Current: 4.0 A. Also supplied with:2 x 18V 5.0Ah Batteries and 1 x TSTAK Carry Case.
The DEWALT DCF860 E2T XR Impact Driver has a brushless motor which delivers high performance, extends tool life and allows for a much shorter design. Fitted with a Drop and Load bit holder for easy, one-handed operation. Its compact design makes it ideal for a wide range of applications in construction, industrial and automotive environments. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode. Supplied with: 2 x 18V 1.7Ah POWERSTACK Li-ion Batteries, 1 x Charger and 1 x TSTAK Kitbox. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all of the 18V XR tools you already have. Specifications: Bit Holder: 6.35mm (1/4in). No Load Speed: 0-1,800/0-2,800/0-3,800/min. Impact Rate: 0-4,400/bpm. Max. Torque: 282Nm. Weight: 1.09kg (without battery). * Regarding 50% more power: vs DCB183 battery, not in application. ** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery.
This DEWALT DCD805P2T XR BL G3 Combi is supplied with: 1 x Magnetic Bit Holder. 1 x Belt Hook. 2 x 18V 5.0Ah Li-ion Batteries 1 x Multi-Volt Charger. 1 x TSTAK Carry Case. The DEWALT DCD805 XR Brushless G3 Combi has been engineered to give the greatest performance on the toughest jobsites, the 2 speed and 15 torque settings give the ultimate control over drilling and fastening applications. Its ultra-compact, lightweight design allows use in confined spaces, and fitted with an ergonomic, overmould rubber grip improves the user's comfort. The enhanced pivoting LED positioned on the foot offers greater visibility in dark, and confined spaces. Specifications: Chuck: 13mm. No Load Speed: 0-650/2,000/min. Impact Rate: 34,000/bpm. Max. Torque: 90Nm. Capacity: Steel 13mm, Masonry 13mm, Wood 55mm. 2 x 18V 5.0Ah Li-ion Batteries
The DEWALT DCD1007 Hammer Drill has a brushless motor which delivers enhanced efficiency as well as durability. Delivers precise control via a variable speed trigger. The 3-speed transmission and electronic torque control lets you customise the performance, so you always get the right setting for drilling and screwdriving. Its compact design incorporates a comfortable and ergonomic grip design. The Perform and Protect E-Clutch system which will shut down the tool if it detects any kind of bind up situation. This protects the tool from overloading. There is also a handy LED work light, enabling work in any lighting condition. Supplied with: 1 x Side Handle. 2 x 18V 5.0Ah POWERSTACK™ Li-ion Batteries. 1 x DCB1104 Battery Charger. 1 x TSTAK Case. Specifications: Chuck: 13mm.No Load Speed: 0-450/0-1200/0-2000/min. Impact Rate: 0-8,500/0-2,210/0-38,250/bpm.Max. Torque: 169Nm.Capacity: Steel 12.7mm, Masonry 12.7mm, Wood 38mm.Weight: 1.87kg (without battery).
Bosch Cordless freedom with the power of a pneumatic tool without compressors, gas cartridges, or cords: gasless 16ga (1.6mm) finish nailer with bump fire mode. You can activate and operate the tool with just one hand thanks to the thumb-actuated power switch, it is gentle on your wrist and lungs thanks to very low recoil and gasless operation. Fires 1.6ga (1.6mm) Nails 32-64mm Low recoil Dry fire Lock-out One handed operation Stepless depth adustment Belt hook.
The Bosch GLL 2-10 Professional Line Laser projects horizontal and vertical laser lines, ideal for short-range applications. Its compact design and intuitive operation allow for easy handling. Robust thanks to IP54 dust and splash water protection. Supplied with: 3 x AA 1.5V LR6 Batteries. 1 x Protective Bag. Specifications: Accuracy: ± 0.3 mm/m. Self-levelling Range: ±4°. Working Range: 10m. Levelling Time: 4 Seconds. Power Supply: 3 x AA 1.5V LR6 Batteries (supplied). Operating Temperature: -10-50°C. Storage Temperature: -20-70°C. Dust and Splash Protection: IP54. Tripod Thread: 1/4in, 5/8in. Weight: 0.49kg.
The Bosch Tabless high-endurance battery with more runtime and maximum power designed for BITURBO tools. Has up to 71% longer runtime for heavy-duty applications thanks to the highly innovative tabless cell technology, with extended battery life thanks to outstanding heat management with COOLPACK 2.0.Compatible with the Bosch Professional 18V System and the multi-brand battery alliance AMPShare.
The Bahco 317 Hacksaw is suitable for all-round use. It has a slim, comfortable frame design to improve access in confined spaces and to allow easier storage. The special grip at the front of the frame provides good support for the guiding hand to ensure superb performance.The hacksaw frame has an alternative 90° blade mounting for flush cutting. Supplied complete with a 300mm (12in) 24 TPI reliable and shatterproof Sandflex bi-metal blade for excellent cutting performance. Additionally this hacksaw is supplied with 3 x 300mm (12in) Sandflex 24tpi Bi-metal Blades FREE. Specifications: Frame Length: 432mm. Blade Length: 300mm (12in). Weight: 470g.
The Blue Spot Tools Wall Anchor Setting Tool produced for the installation of hollow wall anchors into plasterboard walls. The molded plastic handle is non slip for increased user grip and the one-handed design ensures quick and easy use.
The BLACK and DECKER CS1200 Circular Saw has been designed for DIYers. It takes a 165mm circular saw blade which can be raised, lowered and bevelled in order to make 90° or angled cuts through a variety of thicknesses of timber and similar wood-based materials. The base plate includes a slot for a rip fence. Easy to use, the trigger features a safety start to prevent accidental activation. The dust port has been integrated into the blade guard. This can be connected to a vacuum cleaner or dust extractor hose for dust extraction. Specifications: Input Power: 1,200W. Blade Diameter: 165mm.
This Blue Spot Tools Expanding Foam Applicator Gun is manufactured from aluminium alloy with a nickel plating for increased durability. It also features an ergonomic rugged non slip soft grip handle for user comfort. The springed trigger allows for precise and accurate application along with a foam flow control knob to reduce wasteage with less clean up.
The Vitrex Vacuum Suction Cup can be used nbsp;to lift, position and set large format tiles. It features a pump action with safety indicator which shows there is sufficient pressure. It has a holding power of 110kg when used on clean, smooth, non-porous surfaces. Suitable for use on smooth porcelain, granite, tile, stone, glass, ceramic, marble and other non-porous materials.
