The Flex Power Tools ID 1/4 18.0-EC HD C Impact Driver has a brushless motor for greater efficiency and a longer service life. Speed Command provides three different speed settings for a variety of applications. Prevents, among others, over tightening of small screws. It also features a Tap mode for self-tapping short and long screws. The electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. Whilst the electronic quick-acting brake protects the user. A bit ejector allows for quick and easy bit change. Fitted with an ergonomically designed, non-slip, soft grip handle. The integrated LED lamp with persistence function enables vision in darker workplaces.Comes as a Bare Unit, NO battery or charger. Suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Bit Holder: 1/4inNo Load Speed: 0-3,700/0-4,200/min.Torque Settings: 58/104/237NmWeight: 1.2kg (without battery pack)
Flex Power Tools HG 650 2000 Hot Air Gun with temperature control in 10° increments from 50°-650°C and 2 air flow settings. Heats up in seconds thanks to efficient heating elements. Its LCD display lets you easily see your temperature and air flow settings.The compact, ergonomic design makes it comfortable and easy to handle. Fitted with a protective handle for optimum user protection. Ideally suited to many jobs: hardening and drying as well as removal of paints and coatings, stickers, moulding and shrinking of plastic parts and shrink tubes, soldering of electrical connections and copper pipe connections. It can also be used for removing paint and adhesive residues, foiling cars and car parts, spot repair of truck tarpaulins, and for loosening rusted and stuck connections.Supplied with a Flat Nozzle, Reflector and Reducing Nozzle.Specifications:Input Power: 2,000WMax. Air Flow Rate: 500 l/min.Air Volume: 250/500 l/min.Air Temperature: 50 - 650°CCable Length: 4.0mWeight: 0.7kg
Flex Power Tools HG 530 18 Heat Gun with 2 temperature settings 260°/530°C and 2 air flow settings. Always ready for work thanks to quick heating, up to 300°C in ~15 seconds. An integrated LED lamp for optimum illumination of the work area.A flat, reflector and reducing nozzle are included in the scope of delivery. Ideally suited to many jobs: Hardening and drying as well as removal of paints and coatings, stickers, moulding and shrinking of plastic parts and shrink tubes, soldering of electrical connections and copper pipe connections.Comes as a Bare Unit, NO battery or charger. Suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Max. Air Flow Rate: 200 l/min.Air Volume: 130/200 l/min.Air Temperature: 260/530°CWeight: 0.6kg (without battery pack)
18V Flex Power Tools FBE 30 18-EC C-Set TrinoxFlex Belt File has a brushless motor with greater efficiency and a longer service life. With microprocessor controls, speed selection, tachogenerator constant speed control, for total control. The sanding head rotates through 140°. For use with sanding arms in 9mm or 30mm.An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. Safety is provided via soft start, restart protection after power failure, overload protection and temperature monitoring.This machine is part of the TrinoxFlex range which is a modular system allowing you to change the purpose of the machine using the different modules available. Its unique tool attachment system features quick coupling for tool-free change of system attachments. Attachments sold separately. Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 1,700/2,390/3,080/3,760/min.Belt Length: 533mmBelt Width: 4-30mmWeight: 2.6kg (without battery pack)
The Flex Power Tools GE 6 R-EC 230/BS Rotary Giraffe® Sander has a very flat, gimbal-mounted sanding head with a swivel range of 160°. Enables high flexibility and optimum adjustment when sanding on walls and ceilings. The segment sanding head has a rotatable edge segment, this allows the sanding of surface transitions from wall to wall and wall to ceiling. The head's rotation follows the movement of the machine, without interruption of work.Light weight: Carbon is a very light material, making the wall and ceiling sander’s overall weight much lighter. This reduces the stress on the user and minimises fatigue during sanding over longer periods. This unusually light machine offers unique user comfort. The wall and ceiling sander is optimally balanced, which enables perfect guidance as the weight is evenly distributed across the sander. Extremely pleasant to handle thanks to the ergonomically-shaped carbon guide tube and the soft grip insert on the main handle and the spade handle.It offers effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment. There is also an option to connect a vacuum cleaner. The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe® does not have to be mounted and is immediately ready for use.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Input Power: 500WNo Load Speed: 1,100-1,680/min.Backing Pad Diameter: 225mmHead Angle of Inclination: 160°Cable Length: 4.0mLength: 1520mmWeight: 2.84kg
Flex Power Tools GG 200 18 Hot Glue Gun with 2 temperature settings of 130°/200°C. The reliable gluing performance of 20 g/min enables rapid work progress. It offers quick heating-up, within 2 minutes, thanks to electronically-controlled heating elements. Ideal for many jobs: fastening and fixing stucco boards, skirting boards, cable ducts, for fabric and leather repairs and for repairing hail damage with an adhesive pad and pull hammer.Comes as a Bare Unit, NO battery or charger. Suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Working Temperature: 130/200°CGlue Stick Diameter: 11mmHeat-up Time: 1 minuteMax. Throughput: 20 g/min.Weight: 0.4kg (without battery pack)
The Flex Power Tools EB 500 GE 6 Extension offers greater flexibility, can be operated easily and without any tools. Allows you to work in high rooms. For the GE 6 R-EC 230/BS Drywall Sander.Specifications:Length: 500mm
Flex Power Tools DGE 25 18.0-EC C Straight Grinder has a brushless motor with greater efficiency and a longer service life. Other features include speed preselection in 4 steps, CDC constant electronics, soft start, overload protection, restart lock and temperature monitoring. An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. It's long-necked design provides optimum handling and enables you to reach into hard-to-access areas. The spindle lock allows for easy tool change. A protective metal grille (removable) provides protection against dust ingress. The ideal tool for grinding, deburring, freehand milling, cutting, rust removal.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 10,000/15,000/20,000/25,000/min.Max. Sanding Wheel Diameter: 50mmWeight: 1.47kg (without battery pack)
The Flex Power Tools BRE 50 18-EC C-Set TrinoxFlex Pipe Belt Sander has a brushless motor with greater efficiency and a longer service life. With microprocessor controls, speed selection, tachogenerator constant speed control, for total control. An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. Safety is provided via soft start, restart protection after power failure, overload protection and temperature monitoring.The high-quality, spring-mounted sanding arm is made from a light alloy with 2 deflection rollers. For optimum wrap-round on pipes, up to max. 270°. The protective metal grille (removable) provides protection against dust ingress.This machine is part of the TrinoxFlex range which is a modular system allowing you to change the purpose of the machine using the different modules available. Its unique tool attachment system features quick coupling for tool-free change of system attachments. Attachments sold separately. Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 1,700/2,390/3,080/3,760/minSanding Belt Dimension: 533 x 4 - 30mmSuitable for Max. Pipe Diameter: 50mmWeight: 2.7kg (without battery pack)
Flex Power Tools DW 45 18.0-EC C Drywall Screwdriver has a brushless motor with greater efficiency and a longer service life. It offers right/left rotation with safety catch. Fitted with an ergonomically shaped soft handle with on/off switch and lock for continuous operation.An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. For added safety there is an electronic, quick-acting brake. Other features include an integrated LED lamp with persistence function, LED battery capacity display and tool-free detachable depth stop.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Tool Holder: Drywall Screwdriver 1/4in insideNo Load Speed: 0-4,500/min.Max. Torque: 28NmMax. Screw Diameter: 4.2mmWeight: 0.975kg (without battery pack)
The Flex Power Tools CER 18.0-EC C Router / Trimmer has a brushless motor with greater efficiency and a longer service life. An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. This tool combines an edge milling cutter and router. Quick and easy cutter change thanks to integrated spindle lock. The collet can be used for milling cutters with a shank diameter of up to 8mm. It features a scale zero function, milling depth adjustment via turret stop and infinitely variable milling depth fine adjustment via rotating ring.The milling table with rubber-coated handles and clamping function enables safe guidance. The Plexiglas base plate always gives the user a clear view of the milling cutter for perfect results. Ideal for a wide range of applications in woodworking, renovation, drywall construction and mould making. Milling of corner joints, joints, curves/contours with templates, re-milling of laminate profiles. Milling solid wood edges, recesses and grooves with templates and guide rings, making templates for production, etc.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 15,000-30,000/min.Collet Diameter: 8mmMilling Stroke (Depth): 50mmDust Extraction Ø: 36mmWeight: 1.8kg (without battery pack)
The 18V Flex Power Tools BSE 50 18-EC C-Set TrinoxFlex Burnisher for optimum finishing of various materials, for burnishing, texturing, polishing, brushing, smoothing, de-rusting and deburring steel and stainless steel surfaces. The variably adjustable burnishing attachment allows working close up to the edge. Also suitable for narrow rollers, incl. edge guide. Tool-free grinding tool change via patented quick-change system.It has a brushless motor with greater efficiency and a longer service life. With microprocessor controls, speed selection, tachogenerator constant speed control, for total control. An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. Safety is provided via soft start, restart protection after power failure, overload protection and temperature monitoring.This machine is part of the TrinoxFlex range which is a modular system allowing you to change the purpose of the machine using the different modules available. Its unique tool attachment system features quick coupling for tool-free change of system attachments. Attachments sold separately. Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 1,700/2,390/3,080/3,760/min.Brush Diameter: 125mmBrush Width 50mmTool Fixture, Brush Sander: 19mmWeight: 2.3kg (without battery pack)
The Ferret Thermal Inspection Camera allows you to view thermal imaging without being restricted to handheld use. Designed for convenience and ease of use, the Ferret Thermal camera is fully wireless and rechargeable. Easily attachable to rods or poles for extended reach, making it ideal for hard-to-reach locations, while also offering handheld usability for maximum flexibility.Everything about the Ferret Thermal is purpose designed and high quality from the 3 x K9 glasses and 1 x Silicon lens, the high sensitivity USA made FLIR Lepton thermal sensor, the onboard WiFi hotspot, the rugged IP67 rating and the 2 hour battery life all in a super lightweight under 2 ounce (57 gram) camera. It’s the same length as a Ferret Pro/Plus, just a little bit fatter around the middle to fit everything inside.Easy to use, the Free Ferret app provides a greater range of thermal colour palettes and image modes, including thermal only, visible only, and thermal overlay, enhancing functionality. Wirelessly link to your smartphone to easily save and share photos and videos.Perfect for an extensive range of applications, including electrical, home inspections, HVAC, building inspections, plumbing, chimney inspections, pest inspections, and more.Supplied in a Padded EVA Case with: Spare O-rings, 1 x Flexible Gooseneck, Thread Adaptors, 1 x USB-C Data Charge Cable, Instruction Manual and Sticker.Specifications:Thermal Resolution: 320x240 TISR Resolution (160x120 Native IR)Visible Resolution: 720p HDThermal Pixels: 76,800 (19,200 Native Pixels)Temperature Range: -10°C to +400°C (14°F to 752°F)Thermal Sensitivity: <50 mKThermal Spectral Range: Longwave Infrared, 8μm to 14μmEmissivity: Variable via AppWireless Range: 30m (line of sight)Battery Life: Up to 2 hoursRecharge Time: 95% charge in 1.5 hoursDimensions: 75 x 40mmWeight: 57g
Faithfull Tailor Shears are meticulously designed to offer versatility and ease of use across various cutting tasks. With a length of 262mm (10.3in), they provide an ideal balance between precision and control. The scissors are crafted from 65mn high quality carbon steel, ensuring they remain durable and reliable over time. The 6.8mm blade thickness allows for precise cuts, making these scissors suitable for detailed work as well as cutting of heavy material. Additionally, the chrome plated finish enhances their aesthetic appeal and contributes to a longer working life by maintaining the blade's edge and appearance. Weighing in at 408 grams, these scissors are medium weight and designed to minimise fatigue while offering the ability for heavy material cutting applications. Whether you're cutting heavy fabric, or other thinner material, our Tailor Shears are the perfect tool for the job, offering a seamless blend of performance and comfort with every cut.
The Faithfull Eco Flex Tub has been designed to deliver top performance and durability. With reinforced handles, this adaptable tub offers the pliability of similar products while remaining tactile and impact-resistant. Cold and heat resistant and has a load capacity of 150kg.Made from post-consumer recycled material obtained from beverage cartons, the Eco Flex Tub is crafted from low-density polyethylene blended with aluminium, ensuring it is a sustainable and dependable option. They are also made from 100% recyclable material.
1 x Faithfull Eco Flex Tub 75 litre - Recycled Green
The Faithfull Claw Hammer is designed to meet the needs of both professionals and DIY enthusiasts, offering durability, versatility, and ergonomic design. These hammers feature high-strength fibreglass shafts to provide excellent durability and shock absorption, reducing user fatigue during prolonged use. The head is crafted from high-quality steel, ensuring efficient and precise striking, with some models featuring polished steel heads and others black steel powder-coated heads for added durability. The ergonomic, non-slip grips offer comfort and control, ensuring a secure hold even in challenging conditions. Despite their robust construction, these hammers are lightweight, making them easy to handle without compromising on power. Whether you’re driving nails, shaping metal, or breaking up masonry, Faithfull’s fibreglass hammers are built to last, offering reliable performance and comfort for any project.
1 x Faithfull Claw Hammer Fibreglass Shaft 567g (20oz)
The Faithfull Eco Flex Tub has been designed to deliver top performance and durability. With reinforced handles, this adaptable tub offers the pliability of similar products while remaining tactile and impact-resistant. Cold and heat resistant and has a load capacity of 150kg.Made from post-consumer recycled material obtained from beverage cartons, the Eco Flex Tub is crafted from low-density polyethylene blended with aluminium, ensuring it is a sustainable and dependable option. They are also made from 100% recyclable material.
1 x Faithfull Eco Flex Tub 75 litre - Recycled Black
The Einhell TE-COL 18/27 li-Solo Cordless Coolbox is ideal on the go, whether on excursions or at the construction site. Whether cool drinks in summer or a warm meal in between: A cordless cooling box is a must-have for leisure trips as well as for any well-deserved lunch break at the construction site. Part of the Einhell Power X‑Change family and can therefore be combined with any battery in the system series. At the same time, it comes with a 230 V and a 12 V cable. The cooling box automatically selects the operating mode depending on the existing power source. This way, it can be pre-cooled at home using a socket and then cooled on the go using the cigarette lighter socket of your car. For 1 V operation, the cooling box is equipped with a vehicle battery protection that prevents any deep discharge of your battery. Afterwards, contents can be kept cool using the battery.The cooling box has a volume of 27 litres and can hold 36 cans (of 0.33 l each), 20 bottles (of 0.5 l each) or 6 large 1.5 l bottles. A flexible divider is supplied to divide the cold room, and there is also a bottle opener integrated into the housing. In addition, the box is equipped with a large pocket for accessories, a side pocket with a battery holder and a side pocket for a replaceable battery to extend the running time. With its energy efficiency class D, the cordless cooling box has a low power consumption. A battery charge indicator is integrated directly into the device. The cooling or heating functions can be selected via a central switch. Using the rotary switch, the cooling capacity can be set infinitely up to 20°C below the respective ambient temperature. The keep-warm function can be adjusted to max. 60°C. For easy transportation, the cooling box comes with an adjustable carrying strap with shoulder pad and a large carrying handle, which can also keep the lid of the cooling box open if necessary.Comes as a Bare Unit - No Battery or Charger supplied.
Einhell PLUS Power X-Change Battery Twin Pack.The Einhell Power X-Change Li-ion Batteries are controlled by a micro-processor, which monitors its key parameters such as temperature, voltage and current strength. This provides effective protection against overheating and ensures the right balance for optimum operating conditions.The battery can be charged irrespective of its charge level. An automatic check establishes conditions on which the charging process depends. In normal conditions, for example, the high-speed charging process is started directly. In other conditions, e.g. extreme cold or exhaustive discharge, gentle charging is performed at reduced current strength. This charging method protects the battery and is essential for ensuring a long service life.The intelligent charge control system controls each battery cell individually, ensuring each cell is fully charged. This produces maximum supply of power. Overcharging is not possible, so even a charged battery can remain in the charger.The battery has a 3-stage LED indicator which indicates not only the battery charge, but also extreme temperature conditions. It also has a triple shell design for optimum protection against damage.Specifications:Battery Capacity: 4.0Ah.Battery Chemistry: Li-ion.Voltage: 18 Volt.
The DeWALT TOUGHSERIES™ Chalk Reel rewinds 6x faster* with a 6:1 planetary gear system and features a durable aluminium case. Create prominent, clear chalk lines for roofing, framing, and general construction using the TOUGHSERIRES™ bold braided 1mm string with line lock feature. Help maximise life by maintaining this reel and making string replacements with the convenient open-access door.Designed for tough conditions on demanding job sites.
DeWALT DCS782 XR Mitre Saw for both first and second fix applications on the jobsite. The powerful 18V brushless motor offers a cutting capacity of 310 x 90mm, with a 165mm height capacity at the fence. Regenerative Braking Technology extends run time by redirecting lost energy back into the battery. Engineered for repeatable accuracy with dual horizontal rails and a stainless steel detent plate with common angles at 0, 15, 22.5, 31.6, 35.3 and 45 degrees. A large dual sliding fence provides maximum support in large material cuts at any angle or combination of angles. Cam lock mitre control makes mitre setting faster and easier, allowing to quickly adjust angles between 0° - 50° left and 0° - 60° right.The intuitive bevel lock with machined stops provides accurate and simple setting of bevel angles up to 49° left and right. A depth stop allows for adjustment of the cutting depth, ideal for grooving and rebating applications. Other features include Wireless Tool Control to enable automatic stop start dust extraction when used with the DCV586M, XPS crosscut positioning system for the ultimate in accuracy and visibility with no calibration needed and 100mm side handles for material support and increased portability on site.Works with all 18V XR and 54V XR FLEXVOLT® batteries, so you can make the most of all your current batteries. We recommend using the DCB1880-XJ 18V 8Ah XR battery for the best run time and performance.Specifications:No Load Speed: 3,800/Min.Blade Diameter x Bore: 305 x 30mmMax. Cutting Capacity: 45°/90° 219 x 90mm, 90°/45° 310 x 54mm, 45°/45° 219 x 54mmMax. Depth of Cut: 165 x 19mmProduct Height: 450mmProduct Length: 775mmWeight: 23.2kg
The DeWALT DCS782N XR Mitre Saw comes as a Bare Unit, NO battery or charger.Supplied with:1 x Stabiliser Bar1 x 60 Tooth Blade2 x Base Extensions1 x Material Clamp
DeWALT DCS782 XR Mitre Saw for both first and second fix applications on the jobsite. The powerful 18V brushless motor offers a cutting capacity of 310 x 90mm, with a 165mm height capacity at the fence. Regenerative Braking Technology extends run time by redirecting lost energy back into the battery. Engineered for repeatable accuracy with dual horizontal rails and a stainless steel detent plate with common angles at 0, 15, 22.5, 31.6, 35.3 and 45 degrees. A large dual sliding fence provides maximum support in large material cuts at any angle or combination of angles. Cam lock mitre control makes mitre setting faster and easier, allowing to quickly adjust angles between 0° - 50° left and 0° - 60° right.The intuitive bevel lock with machined stops provides accurate and simple setting of bevel angles up to 49° left and right. A depth stop allows for adjustment of the cutting depth, ideal for grooving and rebating applications. Other features include Wireless Tool Control to enable automatic stop start dust extraction when used with the DCV586M, XPS crosscut positioning system for the ultimate in accuracy and visibility with no calibration needed and 100mm side handles for material support and increased portability on site.Works with all 18V XR and 54V XR FLEXVOLT® batteries, so you can make the most of all your current batteries. We recommend using the DCB1880-XJ 18V 8Ah XR battery for the best run time and performance.Specifications:No Load Speed: 3,800/Min.Blade Diameter x Bore: 305 x 30mmMax. Cutting Capacity: 45°/90° 219 x 90mm, 90°/45° 310 x 54mm, 45°/45° 219 x 54mmMax. Depth of Cut: 165 x 19mmProduct Height: 450mmProduct Length: 775mmWeight: 23.2kg
The DeWALT DCS782XW2 XR Mitre Saw can deliver up to 371 cuts in 83mm skirting board with one DCB1880-XJ 18V 8Ah XR battery.Supplied with:2 x 18V 8.0Ah Li-ion Batteries1 x XR 8A Charger1 x Stabiliser Bar1 x 60 Tooth Blade2 x Base Extensions1 x Material Clamp
The DEWALT DCD799 XR Brushless Combi Drill has an all-metal transmission provides increased run time and longer tool life. Its ergonomic, ultra-compact, lightweight design makes it perfect for use in confined spaces.Part of the intelligent XR Lithium-ion Series for efficiency and making applications faster.Specifications:Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,650/min.Impact Rate: 0-7,650/0-28,050/bpmTorque: 26/74NmCapacity: Steel 13mm, Masonry 13mm, Wood 30mm
The DeWALT DCD799P1T XR Brushless Combi Drill is supplied with:1 x 18V 5.0Ah Li-ion Battery1 x DCB1104 Battery Charger1 x TSTAK Compatible Case
The STANLEY® Fibreglass Hi-Vis Claw Hammer not only reduces vibrations, but the forged high-carbon steel head improves durability and strength. The head and handle are also connected by 2-component epoxy adhesive, with both aspects balanced to help channel momentum and limit fatigue. The bi-material ergonomic grip features a ribbed surface and flared end to elevate comfort and grip, while the high-visibility green colouring makes this hammer much easier to find in a packed toolbox or work area.
The STANLEY® Heavy Duty Retractable Trade Knife has been designed for heavy-duty cutting jobs. Suitable for tough professional cutting applications such as carpet, flooring, drywall and more. Tool free blade change has been incorporated into slider for minimal down time.The hardened blade holder withstands intensive daily use and will not wear. Its redesigned nose delivers outstanding cut accuracy and ensures minimal blade wobble. Ergonomic design, grip zones and flare on knife tail for maximum control when making longer cuts. Its innovative pin-hinged body allows for easy blade access. A magnet holds the blade firmly in place during replacement. The body features storage space for up to 10 blades with magnetic blade retention, suitable for a full day of cutting.Supplied with 3 x STANLEY® Induction Hardened Blades. Compatible with STANLEY® FATMAX® Carbide Utility Blades.
1 x STANLEY® Heavy Duty Retractable Trade Knife (Silver)
The STANLEY® FatMax® Extreme Level Set contains the following:2 x STANLEY®FatMax® Pro Box Beam Spirit Levels. 5 times stronger than other STANLEY®levels, thanks to their unique reinforced box-beam construction. The lightweight aluminium body and sturdy bi-material handgrips make handling easy while the precision engineered, dual-machined levelling surfaces ensure maximum accuracy. Solid-block acrylic vials provide an accuracy of 0.5mm/m in eight orientations.In addition, every FatMax Pro level comes with a lifetime accuracy warranty. The vials are magnified by 20% for improved all round visibility, in more simple terms they are more easily read. They come with shock absorbing end caps protecting the level even if it is dropped.Size: 60cm & 120cm (2 & 4ft).1 x STANLEY® FatMax® Pro Torpedo Level built with a die-cast aluminum body for long lasting durability. The solid block vial provides accuracy of 0.5mm/m (0.0005in/in), and a 180-degree rotating vial is designed to duplicate angles.It includes a magnified center vial for improved visibility while its magnetic base features a pipe groove for use on rounded surfaces. Ideal for scaffolders, plus it is also perfect for installing machinery, air conditioning ducting or shelving.Size: 25cm.
The STANLEY® Heavy Duty Retractable Trade Knife has been designed for heavy-duty cutting jobs. Suitable for tough professional cutting applications such as carpet, flooring, drywall and more. Tool free blade change has been incorporated into slider for minimal down time.The hardened blade holder withstands intensive daily use and will not wear. Its redesigned nose delivers outstanding cut accuracy and ensures minimal blade wobble. Ergonomic design, grip zones and flare on knife tail for maximum control when making longer cuts. Its innovative pin-hinged body allows for easy blade access. A magnet holds the blade firmly in place during replacement. The body features storage space for up to 10 blades with magnetic blade retention, suitable for a full day of cutting.Supplied with 3 x STANLEY® Induction Hardened Blades. Compatible with STANLEY® FATMAX® Carbide Utility Blades.
1 x STANLEY® Heavy Duty Retractable Trade Knife (Black)
The STANLEY FATMAX® XTREME™ Box Beam Level has been designed to provide durability and accuracy, providing you with the performance you need for every job. The patented continuous edge enables the ability to draw or scribe uninterrupted lines along the full length of the level. Whilst its fine milled primary edge provides 0.5mm/m accuracy, with a secondary edge accuracy of 0.8mm/m. Fully secured vial technology is designed to protect the vials against drop damage, while the 90% larger plumb vial provides an easier-to-see bubble for better visibility. The shock absorbing end caps are rubber moulded to protect the level from drop damage and feature raised anti-slip surface protectors to help protect against slipping and surface marking. Additionally, the end caps can be removed, making 90-degree markings and corner lines easier and more accurate. Strategically placed finger grab rails and wrap around handed grips are also incorporated for easier one handed use and better ergonomic design.
1 x STANLEY® FATMAX® XTREME™ Box Beam Level 40cm
STANLEY® VDE Screwdrivers have a chrome vanadium steel blade with a hardened tip for increased durability and reduced wear. The tapered, slim insulation allows access without modification and safe working to 1,000V. Fitted with a large diameter, bi-material handle for excellent torque transmission and control. Tested to 10,000V, rated to 1,000V AC.This 5 piece set contains:4 x Slotted Screwdrivers: 2.5 x 75mm, 3.5 x 75mm, 4 x 100mm and 5.5 x 125mm2 x Pozidriv Screwdrivers: PZ1 x 80mm and PZ2 x 100mm1 x Voltage Tester
The STANLEY® Titan retractable knife is ideal for precision cutting of the most flexible to the most resistant materials, such as paper, cardboard, plastic or leather. The lightweight aluminium body has a strong brass wheel for efficient locking of the blade.Supplied with 100 blades.
The Bosch GO Professional Cordless Screwdriver helps you master delicate applications better. The mechanical clutch offers 7 torque settings for you to better match the power you need to the material you are working on. For delicate materials, simply select a low torque of 0.1Nm. For more robust applications, you can increase up to a maximum performance of 5Nm.The universal bit locker makes sure every 1/4in hex screwdriver bit is securely fixed so it cannot come loose during or after use and interrupt your workflow. With the integrated LED ring, you can light up dark areas comfortably. It also acts as a battery status indicator, so you can easily see the state of charge. Using any standard USB-C type cable, you can conveniently charge the GO on every jobsite or even on the go. You can activate your GO screwdriver in two ways: either press the ON/OFF button, or simply push the device against the workpiece.This is your go-to screwdriver for working on various delicate materials including plastic, wood, or metal. You will get optimal results when assembling furniture, repairing motherboards or computers, or installing electrical cabinets (when not under voltage).Supplied with: 1 x 8 Piece Screwdriver Bit Set, 1 x Extension Bit Holder 1 x USB-C Cable and 1 x Storage Case.Specifications:Bit Holder: 1/4in Internal HexNo Load Speed: 306-396/min.Max. Torque: 5NmMax. Screw Diameter: 5mmWeight: 0.32kg
The Band Of Builders Dry Marker has a grip-friendly and ergonomic design. Supplied in a holster with a built-in sharpener for clear markings. It's easy to remove from the holster, so you don't have to let go of what you're working with. The shape of the holster ensures the pen stays in place even when you move. The pen can be used whilst in the holster or removed completely depending on your preference. There is a hole in the bottom of the holster, this allows dirt and moisture to fall away from the pen, providing a longer life. The lead is easy to change and refills are available.
The Bahco 90 Series Green Phosphated ERGO™ Adjustable Wrench has a 40% wider opening compared to a standard adjustable wrench of equivalent size. The head combines slimness for accessibility with strength for performance, this combined with a convenient length of the handle and low weight makes it perfect for plumbers and other tradesmen that carry their tools with them. The jaws are angled at 15° to provide maximum access in confined spaces.Precision-hardened and anti-corrosion treated. With comfortable slip free, warm thermoplastic handle. Left-reading, measurement scale in mm.Specifications:Length: 218mmJaw Width: 38mm
The Bahco 90 Series Green Phosphated ERGO™ Adjustable Wrench has a 40% wider opening compared to a standard adjustable wrench of equivalent size. The head combines slimness for accessibility with strength for performance, this combined with a convenient length of the handle and low weight makes it perfect for plumbers and other tradesmen that carry their tools with them. The jaws are angled at 15° to provide maximum access in confined spaces.Precision-hardened and anti-corrosion treated. With comfortable slip free, warm thermoplastic handle. Left-reading, measurement scale in mm.Supplied with 2 Free Screwdrivers.Specifications:Length: 170mmJaw Width: 32mm
The Black & Decker BDCR18C1 Reciprocating Saw is perfect for cutting into wood, metal and plastic. It has a tool-free blade change saving time and effort when changing the blade. The compact, lightweight design incorporates an anti-slip soft grip handle for added comfort. Part of the 18V POWERCONNECT™ battery system, the interchangeable cordless battery system that works with all BLACK+DECKER® 18V cordless products. Supplied with: 1 x Blade, 1 x 18V 1.5Ah Li-ion Battery and 1 x Charger. Specifications: Strokes at No Load: 0-3,000/min.Stroke Length: 22mm.Sound pressure (LpA): 79.5 dB(A).Blade Length: Up to 30cm Long.
The MarXman Deep Hole Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. Each pen contains 250+ bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic.Recommended for jobs with fixing holes 50mm to 100mm, e.g. fence posts. Its special nozzle is designed to shoot the green pigment further and more accurately. Not advised for marking distances under 50mm.The perfect drilling companion for electrical, plumbing, building jobs and much more.
