John Guest white polypropylene push-fit reducing straight connector fitting connects two unequal metric sized pipes/tubes. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with EPDM seals, the fitting offers greater chemical resistance than push-fit acetal and is suitable for potable water (10 bar at 20°C) and intermittent hot water applications (4 bar at 60°C), including water treatment applications. All John Guest fittings are manufactured and assembled in the UK.
Pack of 5
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 5
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 2
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 3
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 4
A male BSP to Pushfit straight adaptor from the John Guest PM range. This connector is manufactured using non-toxic acetal copolymer, meeting the requirements of the US FDA, WRAS, ANSI/NSF-51, 61 and SK Zert. They are commonly used in food/beverage, pneumatic systems and water purification. Quick and convenient assembly and can be assembled and disassembled repeatedly
Pack of 10
This McAlpine chrome-plated chain, typically 18 inches long, is designed for suspending bath plugs and fixtures and provided with two triangles for secure attachment.� Manufactured in Chrome Plated Brass Comes with 2 Stainless Steel triangles Easy to install Durable Available in 3 lengths
This McAlpine chrome-plated chain, typically 16 inches long, is designed for suspending bath plugs and fixtures and provided with two triangles for secure attachment.� Manufactured in Chrome Plated Brass Comes with 2 Stainless Steel triangles Easy to install Durable Available in 3 lengths
This McAlpine chrome-plated chain, typically 9.5 inches long, is designed for suspending bath plugs and fixtures and provided with two triangles for secure attachment.� Manufactured in Chrome Plated Brass Comes with 2 Stainless Steel triangles Easy to install Durable Available in 3 lengths
The McAlpine CP2 is a 1.75" chrome-plated plastic plug with a rubber seal. Ideal for sealing plumbing fixtures in both residential and commercial settings. Comes with a rubber seal for better leak protection Manufactured in Chrome Plated Plastic Easy to install Durable Available in 1�" or 1�"
The McAlpine CP1 is a 1.5" chrome-plated plastic plug with a rubber seal. Ideal for sealing plumbing fixtures in both residential and commercial settings. Comes with a rubber seal for better leak protection Manufactured in Chrome Plated Plastic Easy to install Durable Available in 1�" or 1�"
Universal Donut washer for Close Coupled WCs gives flexibility to the installation of a range of different manufacturers' WCs. 1.5" Multifit Donut Washer kit Fits Virtually any toilet Perfect Spare to have on hand Unique Design Durable and easy to install
McAlpine CWP60-CB-BB 1.25" x 60mm Brushed Brass flange with spring loaded mushroom plug is a plumbing component used in kitchen and bathroom sink waste systems. The spring loaded mushroom plug helps to prevent odours and gases from escaping from the waste system. Centre pin dry fixing connection for a quick and simple installation. Suitable for basins with or without overflow. 1.25" x 60mm flange with spring loaded mushroom plug Durable and easy to install
McAlpine BWSUOFSS-COV 1.5" Universal Stainless Steel Basket Strainer Waste with Cover and Overflow is a practical and durable solution for draining sinks. The basket strainer waste is designed to capture food debris, preventing it from clogging pipes and causing blockages. The system comes with a stemball plug, which is easy to use and provides a secure seal to prevent leaks. 1.5" Basket Strainer Waste and Overflow 1.5" BSP Stemball Plug Durable and easy to install
McAlpine BWSUOFBN 1.5" Universal Brushed Nickel Basket Strainer Waste and Overflow is a practical and durable solution for draining sinks. The basket strainer waste is designed to capture food debris, preventing it from clogging pipes and causing blockages. The system comes with a stemball plug, which is easy to use and provides a secure seal to prevent leaks. 1.5" Basket Strainer Waste and Overflow 1.5" BSP Stemball Plug Durable and easy to install
McAlpine BWSUOFMB 1.5" Universal Matt Black Brass Basket Strainer Waste and Overflow is a practical and durable solution for draining sinks. The basket strainer waste is designed to capture food debris, preventing it from clogging pipes and causing blockages. The system comes with a stemball plug, which is easy to use and provides a secure seal to prevent leaks. 1.5" Basket Strainer Waste and Overflow 1.5" BSP Stemball Plug Durable and easy to install
The McAlpine CWU1A 1.25" urinal waste is a chrome plated plastic shower waste that features a 60mm chrome plated plastic flush flange and 1.5" tail and white plastic backknut. This urinal waste is suitable for use with most standard urinals and is a durable and reliable choice for any bathroom installation. The backnut design means that the waste can be tightened securely in place from underneath the urinal, ensuring a leak-free seal. Available with Chrome Plated Plastic or white plastic tail 1�" BSP 60mm Flush Flange 3�" Tail Manufactured in Polypropylene
McAlpine CW5 1.5" Backnut Bath Waste is designed to efficiently drain water from your bathtub, while preventing unwanted debris from clogging your pipes. The waste features a chrome plated plastic flange measuring 70mm in diameter and a 1.5"" tail that is unslotted. The chrome plated plastic plug is included with the waste to ensure a tight seal and prevent any water leaks. The backnut design means that the waste can be tightened securely in place from underneath the bath, ensuring a leak-free seal. Choice of Black PVC or Chrome Plated Plastic plug 1.5" BSP Chrome Plated plastic Backnut Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs 1.5" Tail
McAlpine HC2650UK-WH 50mm Water Seal Swivel Bath Trap and Overflow Assembly is used to connect the bath waste outlet to a drainage system, while also providing overflow protection. The 50mm water seal that helps prevent the escape of foul odours and gases from the drainage system. The swivel bath trap allows for easy installation and maintenance, whilst the overflow assembly provides protection against overflow incidents. 50mm Water Seal Outlet can be swivelled to make installation easier 1�" Universal Compression Outlet suits all plastic, copper and lead pipe Durable and easy to install
McAlpine 1�" Black Anti-Syphon adaptor whose valve neutralises negative syphonic pressure and eliminates gurgling. Can be used with a bottle trap on it's own. Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling Multifit Compression Outlet suits all plastic, copper and lead pipes AAV Trap Adaptor makes any Trap Anti-Syphon Manufactured in ABS Available in Black or White
McAlpine Shower trap and Flexible connector finished in Matt Black Brass is designed to provide efficient drainage for shower trays. The flexible connector provides flexibility for a variety of plumbing configurations. Suitable for shower trays with a 90mm waste hole With Flexible connector for ultimate flexibility to suit any angle 50mm Water Seal Shower Trap 1�" BSP Thread
McAlpine 1000mm Linear Shower Channel - Square Grid Pattern in Stainless Steel Available in 6 cover plate lengths from 548mm to 1148mm Choice of 3 finishes - simple brushed or polished metallic finish or a grid with a brushed finish. Highest quality grade 304 Stainless Steel cover plate Cover plate reversible to accommodate tiles up to 8mm Frame height adjustable to suit tiles up to 16mm
McAlpine 1000mm Linear Shower Channel - Brushed Stainless Steel Available in 6 cover plate lengths from 548mm to 1148mm Choice of 3 finishes - simple brushed or polished metallic finish or a grid with a brushed finish. Highest quality grade 304 Stainless Steel cover plate Cover plate reversible to accommodate tiles up to 8mm Frame height adjustable to suit tiles up to 16mm
McAlpine 600mm Linear Shower Channel - Square Grid Pattern in Stainless Steel Available in 6 cover plate lengths from 548mm to 1148mm Choice of 3 finishes - simple brushed or polished metallic finish or a grid with a brushed finish. Highest quality grade 304 Stainless Steel cover plate Cover plate reversible to accommodate tiles up to 8mm Frame height adjustable to suit tiles up to 16mm
McAlpine 700mm Linear Shower Channel - Square Grid Pattern in Stainless Steel Available in 6 cover plate lengths from 548mm to 1148mm Choice of 3 finishes - simple brushed or polished metallic finish or a grid with a brushed finish. Highest quality grade 304 Stainless Steel cover plate Cover plate reversible to accommodate tiles up to 8mm Frame height adjustable to suit tiles up to 16mm
McAlpine 900mm Linear Shower Channel - Square Grid Pattern in Stainless Steel Available in 6 cover plate lengths from 548mm to 1148mm Choice of 3 finishes - simple brushed or polished metallic finish or a grid with a brushed finish. Highest quality grade 304 Stainless Steel cover plate Cover plate reversible to accommodate tiles up to 8mm Frame height adjustable to suit tiles up to 16mm
The John guest 3/8” OD x 3/8” NPT push-to-connect to male valve is manufactured from white polypropylene and equipped with epdm o-rings utilizing John guest’s push-fit technology to make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique John guest collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.About this item
John guest push-to-connect technology provides a simple, reliable, leak-free connection
Manufactured from white polypropylene and equipped with EPDM o-rings
Can be used with plastic or soft Copper tubing
Manufactured with FDA compliant materials and NSF 61 and 51 certified
Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20�C. At elevated temperatures (50�C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV).
Flexible and robust LLDPE (Linear low density polyethylene) pipe
Suitable for air and pneumatics, cold, and intermittent hot water applications
Broad chemical compatibility
Colour coded for easy identification of service type
FDA and NSF certified.
Length - 10m
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20'C. At elevated temperatures (50'C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV).
Flexible and robust LLDPE (Linear low density polyethylene) pipe
Suitable for air and pneumatics, cold, and intermittent hot water applications
Broad chemical compatibility
Colour coded for easy identification of service type
FDA and NSF certified.
Length - 10m
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified.
Length - 5m
Pack of 1
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20�C. At elevated temperatures (50�C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified.
Length - 5m
Pack of 1
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20�C. At elevated temperatures (50�C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV).
Flexible and robust LLDPE (Linear low density polyethylene) pipe
Suitable for air and pneumatics, cold, and intermittent hot water applications
Broad chemical compatibility
Colour coded for easy identification of service type
FDA and NSF certified.
Length - 10m
Pack of 1
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20'C. At elevated temperatures (50'C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV).
Flexible and robust LLDPE (Linear low density polyethylene) pipe
Suitable for air and pneumatics, cold, and intermittent hot water applications
Broad chemical compatibility
Colour coded for easy identification of service type
FDA and NSF certified.
Length - 10m
Pack of 1
JG Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc.
The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Integral service valve for isolation with 1/4 turn screwdriver slot Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal cartridge with stainless steel teeth and main O-Ring seal Compatible with plastic or copper pipes (inserts required)
Suitable for hot and cold water only (6 Bar @ 65 �C)
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Helps make the pipe more rigid when a side load is applied
Suitable for hot and cold water and central heating systems
Ensure a secure and leak-free connection with the McAlpine 90mm x 1.25" 2 Piece Cast Iron Soil Pipe Boss Connector. Specially designed for use with traditional cast iron soil pipes, this high-performance connector allows for the safe integration of 1.25" waste pipes into a 90mm soil system.
The 2-piece design makes installation simple and precise, offering a tight, durable seal without the need for welding or specialist tools. Crafted for reliability and long-term performance, this boss connector is ideal for retrofitting or adapting older drainage systems to modern plumbing requirements. Trust McAlpine for quality, precision, and ease of use in all your plumbing installations.
