The McAlpine TUN-3CP is a plumbing component that is designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a one-piece side inlet Tun Dish with a ¾" inlet and a 19/23mm universal outlet, finished in chrome.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The one-piece design of the TUN-3CP with a side inlet makes it easy to install, and it is suitable for use in tight spaces where access may be limited.
The ¾" inlet is designed to connect to a standard washing machine or dishwasher hose, while the 19/23mm universal outlet is designed to connect to a wide range of waste pipes. This allows for easy connection to the existing waste system.
The McAlpine TUN-3CP is finished in chrome, giving it a modern and stylish appearance. It is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-3CP provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain, especially in tight spaces where access may be limited. The chrome finish also adds a stylish touch to any kitchen or utility room.
・ Available in White or Chrome Plated Plastic
The McAlpine TWLFCV is a screened breather, filter, and frost cover designed to prevent debris, insects, and frost from entering the waste system through the open end of a pipe. It features a compression joint that allows it to be easily connected to a waste pipe.
The TWLFCV is designed to fit onto the open end of a waste pipe and prevent debris, insects, and frost from entering the system. The screened breather allows air to flow freely into the system, preventing the buildup of pressure that can cause damage to the pipes. The filter prevents larger debris from entering the system, reducing the risk of blockages and other issues.
The frost cover helps to protect the system from damage caused by freezing temperatures, by preventing water from entering the system and expanding when it freezes. This helps to prevent pipes from bursting and other damage that can occur during freezing conditions.
The compression joint on the TWLFCV makes it easy to install and remove, allowing for quick and easy maintenance of the waste system. The joint ensures a secure and leak-free connection to the waste pipe, helping to prevent leaks and other issues that can occur with poorly connected components.
Overall, the McAlpine TWLFCV is a reliable and effective solution for preventing debris, insects, and frost from entering a waste system. Its screened breather and filter help to maintain airflow and prevent blockages, while its frost cover helps to protect the system from damage caused by freezing temperatures. The compression joint makes installation and maintenance quick and easy, ensuring a secure and leak-free connection to the waste pipe.
・ Available in 1¼" and 1½" sizes
The McAlpine UPSW-1 is a pumped shower waste outlet designed to provide efficient drainage for shower systems. It features a 70mm polished stainless steel flange with a plastic strainer grid, and a 15mm 'O' ring pushfit outlet.
The pumped shower waste outlet is designed to be used in situations where a gravity-fed waste system is not possible, such as in basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-1 features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm polished stainless steel flange provides a durable and stylish finish, and is suitable for use in a wide range of shower systems. The plastic strainer grid helps to prevent debris and other materials from entering the waste system, reducing the risk of blockages and other issues.
The 15mm 'O' ring pushfit outlet makes it easy to connect the pumped shower waste outlet to the waste pipe, ensuring a secure and leak-free connection. The outlet is designed for easy installation, and is suitable for use with a range of waste pipe materials.
Overall, the McAlpine UPSW-1 is a reliable and effective solution for situations where a gravity-fed waste system is not possible. Its built-in pump helps to ensure efficient and effective drainage, while its 70mm polished stainless steel flange and plastic strainer grid provide a durable and stylish finish. The 15mm 'O' ring pushfit outlet makes installation easy and ensures a secure and leak-free connection to the waste pipe.
・ 70mm polished Stainless Steel flange
・ Plastic strainer grid
・ 15mm 'O' ring pushfit outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
The McAlpine UPSW-2 is a pumped shower waste outlet designed to provide efficient drainage for shower systems. It features a 70mm chrome plated brass flange with top access and a 15mm plain tail outlet.
The pumped shower waste outlet is designed to be used in situations where a gravity-fed waste system is not possible, such as in basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-2 features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish, and is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, and the 15mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The pumped shower waste outlet is designed for easy installation, and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-2 is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 15mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 15mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine UPSW-2-22MM is a pumped shower waste outlet designed for efficient drainage of shower systems. It features a 70mm chrome plated brass flange with top access and a 22mm plain tail outlet.
The pumped shower waste outlet is ideal for use in situations where gravity-fed waste systems are not feasible, such as basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-2-22MM features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish that is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The pumped shower waste outlet is designed for easy installation and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-2-22MM is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 22mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine UPSW-3 is a pumped shower waste outlet that is designed for use in situations where gravity-fed waste systems are not practical. It features a 70mm chrome plated brass flange with top access and a 15mm plain tail outlet.
The UPSW-3 is ideal for use in situations where the waste outlet is located below the level of the waste pipe, such as basement showers. It features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish that is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, while the 15mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The UPSW-3 is designed for easy installation and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-3 is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 15mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 15mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine UPSW-3-22MM is a pumped shower waste outlet designed for use in situations where gravity-fed waste systems are not practical. It features a 70mm chrome plated brass flange with top access and a 22mm plain tail outlet.
Like the UPSW-3, this outlet is ideal for use in situations where the waste outlet is located below the level of the waste pipe, such as basement showers. The built-in pump helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish that is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, while the 22mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The UPSW-3-22MM is designed for easy installation and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-3-22MM is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 22mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine USG1-R125SS is an untrapped gully with a 22mm horizontal plain outlet. It is designed to be used in situations where there is no need for a water trap, such as in outdoor drainage systems.
The gully features a 125mm stainless steel grating which is designed to prevent debris and other materials from entering the drainage system. The grating can be easily removed for cleaning and maintenance, making it a practical and easy-to-use solution for outdoor drainage systems.
The 22mm horizontal plain outlet is designed to be connected to a waste pipe, and can be easily installed using standard plumbing techniques. The outlet is made from high-quality materials to ensure a durable and long-lasting connection to the waste pipe.
The USG1-R125SS is designed to be compatible with a range of different waste pipe materials, making it a versatile solution for a variety of outdoor drainage needs. It is also suitable for use in a range of different weather conditions, thanks to its durable stainless steel construction.
Overall, the McAlpine USG1-R125SS is a reliable and effective solution for untrapped outdoor drainage needs. Its stainless steel grating provides excellent debris protection, while its 22mm horizontal plain outlet makes it easy to connect to a waste pipe. The gully is easy to install and is made from high-quality materials, ensuring long-lasting durability and performance.
The McAlpine USG1SS is an untrapped gully designed for use with pumped waste systems. It features a 22mm horizontal plain outlet that is designed to be connected to a waste pipe using standard plumbing techniques.
The gully includes a clamp ring and cover plate that are designed to securely hold the waste pipe in place, ensuring a leak-free connection. This helps to prevent any wastewater from escaping and causing damage to surrounding areas.
The USG1SS is untrapped, which means that it does not include a water trap. This makes it ideal for use in pumped waste systems, where the pump is used to create enough pressure to force the wastewater through the pipe without the need for a water trap.
The gully also features a durable stainless steel construction, which makes it suitable for use in a variety of different weather conditions. The stainless steel construction also ensures that the gully is resistant to rust and corrosion, providing long-lasting durability and performance.
Overall, the McAlpine USG1SS is a reliable and effective solution for untrapped gully needs in pumped waste systems. Its 22mm horizontal plain outlet makes it easy to connect to a waste pipe, while its clamp ring and cover plate ensure a secure and leak-free connection. The gully's durable stainless steel construction ensures long-lasting durability and performance.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine USG1SS-SL-NSC is an untrapped gully designed for use with pumped waste systems. It features a 22mm horizontal plain outlet that is designed to be connected to a waste pipe using standard plumbing techniques.
The gully includes a clamp ring and cover plate that are designed to securely hold the waste pipe in place, ensuring a leak-free connection. This helps to prevent any wastewater from escaping and causing damage to surrounding areas.
The USG1SS-SL-NSC is untrapped, which means that it does not include a water trap. This makes it ideal for use in pumped waste systems, where the pump is used to create enough pressure to force the wastewater through the pipe without the need for a water trap.
The gully also features a durable stainless steel construction, which makes it suitable for use in a variety of different weather conditions. The stainless steel construction also ensures that the gully is resistant to rust and corrosion, providing long-lasting durability and performance.
In addition, the USG1SS-SL-NSC features a slot-in grating cover plate, which allows for easy access and maintenance of the gully. The cover plate can be easily removed for cleaning or inspection, making it a convenient solution for maintenance needs.
Overall, the McAlpine USG1SS-SL-NSC is a reliable and effective solution for untrapped gully needs in pumped waste systems. Its 22mm horizontal plain outlet makes it easy to connect to a waste pipe, while its clamp ring and cover plate ensure a secure and leak-free connection. The gully's durable stainless steel construction ensures long-lasting durability and performance, while the slot-in grating cover plate provides convenient maintenance access.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine USG1SS-SL-SC is an untrapped gully designed for use with pumped waste systems. It features a clamp ring and cover plate for easy installation and maintenance. The gully has a 22mm horizontal plain outlet and is made of stainless steel for durability and corrosion resistance. The "SL" in the product code refers to the "sound reducing" feature of the gully, which helps to reduce noise from water flow. The "SC" in the code refers to the "side connection" feature, which allows for a side inlet connection to the gully.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine USG1-T150SS is an untrapped gully designed for use with pumped waste systems. It features a tile/grating with removable grid for easy access and cleaning. The gully has a 22mm horizontal plain outlet and is made of stainless steel for durability and corrosion resistance. The "T150" in the product code refers to the size of the tile/grating, which measures 150mm x 150mm. The gully is suitable for use in wet rooms, shower areas, and other locations where water needs to be drained away.
・ Available with Polished Stainless Steel Tile with or without securing screws
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine USG1T6WH is a plumbing fixture designed to be used as a floor gully for draining wastewater from shower areas, wet rooms, or other similar spaces. It is made of high-quality, durable materials that are resistant to corrosion and chemical damage.
The gully features a 22mm horizontal plain outlet, which allows for easy and efficient drainage of wastewater. The outlet is designed to be compatible with standard plumbing fittings and pipework.
One of the key features of the McAlpine USG1T6WH is that it is untrapped. This means that there is no water trap or seal built into the fixture. While this can increase the risk of unpleasant odors and gases from the drainage system entering the room, it can also make it easier to maintain and clean the gully.
The McAlpine USG1T6WH is designed to be installed into a pre-formed floor, and it comes with a removable grate for easy access to the waste trap below. It is suitable for use with tiled or concrete floors, and it can be used in both residential and commercial settings.
Overall, the McAlpine Untrapped Gully with 22mm Horizontal Plain Outlet USG1T6WH is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas.
The McAlpine USG2-R125SS is a plumbing fixture that is designed to be used as a floor gully in wet room areas or shower areas. It features an untrapped gully with a 2" vertical outlet, making it suitable for use with standard 2" pipework.
The gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
One of the key features of the McAlpine USG2-R125SS is that it is untrapped, meaning that there is no water trap or seal built into the fixture. While this can increase the risk of unpleasant odors and gases from the drainage system entering the room, it can also make it easier to maintain and clean the gully.
The 2" vertical outlet on the gully is designed to be compatible with standard plumbing fittings and pipework, allowing for easy installation and connection to the existing drainage system.
The McAlpine USG2-R125SS is suitable for use with tiled or concrete floors and can be used in both residential and commercial settings. It is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas.
Overall, the McAlpine Untrapped Gully With 2" Vertical Outlet USG2-R125SS is a high-quality plumbing fixture that is designed to provide efficient and reliable drainage for wet room areas or shower areas.
The McAlpine USG2SS is a plumbing fixture that includes an untrapped gully, a clamp ring, a cover plate, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas and features a 2" vertical outlet.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. The absence of a water trap or seal in the gully means that odors and gases from the drainage system can enter the room, so it is important to ensure proper ventilation is in place.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2SS suitable for a variety of drainage systems.
Overall, the McAlpine USG2SS Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the socket reducer allows for easy connection to a variety of pipework, making it a versatile solution for a range of plumbing applications. However, the absence of a water trap or seal in the gully means that proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2SS-SL-NSC is a plumbing fixture that includes an untrapped gully, a clamp ring, a cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2SS-SL-NSC suitable for a variety of drainage systems.
Overall, the McAlpine USG2SS-SL-NSC Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the socket reducer allows for easy connection to a variety of pipework, making it a versatile solution for a range of plumbing applications. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2SS-SL-SC is a plumbing fixture that includes an untrapped gully, a clamp ring, a cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2SS-SL-SC suitable for a variety of drainage systems.
Overall, the McAlpine USG2SS-SL-SC Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the socket reducer allows for easy connection to a variety of pipework, making it a versatile solution for a range of plumbing applications. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2T6SS is a plumbing fixture that includes an untrapped gully, a tile/grating with a removable grid, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The tile/grating with a removable grid provides a stylish and functional finish to the gully. The removable grid makes cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2T6SS suitable for a variety of drainage systems.
Overall, the McAlpine USG2T6SS Untrapped Gully, Tile/Grating with Removable Grid, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the tile/grating with a removable grid provides a stylish and functional finish to the gully, while the socket reducer allows for easy connection to a variety of pipework. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with Polished Stainless Steel Tile with or without securing screws
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2T6WH is a plumbing fixture that includes an untrapped gully with a 2" vertical outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The 2" vertical outlet allows for easy connection to standard 2" pipework, making the McAlpine USG2T6WH suitable for a variety of drainage systems.
Overall, the McAlpine USG2T6WH Untrapped Gully with 2" Vertical Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The McAlpine USG2WH is a plumbing fixture that includes an untrapped gully, clamp ring, cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate provide a secure and stable installation of the gully. The cover plate is removable, making cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2WH suitable for a variety of drainage systems.
Overall, the McAlpine USG2WH Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG3-R1 is a plumbing fixture that includes an untrapped gully with a 1 1/2" horizontal outlet and a round tile. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The 1 1/2" horizontal outlet allows for easy connection to standard 1 1/2" pipework, making the McAlpine USG3-R1 suitable for a variety of drainage systems.
The round tile provides a decorative and functional finish to the gully, making it a suitable choice for wet room areas or shower areas with tiled floors.
Overall, the McAlpine USG3-R1 Untrapped Gully with 1 1/2" Horizontal Outlet and Round Tile is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The McAlpine USG3SS is a plumbing fixture that includes an untrapped gully, clamp ring, cover plate, and a 1½" horizontal outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The 1½" horizontal outlet allows for easy connection to standard 1½" pipework, making the McAlpine USG3SS suitable for a variety of drainage systems.
The clamp ring and cover plate provide a secure and stable installation of the gully. The cover plate is removable, making cleaning and maintenance of the gully easy and efficient.
Overall, the McAlpine USG3SS Untrapped Gully, Clamp Ring and Cover Plate, 1½" Horizontal Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 1½" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG3SS-SL-NSC is a plumbing fixture that includes an untrapped gully, clamp ring, cover plate, and a 1½" horizontal outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The 1½" horizontal outlet allows for easy connection to standard 1½" pipework, making the McAlpine USG3SS-SL-NSC suitable for a variety of drainage systems.
The clamp ring and cover plate provide a secure and stable installation of the gully. The cover plate is removable, making cleaning and maintenance of the gully easy and efficient.
Overall, the McAlpine USG3SS-SL-NSC Untrapped Gully, Clamp Ring and Cover Plate, 1½" Horizontal Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The SL in the product code indicates that it includes a stainless steel lid, and the NSC indicates that it is non-vented, which means that it does not have a venting pipe attached to it for the purpose of relieving air pressure in the drainage system. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 1½" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG3-T150SS Untrapped Gully is a plumbing fixture that includes a tile/grating with a removable grid and a 1½" horizontal outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The gully is untrapped, which means that it does not include a water trap to prevent odors and gases from the drainage system from entering the room. As a result, proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The tile/grating with a removable grid is designed to provide a stable and secure base for the gully while allowing for easy access to the waste trap below. The tile/grating is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity.
The 1½" horizontal outlet allows for easy connection to standard 1½" pipework, making the McAlpine USG3-T150SS suitable for a variety of drainage systems.
Overall, the McAlpine USG3-T150SS Untrapped Gully, Tile/Grating with Removable Grid, 1½" Horizontal Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The T150SS in the product code indicates that it includes a stainless steel lid. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
