The McAlpine TSG50-ANTI/LIG is a type of trapped gully used in plumbing and drainage systems. It has a 50mm water seal, which helps to prevent foul odors and gases from entering the building. The gully features a clamp ring and cover plate design, which provides a secure and watertight seal.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, allowing it to be connected to a range of piping systems. The horizontal outlet is designed for easy connection to a waste pipe, while the socket reducer provides a secure connection to the main drainage system.
The TSG50-ANTI/LIG is specifically designed to prevent the ingress of insects and other small creatures into the plumbing system. It features an anti-ligature design, which makes it difficult for objects or materials to be attached to the gully, reducing the risk of blockages and maintaining the integrity of the plumbing system.
Overall, the McAlpine TSG50-ANTI/LIG is a practical and reliable trapped gully that provides excellent performance and helps to maintain the health and safety of the building's occupants by preventing the ingress of foul odors, gases, and insects. Its anti-ligature design makes it particularly useful in environments where this is a concern, such as hospitals, mental health facilities, and other public buildings.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50-InnerCup is an accessory designed to fit inside the McAlpine TSG50 trapped gully. It is specifically designed to create a water-tight seal around the waste pipe, ensuring that no foul odors or gases escape into the building.
The InnerCup is made from a high-quality, durable material that is resistant to chemical corrosion and degradation. It has a 50mm seal, which is compliant with all relevant building codes and regulations. The InnerCup is easy to install, simply fitting inside the existing TSG50 trapped gully.
The InnerCup provides an additional layer of protection against the escape of foul odors and gases, making it an ideal accessory for use in high-traffic areas such as hospitals, schools, and public buildings. It is also suitable for use in residential and commercial properties, where it can help to maintain a safe and healthy living environment.
Overall, the McAlpine TSG50-InnerCup is a reliable and practical accessory that helps to improve the performance of the McAlpine TSG50 trapped gully. It is easy to install, durable, and compliant with all relevant regulations, making it an ideal choice for any plumbing or drainage system.
The McAlpine TSG50-R125SS is a 50mm water seal trapped gully that features a tile/grating with a removable grid. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The removable grid makes it easy to clean and maintain the trapped gully, ensuring that it remains in good working order for longer.
The TSG50-R125SS is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50-R125SS trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and easy-to-clean design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50SS-SL-NSC is a 50mm water seal trapped gully that features a clamp ring and cover plate design. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The clamp ring and cover plate design provides a secure and watertight seal, ensuring that the trapped gully remains in place and prevents any leaks.
The TSG50SS-SL-NSC is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50SS-SL-NSC trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and clamp ring and cover plate design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50T6WH is a 50mm water seal trapped gully that features a tile/grating with removable grid design. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The tile/grating with removable grid design provides easy access for cleaning and maintenance, ensuring that the trapped gully remains free from blockages and debris.
The TSG50T6WH is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50T6WH trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and tile/grating with removable grid design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
McAlpine White Plastic Cover Plate & Insert Tube For Gully Tsg50Wcover+Tube is a product manufactured by McAlpine, a leading supplier of plumbing and drainage products in the UK.
This product is designed for use with McAlpine TSG50 Trapped Gullies, which are commonly used in commercial and industrial drainage systems. The cover plate and insert tube are used to provide a clean and hygienic finish to the gully, and to prevent debris from entering the drain.
The cover plate is made from white plastic and is designed to fit over the top of the gully. It has a diameter of 160mm and is secured in place using screws. The insert tube is also made from white plastic and is designed to fit inside the gully to provide additional protection against debris.
Overall, McAlpine White Plastic Cover Plate & Insert Tube For Gully Tsg50Wcover+Tube is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems.
McAlpine TSG50WH-NSC 50mm Water Seal Trapped Gully is a plumbing product manufactured by McAlpine, a leading supplier of plumbing and drainage products in the UK.
This gully is designed for use in commercial and industrial drainage systems, and features a 50mm water seal to prevent foul odours from escaping through the drain. The gully also includes a clamp ring and cover plate to provide a secure and hygienic seal.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required.
Overall, the McAlpine TSG50WH-NSC 50mm Water Seal Trapped Gully is a reliable and durable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. It is easy to install and maintain, and is made from high-quality materials to ensure long-lasting performance.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52-R125SS Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required.
Overall, the McAlpine TSG52-R125SS Two Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52SS-SL-NSC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. Additionally, the gully includes a clamp ring and cover plate to provide a secure and hygienic seal.
Overall, the McAlpine TSG52SS-SL-NSC Two-Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and hygienic seal.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52SS-SL-SC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. Additionally, the gully includes a clamp ring and cover plate to provide a secure and hygienic seal.
Overall, the McAlpine TSG52SS-SL-SC Two-Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and hygienic seal. The only difference between this model and the McAlpine TSG52SS-SL-NSC is the type of cover plate used - the -SC model uses a screw-down cover plate, whereas the -NSC model uses a push-fit cover plate.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52-T150SS Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The grid tile or grating is designed to be used with a tiled or finished floor surface, providing a discreet and attractive finish.
Overall, the McAlpine TSG52-T150SS Two Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance. The tile/grating design also provides a discreet and attractive finish for tiled or finished floor surfaces.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52T6WH Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The grid tile or grating is designed to be used with a tiled or finished floor surface, providing a discreet and attractive finish.
The TSG52T6WH model also includes a 6mm tile upstand, which helps to prevent water from seeping under the tiles and causing damage to the subfloor. This can be particularly useful in wet areas such as bathrooms and showers.
Overall, the McAlpine TSG52T6WH Two Piece 50mm Water Seal Trapped Gully is a high-quality product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance. The tile/grating design also provides a discreet and attractive finish, and the inclusion of a 6mm tile upstand helps to prevent water damage to the subfloor.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52WH-NSC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The clamp ring and cover plate provide a secure and durable cover for the gully.
Overall, the McAlpine TSG52WH-NSC Two-Piece 50mm Water Seal Trapped Gully is a reliable and sturdy product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and durable cover for the gully. The removable grid allows for easy access to the trap for maintenance, and the 50mm water seal helps to prevent foul odours from escaping through the drain.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSGCONTVSS Conversion Kit is a plumbing product designed to convert any TSG1 or TSG2 gully into a sheet flooring gully. The kit includes a polished stainless steel clamp ring, cover plate, and dip tube.
The conversion kit is designed for use with sheet flooring, which is often used in commercial and industrial environments. The dip tube ensures that water is directed into the gully trap, while the polished stainless steel clamp ring and cover plate provide a secure and durable cover for the gully.
The TSGCONTVSS conversion kit is easy to install and can be used to upgrade existing gullies to accommodate sheet flooring. By using this kit, you can ensure that your drainage system is effective and efficient, while also providing a stylish and durable flooring solution for your commercial or industrial environment.
Overall, the McAlpine TSGCONTVSS Conversion Kit is a reliable and effective product that is designed to convert any TSG1 or TSG2 gully into a sheet flooring gully with a polished stainless steel finish. Its easy installation and durable construction make it an ideal solution for commercial and industrial environments where both functionality and style are important.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
The McAlpine Tiled to Sheet Floor Gully Conversion Kit Tsgcontvss-50 is a plumbing product designed to convert a tiled floor gully into a sheet flooring gully. The kit includes a polished stainless steel clamp ring, cover plate, and dip tube, and is designed for use with 50mm water seal trapped gullies.
The conversion kit is designed for use with sheet flooring, which is often used in commercial and industrial environments. The dip tube ensures that water is directed into the gully trap, while the polished stainless steel clamp ring and cover plate provide a secure and durable cover for the gully.
The TSGCONTVSS-50 conversion kit is easy to install and can be used to upgrade existing gullies to accommodate sheet flooring. By using this kit, you can ensure that your drainage system is effective and efficient, while also providing a stylish and durable flooring solution for your commercial or industrial environment.
Overall, the McAlpine Tiled to Sheet Floor Gully Conversion Kit Tsgcontvss-50 is a reliable and effective product that is designed to convert a tiled floor gully into a sheet flooring gully with a polished stainless steel finish. Its easy installation and durable construction make it an ideal solution for commercial and industrial environments where both functionality and style are important.
The McAlpine White Plastic Sheet Floor to Tiled Floor Gully Conversion Kit Tsgc is a plumbing product designed to convert a sheet flooring gully into a tiled floor gully. The kit includes a white plastic clamp ring, cover plate, and dip tube, and is designed for use with 50mm water seal trapped gullies.
The conversion kit is designed for use with tiled flooring, which is often used in residential and commercial environments. The dip tube ensures that water is directed into the gully trap, while the white plastic clamp ring and cover plate provide a secure and durable cover for the gully.
The TSGC conversion kit is easy to install and can be used to upgrade existing gullies to accommodate tiled flooring. By using this kit, you can ensure that your drainage system is effective and efficient, while also providing a stylish and durable flooring solution for your residential or commercial environment.
Overall, the McAlpine White Plastic Sheet Floor to Tiled Floor Gully Conversion Kit Tsgc is a reliable and effective product that is designed to convert a sheet flooring gully into a tiled floor gully with a white plastic finish. Its easy installation and durable construction make it an ideal solution for residential and commercial environments where both functionality and style are important.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
The McAlpine White Stainless Steel Sheet Floor To Tiled Floor Gully Conversion Kit Tsgconvss is a product designed to convert a floor gully with a stainless steel sheet finish to a tiled floor gully. The kit includes a gully body, a tile frame, a tile frame seal, and a removable grid. It is made from high-quality stainless steel and is designed for use in wet rooms, shower areas, and other wet environments.
To install the kit, the existing gully body with the stainless steel sheet finish is removed and replaced with the new gully body provided in the kit. The tile frame is then inserted into the new gully body, and the tile frame seal is used to seal the joint between the tile frame and the tiled floor. Finally, the removable grid is inserted into the tile frame.
The McAlpine White Stainless Steel Sheet Floor To Tiled Floor Gully Conversion Kit Tsgconvss is a useful product for those who are looking to upgrade their wet room or shower area to a more modern and stylish look. It is easy to install and is made from high-quality materials that are built to last.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
The McAlpine Dust Guard Cover is designed to fit over the McAlpine TSGDUSTGUARD, which is a unique, self-sealing waste valve that prevents foul odours and insects from entering the room via the waste pipe. The Dust Guard Cover is a protective cover that fits over the valve to prevent dust and debris from accumulating on it and potentially affecting its performance.
The Dust Guard Cover is made from a durable, easy-to-clean plastic material and is designed to be easily removable for cleaning and maintenance. It is also designed to be compatible with most standard waste pipes and can be used in a variety of commercial and residential applications.
If you have a McAlpine TSGDUSTGUARD waste valve installed in your plumbing system, the Dust Guard Cover is a simple and effective way to protect it from dust and debris. It is a cost-effective solution that can help extend the life of your waste valve and prevent costly repairs down the line.
The McAlpine TSG-Innercup is a replacement inner cup for the McAlpine TSG1 waste valve. The TSG1 waste valve is a self-sealing waste valve that prevents foul odours and insects from entering the room via the waste pipe. The inner cup is a crucial component of the waste valve, as it forms a tight seal around the waste pipe and prevents any leakage.
Over time, the inner cup may become worn or damaged, which can compromise the effectiveness of the waste valve. The McAlpine TSG-Innercup is designed to be a direct replacement for the original inner cup, ensuring that the waste valve continues to operate at peak performance.
The TSG-Innercup is made from a durable, high-quality rubber material that is designed to withstand the harsh conditions of plumbing systems. It is easy to install and can be done with minimal tools and experience.
If you have a McAlpine TSG1 waste valve installed in your plumbing system and notice any signs of leakage or odours, it may be time to replace the inner cup. The TSG-Innercup is a reliable replacement option that can help extend the life of your waste valve and prevent costly repairs down the line.
The McAlpine TSGSTOP Stopper is a versatile accessory for use with several McAlpine Trapped Shower Gully Dip Tubes models, including the TSG1, TSG50, TSG52, and TSG2. The stopper is designed to be used with the dip tube to provide a watertight seal that prevents water from flowing down the waste pipe and into the drainage system.
The TSGSTOP Stopper is made from a durable rubber material that is designed to withstand the harsh conditions of plumbing systems. It is easy to install and can be done with minimal tools and experience. The stopper fits snugly into the dip tube, creating a watertight seal that prevents any leakage.
If you have a McAlpine Trapped Shower Gully Dip Tube installed in your plumbing system and need to stop the flow of water, the TSGSTOP Stopper is an excellent option. It is compatible with multiple McAlpine models, making it a versatile accessory to have on hand. Additionally, it is a cost-effective solution that can help prevent costly repairs down the line by ensuring that your plumbing system remains leak-free.
・ When after installation the Gully is not going to be used there is a possibility that the water seal will evaporate. The Stopper when inserted into the Dip Tube will prevent foul air entering the building
・ For use with Trapped Shower Gullies TSG1, TSG50, TSG52 and TSG2 models only, either sheet flooring or tiled floor versions.
The McAlpine White Plastic Cover Plate & Insert Tube Tsgwcover+Tube is a plumbing component designed to provide a neat and tidy finish to a wall or floor-mounted waste pipe. It consists of a white plastic cover plate and an insert tube, both of which are made from durable and high-quality materials.
The cover plate is designed to be screwed or glued onto a wall or floor surface to conceal the waste pipe and create a clean and finished look. The insert tube is designed to fit inside the waste pipe, providing additional support and preventing blockages.
This product is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings, and is easy to install and maintain.
The McAlpine TT10 is a plumbing component that is designed to be used as a water trap for waste pipes, typically in kitchen or utility room applications. Specifically, it is a 75mm water seal running tubular 'P' trap with a 1½" Multifit Outlet and a plain spigot end for connection to a waste disposal unit.
The trap is designed to prevent unpleasant odors from entering a room by trapping a small amount of water in the bend of the 'P' trap. This creates a water seal that prevents sewer gases from entering the room. The 75mm water seal running tubular design of the trap ensures that it can handle high volumes of waste water while maintaining an effective water seal.
The 1½" Multifit Outlet allows for easy and secure connection to a wide range of waste pipes, while the plain spigot end is designed to connect directly to a waste disposal unit. The trap is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability.
Overall, the McAlpine TT10 is a reliable and effective plumbing component that is suitable for use in a wide range of applications, and is easy to install and maintain.
・ 75mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for connection to most waste disposal units
・ Available as Anti-Syphon (Silentrap). Add suffix "V" to product code
・ Manufactured in polypropylene
The McAlpine TUN-1 is a plumbing component designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a 1½" Tun Dish with a ¾" Pushfit Outlet.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The 1½" size of the dish is a standard size for waste pipes, which allows for easy connection to the existing waste system.
The ¾" Pushfit Outlet is designed to connect to a flexible waste pipe, which is then connected to the main waste system. This connection is designed to be easy to install and remove, allowing for easy maintenance and cleaning.
The McAlpine TUN-1 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-1 provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain.
The McAlpine TUN-3 is a plumbing component that is designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a one-piece side inlet Tun Dish with a ¾" inlet and a 19/23mm universal outlet.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The one-piece design of the TUN-3 with a side inlet makes it easy to install, and it is suitable for use in tight spaces where access may be limited.
The ¾" inlet is designed to connect to a standard washing machine or dishwasher hose, while the 19/23mm universal outlet is designed to connect to a wide range of waste pipes. This allows for easy connection to the existing waste system.
The McAlpine TUN-3 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-3 provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain, especially in tight spaces where access may be limited.
・ Available in White or Chrome Plated Plastic
