The McAlpine H11M Multifit Straight Tank Connector is a versatile plumbing component designed to connect a variety of different pipes and tanks. It is suitable for use with plastic or copper pipes and can be used in a variety of applications, including rainwater harvesting systems.
The connector is designed to provide a secure and reliable seal between the pipe and the tank, preventing any leaks or water damage. It is made from high-quality materials and is designed to withstand the rigors of outdoor use.
The McAlpine H11M Multifit Straight Tank Connector features a multifit design that allows it to be used with a range of pipe sizes, making it a flexible and convenient option for plumbers and DIY enthusiasts. It can be used with 1½" or 2" pipes and features a ¾" threaded outlet for easy connection to other pipework.
When installing the McAlpine H11M Multifit Straight Tank Connector, it is important to ensure that the tank and surrounding area are clean and free from debris. The connector should be tightened securely using appropriate tools, and any excess sealant should be wiped away.
Overall, the McAlpine H11M Multifit Straight Tank Connector is a reliable and versatile option for connecting pipes and tanks in a range of applications. Its multifit design and high-quality materials make it a popular choice among plumbers and DIY enthusiasts alike.
・ Available in ¾", 1", 1¼", 1½" and 2" sizes
・ WRAS approved
The McAlpine GWU20 is a 2" urinal waste with an 85mm plastic domed flange and a 42mm tail with a backnut model. It is designed for use in commercial or public restrooms where urinals are installed.
The 2" diameter of the waste pipe is suitable for handling the larger volume of water and waste that is produced by urinals. The 85mm plastic domed flange provides a secure and watertight seal between the waste pipe and the floor or wall, preventing any leaks or water damage.
The removable dome on the flange makes it easy to access and clean the waste pipe, while the backnut model allows for easy installation and removal of the waste pipe as needed. The 42mm tail of the waste pipe is designed to connect to standard plumbing fixtures and pipes, making it easy to integrate into existing plumbing systems.
When installing the McAlpine GWU20 urinal waste, it is important to follow the manufacturer's instructions carefully and use appropriate tools and materials. The waste pipe should be securely fastened and any excess sealant or debris should be cleaned away to ensure a reliable and leak-free installation.
Overall, the McAlpine GWU20 urinal waste is a reliable and durable option for use in commercial or public restrooms where urinals are installed.
・ Available with grey or white plastic tail
・ 2" BSP
・ 85mm Domed Flange with removable dome
・ Removable dome with 42mm tail
・ Manufactured in Polypropylene
The McAlpine FTC1AWH is a bent tank connector with a ¾" BSP threaded outlet. It is designed for use with plastic tanks and is commonly used in rainwater harvesting systems.
The bent design of the connector allows it to be used in tight spaces, and the ¾" BSP threaded outlet provides a secure and reliable connection to other pipework. The connector is made from high-quality materials and is designed to withstand the rigors of outdoor use.
When installing the McAlpine FTC1AWH, it is important to ensure that the tank and surrounding area are clean and free from debris. The connector should be tightened securely using appropriate tools, and any excess sealant should be wiped away.
Overall, the McAlpine FTC1AWH is a reliable and durable tank connector that is suitable for use in a range of rainwater harvesting systems.
・ ¾" BSP Threaded Outlet
The McAlpine FGT150TOP is a 150mm square polished stainless steel tile with a removable grid and ABS adaptor. It is designed and manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The FGT150TOP is designed to be used as part of a floor gully system in a bathroom or wet room. The removable grid allows for easy access to the gully for cleaning and maintenance, while the ABS adaptor allows for a secure connection to the drainage system.
The polished stainless steel finish provides a sleek and modern look, making it a popular choice for contemporary bathroom designs. The tile is also designed to be durable and long-lasting, providing reliable performance for years to come.
Overall, the McAlpine FGT150TOP is a high-quality and reliable component of a floor gully system. Its removable grid and ABS adaptor make it easy to install and maintain, while the polished stainless steel finish adds a stylish touch to any bathroom or wet room.
・ Tile has a removable ABS Spigot Adaptor for solvent welding to Clamp Ring
・ If the spigot adaptor is removed, then the rubber gasket can fit inside 110mm pipe
The McAlpine CONVALVE-125P Convalve Non-Return Valve is a plumbing fitting designed to prevent backflow in a pressurized hot water system. It is manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The CONVALVE-125P model features a ¼" plain tail inlet and a ¼" universal outlet, which allows it to take pressure-relief discharge from pressurized hot water cylinders. The non-return valve design prevents water from flowing back into the cylinder, which can help to protect the system and prevent damage from overpressure or overheating.
The valve is constructed of high-quality materials and is designed to provide reliable and long-lasting performance. The ¼" universal outlet is compatible with a range of different plumbing systems, making it a versatile option for different types of installations.
Overall, the McAlpine CONVALVE-125P Convalve Non-Return Valve is a reliable and effective solution for preventing backflow in a pressurized hot water system. It is suitable for use in both residential and commercial plumbing systems and can help to prevent potential damage and water wastage.
The McAlpine CONTRAP2 Straight Socket Condensation Trap is a plumbing fitting used to prevent condensation from entering a building's drainage system. It is designed and manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The straight socket condensation trap has a 19/23mm condensation drain off connection, which allows for the safe and effective drainage of condensation from a wide range of different appliances or systems, including air conditioning units, boilers, and refrigeration systems.
The CONTRAP2 model is designed to be installed in a straight run of 32mm (1 1/4") solvent weld pipe, and it can be easily fitted in a vertical or horizontal orientation. The trap includes a removable seal that can be cleaned to maintain the trap's effectiveness and prevent blockages.
Overall, the McAlpine CONTRAP2 Straight Socket Condensation Trap is a reliable and effective solution for preventing condensation from entering a building's drainage system. It is suitable for use in both residential and commercial plumbing systems and can help to prevent potential water damage and the growth of harmful bacteria.
・ Straight Socket Connector to 110mm or 125mm pipe (commonly used as ducting for basic air extraction systems)
・ Provides an internal trap/diverter which will collect condensation forming on the internal surface of the extract pipework
・ 19/23mm connection to allow for drain off of the condensation to a convenient position
The McAlpine Five O Rings for Shower Traps are replacement O-rings for McAlpine shower traps. They are designed and manufactured by McAlpine, a UK-based company that specializes in plumbing products.
O-rings are a type of mechanical seal that are used to prevent leaks between two surfaces. In the case of shower traps, O-rings are used to provide a watertight seal between the shower tray and the waste pipe. Over time, O-rings can become worn or damaged, leading to leaks and potential water damage.
The McAlpine Five O Rings for Shower Traps are designed to be a direct replacement for the O-rings that come with McAlpine shower traps. The pack contains five O-rings, providing enough to replace multiple O-rings or to have spares on hand for future use.
Overall, the McAlpine Five O Rings for Shower Traps are a reliable and convenient replacement part that can help to ensure the continued effectiveness of your shower trap. They are suitable for use in both residential and commercial plumbing systems.
・ Mounted on Card with Hanging Slot
・ Five Rubber 'O' Rings for Shower Trap Dip Tube
・ Manufactured in Rubber
The McAlpine Straight Connector 1 1/2" Multifit X 2" Bsp Male Thread Zt31M is a plumbing fitting used for connecting different types of pipes together. It is designed and manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The straight connector has a 1 1/2" multifit inlet, which allows for connection to a range of different pipe materials and sizes. The multifit inlet is designed to provide a flexible and adaptable solution for connecting pipes of different materials and sizes, making it a versatile option for different plumbing systems.
The outlet of the connector is a 2" BSP male thread, which is a type of thread commonly used in plumbing systems. The BSP male thread allows for secure connections between pipes, valves, or other plumbing components that have 2-inch BSP female threads.
The Zt31M refers to the specific model number of this particular fitting. It is made of high-quality materials, ensuring durability and reliability.
Overall, the McAlpine Straight Connector 1 1/2" Multifit X 2" Bsp Male Thread Zt31M is a versatile and reliable plumbing fitting that can be used to ensure leak-free connections in your pipework installations. It is suitable for a range of different applications, including in industrial, commercial, or residential plumbing systems.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine Straight Connector 1 1/4" Multifit X 2" Bsp Thread Zs31M is a plumbing fitting used for connecting different types of pipes together. It is designed and manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The straight connector has a 1 1/4" multifit inlet, which allows for connection to a range of different pipe materials and sizes. The multifit inlet is designed to provide a flexible and adaptable solution for connecting pipes of different materials and sizes, making it a versatile option for different plumbing systems.
The outlet of the connector is a 2" BSP thread, which is a type of thread commonly used in plumbing systems. The BSP thread allows for secure connections between pipes, valves, or other plumbing components that have 2-inch BSP threads.
The Zs31M refers to the specific model number of this particular fitting. It is made of high-quality materials, ensuring durability and reliability.
Overall, the McAlpine Straight Connector 1 1/4" Multifit X 2" Bsp Thread Zs31M is a versatile and reliable plumbing fitting that can be used to ensure leak-free connections in your pipework installations. It is suitable for a range of different applications, including in industrial, commercial, or residential plumbing systems.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine ZP10 75mm Water Seal Tubular Swivel All One Trap with Multifit Outlet is a plumbing trap used to prevent odors and gases from entering a building through a drainage system. It is designed and manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The trap has a 75mm water seal, which provides a barrier between the drainage system and the building. The water seal prevents gases and odors from traveling back up the pipe and into the building, ensuring that the indoor air quality is maintained.
The trap is designed with a tubular swivel, which allows for easy installation in a range of different plumbing configurations. The multifit outlet allows for connection to a variety of different pipe sizes and materials, making it a versatile and adaptable solution for different plumbing systems.
Overall, the McAlpine ZP10 75mm Water Seal Tubular Swivel All One Trap with Multifit Outlet is a reliable and effective plumbing trap that is designed to ensure the safety and comfort of building occupants. It can be used in a range of different plumbing applications, including in residential, commercial, and industrial settings.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Trap outlet can be swiveled in to 'P', 'S' or 'Q' position
The McAlpine 2" Multifit Loose Nut Z8M is a plumbing fitting used for connecting different types of pipes together. It is made by McAlpine, a UK-based company that specializes in plumbing products.
The Multifit Loose Nut Z8M is designed to be used with a range of different pipe materials including PVC, copper, and iron. The fitting has a 2-inch diameter and is made of high-quality materials, ensuring durability and reliability.
The loose nut design allows for easy installation and removal, making it a convenient option for plumbing professionals and DIY enthusiasts. It can be used in a variety of applications, such as in industrial, commercial, or residential plumbing systems.
The Z8M refers to the specific model number of this particular fitting. It is part of McAlpine's Multifit range, which is designed to provide a flexible and adaptable solution for connecting pipes of different materials and sizes.
Overall, the McAlpine 2" Multifit Loose Nut Z8M is a versatile and reliable plumbing fitting that can be used to ensure leak-free connections in your pipework installations.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine 2" Bsp Nut Z8A is a plumbing fitting used in pipework installations. It is made of high-quality materials and has a 2-inch BSP thread size. The BSP thread is a type of thread used in plumbing and stands for British Standard Pipe.
The Z8A refers to the specific model number of this particular nut, which is made by McAlpine, a UK-based company that specializes in plumbing products.
The purpose of this nut is to provide a secure connection between pipes, valves, or other plumbing components that have 2-inch BSP threads. It can be used in a variety of applications, such as in industrial, commercial, or residential plumbing systems.
Overall, the McAlpine 2" Bsp Nut Z8A is a reliable and durable plumbing fitting that can be used to ensure leak-free connections in your pipework installations.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine 2" Frosat Protection Dip Tube Bend Z5M is a plumbing fitting designed to protect the waste water trap from freezing in low temperatures. It is part of McAlpine's Frosat Protection range, which is designed to prevent the damage caused by freezing waste pipes and traps.
The dip tube bend is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. It is designed to be inserted into the waste pipe trap to prevent water from freezing, which could cause damage to the trap or block the pipe.
The Z5M dip tube bend is easy to install, with its Multifit design making it compatible with a wide range of different waste pipe trap sizes. It is also easy to remove, making it a convenient option for repairs or maintenance.
Overall, the McAlpine 2" Frosat Protection Dip Tube Bend Z5M is a high-quality, reliable and durable plumbing fitting that provides protection against freezing waste pipes and traps. Its compatibility with a wide range of waste pipe trap sizes and easy installation and removal make it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine 2" Surefit 90 Degree Bend Z4L is a plumbing fitting designed to connect two pipes of the same size at a 90-degree angle. It is part of McAlpine's Surefit range, which means it is compatible with a wide range of different pipe materials including plastic, copper, and iron.
The 90-degree bend is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. It is designed to provide a secure and watertight connection between two pipes, preventing any leaks or water damage that could occur if the pipes were not properly connected.
The Z4L 90-degree bend is easy to install, with its Surefit design making it easy to connect to pipes of the same size. It is also easy to remove, making it a convenient option for repairs or maintenance.
Overall, the McAlpine 2" Surefit 90 Degree Bend Z4L is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight connection between two pipes of the same size at a 90-degree angle. Its compatibility with a wide range of pipe materials and easy installation and removal make it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 2" Surefit Pipe Clip Z30 is a plumbing fitting designed to securely hold and support pipes of the same size. It is part of McAlpine's Surefit range, which means it is compatible with a wide range of different pipe materials including plastic, copper, and iron.
The pipe clip is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. It is designed to provide a secure and stable mounting point for pipes, preventing any movement or vibration that could cause damage to the pipes or fittings.
The Z30 pipe clip is easy to install, with its Surefit design making it easy to connect to pipes of the same size. It is also easy to adjust or remove, making it a convenient option for repairs or maintenance.
Overall, the McAlpine 2" Surefit Pipe Clip Z30 is a high-quality, reliable and durable plumbing fitting that provides a secure and stable mounting point for pipes of the same size. Its compatibility with a wide range of pipe materials and easy installation and removal make it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 2" Surefit Straight Connector Z28L is a plumbing fitting designed to connect two pipes of the same size in a straight line. It is part of McAlpine's Surefit range, which means it is compatible with a wide range of different pipe materials including plastic, copper, and iron.
The straight connector is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. It is designed to provide a secure and watertight connection between two pipes, preventing any leaks or water damage that could occur if the pipes were not properly connected.
The Z28L straight connector is easy to install, with its Surefit design making it easy to connect to pipes of the same size. It is also easy to remove, making it a convenient option for repairs or maintenance.
Overall, the McAlpine 2" Surefit Straight Connector Z28L is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight connection between two pipes of the same size. Its compatibility with a wide range of pipe materials and easy installation and removal make it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine Z23MR Temporary Blanking Off Cap is a plumbing fitting designed to provide a temporary seal for waste pipes. It is part of McAlpine's Multifit range, which means it is compatible with a wide range of different pipe materials including plastic, copper, and iron.
The temporary cap is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. It is designed to provide a secure seal for waste pipes that need to be temporarily closed off for maintenance or repairs.
The Z23MR temporary cap is easy to install and remove, making it a convenient option for temporary closures. It is ideal for use in situations where a permanent cap or seal is not required, such as during maintenance or repairs.
Overall, the McAlpine Z23MR Temporary Blanking Off Cap is a high-quality, reliable and convenient plumbing fitting that provides a temporary seal for waste pipes. Its compatibility with a wide range of pipe materials and easy installation and removal make it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Manufactured in synthetic rubber
The McAlpine Z23M Multifit Blank Cap is a plumbing fitting designed to seal off an unused or open pipe end. It is part of McAlpine's Multifit range, which means it is compatible with a wide range of different pipe materials including plastic, copper, and iron. Unlike the Z23 Blank Cap with nut, the Z23M does not come with a nut for installation.
The blank cap is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The cap is designed to provide a secure and watertight seal, preventing any leaks or water damage that could occur if a pipe end is left open.
The Z23M blank cap is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is easy to install, with its Multifit design making it compatible with a wide range of pipe materials and fittings. It is also simple to remove, making it a convenient option for temporary closures.
Overall, the McAlpine Z23M Multifit Blank Cap is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal for unused or open pipe ends. Its compatibility with a wide range of pipe materials and fittings, along with its easy installation and removal, make it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The McAlpine Z23L 2" Surefit Blank Cap is a plumbing fitting designed to seal off an unused or open pipe end. It features the Surefit system, which is a unique combination of flexible fins and internal bushes that allow for a secure and watertight connection without the need for solvent welding or tightening.
The Z23L blank cap is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The cap is designed to provide a secure and watertight seal, preventing any leaks or water damage that could occur if a pipe end is left open.
The blank cap is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is compatible with other 2" Surefit fittings and pipes, and its simple design makes it easy to install and remove.
Overall, the McAlpine Z23L 2" Surefit Blank Cap is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal for unused or open pipe ends. It is easy to install, compatible with a range of other fittings and pipes, and its unique Surefit system ensures a tight seal that is reliable and easy to use, making it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine Z21A 2" Multifit Caulking Ferrule is a plumbing fitting designed to provide a secure and watertight seal around a 2" pipe. It is a multifit fitting, meaning it can be used with a range of different pipe materials, including plastic, copper, and iron.
The caulking ferrule is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. It features a rubber gasket that provides a secure and watertight seal, and can be easily installed using a caulking gun or similar tool.
The Z21A multifit caulking ferrule is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is capable of handling the demands of high-flow water systems, and its simple design makes it easy to clean and maintain.
Overall, the McAlpine Z21A 2" Multifit Caulking Ferrule is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal around a 2" pipe. It is easy to install, compatible with a range of different pipe materials, and is a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine Z18M Surefit Straight Connector is a plumbing fitting designed to connect two sections of pipe, specifically between a 2" pipe and a soil pipe boss with a BS EN 1451-1:2000 size. It features the Surefit system, which is a unique combination of flexible fins and internal bushes that allow for a secure and watertight connection without the need for solvent welding or tightening.
The Z18M straight connector is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The Surefit system ensures a tight seal that is reliable and easy to install, making it a popular choice for both professional and DIY plumbers.
The connector is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is capable of handling the demands of high-flow water systems, and its simple design makes it easy to clean and maintain.
Overall, the McAlpine Z18M Surefit Straight Connector is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal between a 2" pipe and a soil pipe boss with a BS EN 1451-1:2000 size. It is easy to install, compatible with a range of other fittings and pipes, and is a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Connects to BS 5244 size but can be manufacturee on request to BS 5255
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine Z18L Surefit Straight Connector is a plumbing fitting designed to connect two sections of 2" pipe in a straight line. It features the Surefit system, which is a unique combination of flexible fins and internal bushes that allow for a secure and watertight connection without the need for solvent welding or tightening.
The Z18L straight connector is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The Surefit system ensures a tight seal that is reliable and easy to install, making it a popular choice for both professional and DIY plumbers.
The connector is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is capable of handling the demands of high-flow water systems, and its simple design makes it easy to clean and maintain.
Overall, the McAlpine Z18L Surefit Straight Connector is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in plumbing systems. It is easy to install, compatible with a range of other fittings and pipes, and is a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine Z1 90° Bend is a plumbing fitting designed to connect two sections of pipe at a 90-degree angle. It features a BSP (British Standard Pipe) male thread on one end and a BSP coupling nut on the other end.
The Z1 bend is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The BSP male thread allows for easy connection to other BSP fittings or pipes, while the BSP coupling nut provides a secure and watertight seal.
The 90-degree angle of the bend is suitable for a range of plumbing installations, including those in tight spaces where a straight connection is not possible. The Z1 bend is commonly used in both domestic and commercial plumbing systems, and is capable of handling the demands of high-flow water systems.
Overall, the McAlpine Z1 90° Bend - BSP Male Thread x BSP Coupling Nut is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in plumbing systems. It is easy to install and compatible with a range of other fittings and pipes, making it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine X10A 75mm Water Seal Straight Through Trap is a plumbing fitting designed to be used in various types of plumbing systems, including sinks, baths, and shower systems. It features a 75mm water seal, a multifit outlet, and two cleaning eyes.
The trap is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The 75mm water seal ensures that sewer gases do not enter the room, providing a hygienic and safe environment.
The multifit outlet allows the trap to be used with a range of different pipes and fittings, making it a versatile choice for plumbing installations. The two cleaning eyes provide easy access to the trap for cleaning and maintenance, helping to keep the system running smoothly and preventing blockages.
The straight through design of the trap allows for easy installation and provides an unobstructed flow of water, helping to prevent buildup of debris and blockages. The X10A trap is suitable for use in both domestic and commercial plumbing systems, and is capable of handling the demands of high-flow water systems.
Overall, the McAlpine X10A 75mm Water Seal Straight Through Trap with Multifit Outlet and Two Cleaning Eyes is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in plumbing systems. It is easy to install and maintain, making it a popular choice for both professional and DIY plumbers.
・ 1¼" Inlet and choice of 1¼" or 1½" Outlet
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Includes 2 Cleaning Eyes
・ Inlet and outlet connections are directly in-line allowing for neat plumbing behind basin pedestals
The McAlpine WU20 2" Urinal Waste is a plumbing fitting designed for use in urinal systems. It features an 85mm plastic domed flange with a removable dome and a 42mm tail with a backnut model for easy installation.
The WU20 waste is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in urinal systems. The domed flange provides a neat and tidy finish that is suitable for a wide range of bathroom designs.
The 42mm tail of the waste is designed to fit into standard sized pipes and provides a secure and watertight seal to prevent leaks. The backnut model of the waste makes it easy to install and remove as needed, allowing for simple maintenance and repairs.
The WU20 urinal waste is suitable for use in both domestic and commercial urinal systems, and is capable of handling the demands of high-flow water systems. It is compatible with a range of urinal fixtures and wall surfaces, making it a versatile and reliable choice for any urinal installation.
The removable dome on the WU20 waste makes it easy to clean and maintain, and allows for access to the waste for clearing blockages or debris buildup.
Overall, the McAlpine WU20 2" Urinal Waste is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in urinal systems. It is easy to install and maintain, making it a popular choice for both professional and DIY plumbers.
・ Available with grey or white plastic tail
・ 2" BSP
・ 85mm Domed Flange with removable dome
・ Removable dome with 42mm tail
・ Manufactured in Polypropylene
The McAlpine WU1S 1¼" Urinal Waste is a plumbing fitting designed for use in urinal systems. It features a 60mm flush flange and a 56mm tail with a backnut model for easy installation.
The WU1S waste is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in urinal systems. The flush flange provides a neat and tidy finish that is suitable for a wide range of bathroom designs.
The 56mm tail of the waste is designed to fit into standard sized pipes and provides a secure and watertight seal to prevent leaks. The backnut model of the waste makes it easy to install and remove as needed, allowing for simple maintenance and repairs.
The WU1S urinal waste is suitable for use in both domestic and commercial urinal systems, and is capable of handling the demands of high-flow water systems. It is compatible with a range of urinal fixtures and wall surfaces, making it a versatile and reliable choice for any urinal installation.
Overall, the McAlpine WU1S 1¼" Urinal Waste is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in urinal systems. It is easy to install and maintain, making it a popular choice for both professional and DIY plumbers.
・ Available with Chrome Plated Plastic or white plastic tail
・ 1¼" BSP
・ 60mm Flush Flange
・ 2"" Tail
・ Manufactured in Polypropylene
The McAlpine WS5 1½" Shower Waste is a plumbing fitting designed for use in shower systems. It features a 70mm white plastic flange and a 1½" tail with a backnut model for easy installation.
The WS5 waste is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in shower systems. The white plastic flange provides a neat and tidy finish that is suitable for a wide range of bathroom designs.
The 1½" tail of the waste is designed to fit into standard sized pipes and provides a secure and watertight seal to prevent leaks. The backnut model of the waste makes it easy to install and remove as needed, allowing for simple maintenance and repairs.
The WS5 shower waste is suitable for use in both domestic and commercial shower systems, and is capable of handling the demands of high-flow water systems. It is compatible with a range of shower trays and floor surfaces, making it a versatile and reliable choice for any shower installation.
Overall, the McAlpine WS5 1½" Shower Waste is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in shower systems. It is easy to install and maintain, making it a popular choice for both professional and DIY plumbers.
・ 1½" BSP
・ 70mm White Plastic flange
・ White plastic Backnut
・ 1½" Tail
・ Manufactured in Polypropylene
The McAlpine WP4T is a high-quality white PVC plug designed for use in plumbing applications. The plug has a diameter of 1 3/4 inches and is made from durable PVC material that is resistant to corrosion and chemical damage. The plug is designed to fit snugly into standard sized pipes to provide a watertight seal.
One of the key features of the WP4T plug is its triangle shape, which allows for easy installation and removal with a suitable tool. The triangle shape also provides a secure grip for the plug, making it easy to tighten and remove as needed.
This plug is suitable for use in a wide range of plumbing applications, including in domestic, commercial and industrial settings. It is also suitable for use in waste pipes, vents, and other similar applications.
Overall, the McAlpine WP4T 1 3/4" White PVC Plug is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in a range of applications.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in White PVC
McAlpine 1 3/4" White PVC Plug WP4 is a plumbing component that is used to seal off a pipe or fitting. The plug is made of white PVC, which is a durable and corrosion-resistant material. The 1 3/4" size refers to the diameter of the plug, which is designed to fit into a pipe or fitting with the same diameter. The WP4 designation is the model number of the plug manufactured by McAlpine, a leading plumbing and drainage product manufacturer based in the UK. This type of plug is commonly used in residential and commercial plumbing systems to prevent the flow of water or other liquids.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in White PVC
The McAlpine WP3 is a white PVC plug designed for use in plumbing systems. Specifically, it is designed to fit into the end of a 1 1/2" waste pipe or other plumbing fixture to prevent the flow of water or other fluids.
The WP3 plug is made from high-quality PVC material that is durable, resistant to corrosion and damage from chemicals. PVC is a common material used in plumbing systems because of its strength and resistance to wear and tear.
The WP3 plug is easy to install and remove, making it a convenient solution for plumbing maintenance and repairs. It provides a secure and watertight seal, preventing any leaks or smells from escaping the pipe or fixture.
The WP3 plug is designed for use with McAlpine products, but can also be used with other compatible plumbing systems. It is a reliable and cost-effective solution for sealing off waste pipes and other plumbing fixtures.
Overall, the McAlpine WP3 plug is a simple yet effective solution for preventing leaks and odours in plumbing systems. Its durable PVC construction and easy-to-install design make it a dependable option for plumbing maintenance and repairs.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in white polypropylene
The McAlpine WP2T is a white plastic plug with a rubber seal designed for use in plumbing systems. Like other McAlpine plugs, it is designed to fit into the end of a waste pipe or other plumbing fixture to prevent the flow of water or other fluids.
The WP2T plug is made from high-quality plastic material that is resistant to corrosion and damage from chemicals. The rubber seal provides a watertight and secure fit, preventing any leaks or smells from escaping the pipe or fixture.
The main difference between the WP2T plug and other McAlpine plugs is that the WP2T plug has a tapered design. This allows it to fit more securely into pipes and fixtures that have a slight taper, providing a more effective seal.
The WP2T plug is designed for use with McAlpine products, but can also be used with other compatible plumbing systems. It is easy to install and remove, making it a convenient solution for plumbing maintenance and repairs.
Overall, the McAlpine WP2T plug with rubber seal is a reliable and effective solution for sealing off waste pipes and other plumbing fixtures. Its durable plastic construction, watertight rubber seal, and tapered design make it a dependable option for preventing leaks and odours in plumbing systems.
・ Manufactured in White polypropylene
The McAlpine WP2 is a white plastic plug with a rubber seal designed for use in plumbing systems. Like the WP1 plug, it is designed to fit into the end of a waste pipe or other plumbing fixture to prevent the flow of water or other fluids.
The WP2 plug is made from high-quality plastic material that is resistant to corrosion and damage from chemicals. The rubber seal provides a watertight and secure fit, preventing any leaks or smells from escaping the pipe or fixture.
The main difference between the WP2 plug and the WP1 plug is that the WP2 plug has a larger diameter, making it suitable for use in larger pipes or fixtures. The WP2 plug also has a more secure fit, making it ideal for use in applications where there is a risk of high pressure or force on the plug.
The WP2 plug is designed for use with McAlpine products, but can also be used with other compatible plumbing systems. It is easy to install and remove, making it a convenient solution for plumbing maintenance and repairs.
Overall, the McAlpine WP2 plug with rubber seal is a reliable and effective solution for sealing off waste pipes and other plumbing fixtures. Its durable plastic construction and watertight rubber seal make it a dependable option for preventing leaks and odours in plumbing systems.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in white polypropylene
The McAlpine WP1T is a white plastic plug with a rubber seal, similar to the WP1 plug. However, the WP1T has the added feature of a test point, which allows for easier testing and maintenance of the plumbing system.
The test point on the WP1T plug is a small opening on the top of the plug that can be easily removed or unscrewed. This allows for easy access to the interior of the pipe or fixture for testing or cleaning purposes. The test point also helps to release any airlocks in the system.
Like the WP1 plug, the WP1T is designed for use in plumbing systems to prevent the flow of water or other fluids. It is made from durable plastic material that is resistant to corrosion and damage from chemicals. The rubber seal provides a watertight and secure fit to prevent leaks and smells from escaping the pipe or fixture.
The WP1T plug is easy to install and remove, making it a convenient solution for plumbing maintenance and repairs. It is designed for use with McAlpine products, but can also be used with other compatible plumbing systems.
Overall, the McAlpine WP1T plug with test point and rubber seal is a useful and versatile solution for plumbing systems. Its test point feature allows for easy testing and maintenance, while its durable plastic construction and watertight rubber seal make it a reliable option for preventing leaks and odours.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in white polypropylene
The McAlpine WM3V is a plumbing trap designed for use with standpipe waste systems. It is an anti-syphon (Silentrap) standpipe trap, which means it is designed to prevent the backflow of wastewater from the pipework and prevent airlocks in the system.
The trap has a 75mm water seal to prevent foul odours from entering the room, and a 1.5" multifit outlet for easy connection to standard pipework. Unlike other traps that connect directly to an appliance, the WM3V connects to a standpipe waste system, which is a vertical pipe that extends from the floor or wall.
The anti-syphon feature of the WM3V trap prevents the siphoning of water from the trap, which can lead to airlocks and the release of unpleasant odours. This feature ensures that the trap remains full of water, creating an effective barrier to prevent the backflow of wastewater.
The WM3V is designed as a standpipe trap, meaning that it is designed to be installed on top of a vertical standpipe waste system. The trap is connected to the standpipe by a rubber seal, creating a watertight connection that prevents any leaks or smells from escaping.
Overall, the McAlpine WM3V trap is a reliable and easy-to-install solution for standpipe waste systems. Its anti-syphon feature and 75mm water seal make it an effective barrier against backflow and unpleasant odours. Its 1.5" multifit outlet also makes it easy to connect to standard pipework.
・ For use with WM3 Trap to cap off standpipe
The McAlpine WM12 is a plumbing trap designed to be used with domestic appliances such as dishwashers and washing machines. The trap has a 75mm water seal to prevent foul odours from entering the room, and a 1.5" multifit outlet for easy connection to standard pipework.
The trap also features a 135° swivel inlet connection, which allows the discharge pipe from the appliance to be connected at an angle that is convenient for installation. This swivel connection helps to ensure that the trap can be easily installed in tight spaces, without the need for complex pipework.
The WM12 trap is designed as a tubular swivel trap, meaning that it consists of a curved section of pipe that creates a water seal. This water seal prevents unpleasant smells from entering the room, as well as preventing the backflow of wastewater from the pipework.
Overall, the McAlpine WM12 trap is a reliable and easy-to-install solution for ensuring a clean and efficient waste system for domestic appliances such as dishwashers and washing machines. Its 135° swivel inlet connection and 75mm water seal make it a versatile choice for a range of installation scenarios.
The McAlpine WF21 Wasteflow with 1½" Waste Outlet Fitting, Plug, Chain and 2 Way Connector is a plumbing fitting designed for use with kitchen sinks. The WF21 Wasteflow is a standard waste outlet that connects to the sink, while the plug and chain prevent water from flowing out when needed. The 2-way connector is used to connect a dishwasher or washing machine to the waste system.
The WF21 Wasteflow is a 1.5 inch BSP threaded waste outlet, which means it can be connected to standard pipework using a compression fitting or similar. The outlet is designed to fit into a 90mm diameter hole in the sink, and comes with a rubber sealing washer to ensure a watertight seal.
The plug and chain assembly is designed to prevent water from flowing out of the sink when needed, such as when filling the sink with water for washing dishes. The plug fits into the waste outlet and is connected to the chain, which allows the plug to be easily removed and replaced as needed.
The 2-way connector is used to connect a dishwasher or washing machine to the waste system. It is designed to be inserted into the side of the waste outlet, and has two branches to allow the waste from the appliance to flow into the system.
Overall, the McAlpine WF21 Wasteflow with 1½" Waste Outlet Fitting, Plug, Chain and 2 Way Connector is a comprehensive solution for a clean and efficient kitchen waste system, providing easy-to-use plug and chain assembly and a convenient 2-way connector for connecting appliances.
・ Available without trap, or with FJ10 or FSK10 trap
・ 1½" Multfit Outlet
・ For information on Wasteflow Products click here
・ Supplied with flexible overflow tube and CP overflow grating
・ 1½" BSP male thread on inlet will require a Wasteflow fitting
