Pipe Fittings

JG Underfloor Heating Manual Air Vent uses a thumb turn bleed valve to manually vent air from within the UFH system to eliminate any cold spots within a floor. The valve is easy to install as it simply screws directly into the manifold end connection on the manifold flow bar. Thumb turn bleed valve Manually air vent Thumb turn valve Durable DZR brass with a nickel plate finish Suitable for underfloor heating applications only

Read more less

JG Speedfit foil tape is used to detect plastic pipes inside walls. Suitable for hot, cold and heating applications

Read more less

JG Speedfit lockshield radiator valve is used to switch off a radiator for installation or maintenance and can be used to balance radiators in the system so that they all heat up at the same rate. The JG Speedfit lockshield radiator valve is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Lockshield radiator valve with a tamperproof cap Fast and simple tool-free connection Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for central heating systems

Read more less

JG Aura Hub supports up to 10 Internet enabled thermostats. For projects requiring more thermostats, a JG Hub User Licence will increase capacity by 10. An additional JG Hub User Licence can be purchased to increase the device maximum to 30. 10 hub user Licences

Read more less

JG Speedfit release aid allows a firmer grip on the collet when removing pipes. Designed, manufactured and assembled in the UK. Provides a firmer grip on the collet demounting pipe For use with Speedfit fittings

Read more less

JG Speedfit ball valve (chrome plated) for connecting plastic or copper pipe. Using an easy to operate handle, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Durable brass chrome plated body Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports. Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply. Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop. High performance stainless steel manifold Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors. Easy to fit due to pre-mounted brackets and vibration isolation mount Integral Automatic Air Vent discharges air that could impact circulation Valves on the return manifold are compatible with thermoelectric heads Rail valves on the return rail allow circuit actuators to be easily connected Versatile assembly for left or right-hand supply Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)

Read more less

For I beam joists to be used with composite joists and are fixed from below. Speedfit Pipe is fixed in the grooves of the plates, insulation is placed in the void below the plates to minimise downward heatloss. Technical Specification Brand JG Speedfit Manufacturer ID JGUFHSP165 Type Speedfit Size (mm) 165

Read more less

JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK. Colour coded for easy identification of service type For use with Speedfit fittings Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit pipe in pipe is ideal for short through wall pipe runs where a firmer pipe material is an advantage. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. The JG Speedfit pipe in pipe is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. The pipe comes encased in protective conduit pipe to protect it from potential damage when run through partitions or walls. Designed, manufactured and assembled in the UK. Pre-fitted conduit protection Lightweight flexible pipe but with a more rigid property than Polybutylene Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit conduit pipe coil is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure. Available in black, red and blue. Durable corrugated design. Colour coded for easy identification of service type

Read more less

JG Speedfit conduit pipe coil is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure. Available in black, red and blue. Durable corrugated design. Colour coded for easy identification of service type

Read more less

JG Speedfit conduit pipe coil is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure. Available in black, red and blue. Durable corrugated design Colour coded for easy identification of water service

Read more less

JG Speedfit conduit pipe coil is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure. Available in black, red and blue. Durable corrugated design Colour coded for easy identification of water service

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat polybutylene barrier pipe coil offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the JG Layflat polybutylene barrier pipe coil ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat polybutylene barrier pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat polybutylene barrier pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Layflat polybutylene barrier pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK. Lightweight flexible pipe makes cabling fast and simple Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK. Lightweight flexible pipe but with a more rigid property than Polybutylene Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK. Lightweight flexible pipe but with a more rigid property than Polybutylene Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK. Lightweight flexible pipe but with a more rigid property than Polybutylene Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK. Lightweight flexible pipe but with a more rigid property than Polybutylene Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings. The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK. Lightweight flexible pipe but with a more rigid property than Polybutylene Less fittings, less labour and material costs, less potential leak points Safe and non-toxic material with no need for hot works Resists corrosion and scale build up, reducing pin hole leaks and blockages Pipe elasticity reduces the chance of burst pipes in freezing conditions Considerably reduces the noise of water hammer Suitable for hot and cold water and central heating systems

Read more less