The McAlpine WC-CON8F18-BTW is a flexible WC connector designed for back to wall toilet pans, which can be installed in a vertical position. The connector has an inlet diameter of 97-107mm and features a 90° bend, which helps to ensure a secure and reliable connection between the pan and the soil pipe.
The flexibility of the connector allows for easy installation, even in situations where the toilet pan and the soil pipe are not perfectly aligned. This can save time and money by reducing the need for complicated plumbing work.
The McAlpine WC-CON8F18-BTW is made from high-quality materials and is built to last. It is designed to withstand the demands of daily use and is resistant to damage from chemicals and other corrosive substances.
Overall, the McAlpine WC-CON8F18-BTW is a reliable and convenient solution for connecting a back to wall toilet pan to a soil pipe.
・ Available in 2 lengths
・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Enables easy installation of WC pans in awkward situations
The McAlpine CONFLEX-300 is a flexible connector that is designed to connect a condensing boiler to a rigid (19/23mm) or flexible (25mm) condensate discharge pipe. The purpose of this connector is to provide a flexible joint that can accommodate any movement or vibration of the boiler or the discharge pipe, ensuring a secure and reliable connection.
The CONFLEX-300 is made from high-quality materials that are resistant to corrosion and can withstand high temperatures. The connector is constructed with a flexible EPDM rubber sleeve that is reinforced with a stainless steel braid for added strength and durability. The connector also features a compression fitting that allows for easy installation and removal without the need for special tools or equipment.
In addition to its flexibility and durability, the CONFLEX-300 is also designed to prevent the backflow of condensate into the boiler. The connector features a built-in air break that ensures that any condensate that flows back into the connector is discharged safely and efficiently.
Overall, the McAlpine CONFLEX-300 is a reliable and versatile connector that is ideal for connecting condensing boilers to condensate discharge pipes. Its flexible design, corrosion-resistant materials, and built-in backflow prevention make it a popular choice among HVAC professionals and homeowners alike.
・ Available in 200mm and 300mm lengths
・ Universal connections suitable for 19/23mm rigid pipe and 25mm flexible pipe
・ Easy connection to boiler condensate discharge pipe
・ Allows for disconnection in freezing conditions for discharge to be redirected into a receptacle
・ Conforms to BS 6798:2009 and Building Regulations Approved Document H
The McAlpine 2" X 1 1/2" Bsp Coupling is a plumbing fitting designed for connecting pipes of different sizes. The coupling is made of high-quality PVC material, and it has a 2-inch female threaded end and a 1 1/2-inch male threaded end.
The coupling is designed to be used with pipes that have a British Standard Pipe (BSP) thread, which is a common type of threading used in plumbing applications in the United Kingdom and other parts of the world.
The McAlpine 2" X 1 1/2" Bsp Coupling is typically used to connect two pipes of different sizes together, allowing for the efficient and reliable transfer of fluids or gases. The coupling is easy to install and can be tightened securely using a wrench.
Overall, the McAlpine 2" X 1 1/2" Bsp Coupling is a high-quality plumbing component that is built to last. It is suitable for use in a wide range of plumbing applications and is compatible with a variety of different pipe materials.
・ Available in 9 sizes
・ Waste Outlet Reducer
The McAlpine WS3 1½" Shower Waste is a plumbing fitting designed for use in shower systems. It features an 85mm white plastic flange and a 3½" tail with a backnut model for easy installation.
The WS3 waste is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in shower systems. The white plastic flange provides a neat and tidy finish that is suitable for a wide range of bathroom designs.
The 3½" tail of the waste is designed to fit into standard sized pipes and provides a secure and watertight seal to prevent leaks. The backnut model of the waste makes it easy to install and remove as needed, allowing for simple maintenance and repairs.
The WS3 shower waste is suitable for use in both domestic and commercial shower systems, and is capable of handling the demands of high-flow water systems. It is compatible with a range of shower trays and floor surfaces, making it a versatile and reliable choice for any shower installation.
Overall, the McAlpine WS3 1½" Shower Waste is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in shower systems. It is easy to install and maintain, making it a popular choice for both professional and DIY plumbers.
・ 1½" BSP
・ 85mm White Plastic flange
・ White plastic Backnut
・ 1½" Tail
・ Manufactured in Polypropylene
The McAlpine WC-F23P is a straight flexible WC connector designed for use with 97-107mm inlet and 110mm plain end outlet waste pipes. It is made from high-quality, durable materials to ensure a long-lasting, reliable connection. The flexibility of the connector allows for easy adjustment and maneuverability during installation, making it ideal for use in tight spaces or where access is limited. This product is designed to provide a secure and leak-free connection between the toilet pan and the waste pipe, and it can be used for both horizontal and vertical installations.
・ Available for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Soft synthetic rubber inlet connection
・ Worm drive hose clip provides a secure and reliable connection to the WC pan spigot prior to the final placement against the wall of furniture
The McAlpine SWHF1-WH is a high flow shower waste with a 113mm white plastic flange and a 56mm tail. It features a top access design and a backnut model, making it easy to install and maintain.
The high flow design of the SWHF1-WH shower waste ensures that water flows away from the shower quickly and efficiently, preventing blockages and backups. The 113mm white plastic flange provides a reliable seal against the shower tray, and is designed to be both durable and stylish.
The shower waste features a 56mm tail that can be easily connected to standard UK plumbing, and its backnut model allows for easy installation and maintenance. The top access design means that the waste can be easily accessed from above, making it easy to clean and maintain.
The McAlpine SWHF1-WH shower waste is suitable for use in a wide range of shower enclosures and trays, and its versatile design makes it a popular choice among plumbing professionals. It is compatible with most shower tray designs and can be used in conjunction with other McAlpine plumbing products to create a complete plumbing system.
Overall, the McAlpine SWHF1-WH high flow shower waste is a reliable and effective solution for ensuring that water flows away from the shower efficiently. Its high-quality construction and easy-to-use design make it a popular choice among homeowners and plumbing professionals alike.
・ Available in 1½" and 2" sizes
・ 56mm Tail available in White or Chrome Plated Plastic
・ 113mm White Plastic slotted cover flange
・ White plastic Backnut
・ Top access for easy cleaning
The McAlpine STW8B-95 is a 50mm water seal shower trap with a universal outlet. It is designed to be used in conjunction with standard 1½" UK plumbing and is suitable for use with most shower trays and enclosures.
The water seal on the STW8B-95 trap prevents foul odours from escaping from the drainage system, while the universal outlet ensures that it can be connected to a variety of waste pipes. The trap is constructed from high-quality materials to ensure durability and long-lasting performance, and is easy to install.
The STW8B-95 shower trap features a brass body and chrome-plated cover, which gives it a stylish and modern appearance. The low profile design of the trap makes it ideal for use in shallow shower trays, while the removable trap body makes it easy to clean and maintain.
Overall, the McAlpine STW8B-95 shower trap is a reliable and effective solution for preventing foul odours from escaping from the drainage system. Its universal outlet and stylish design make it a versatile option that can be used in a wide range of shower trays and enclosures, while its high-quality construction ensures that it will provide long-lasting performance.
・ Available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 95° Bend - BSP coupling nut x 1½" Multifit
The McAlpine STW7-RB is a 19mm water seal shower trap with a universal outlet. It is similar to the STW7-M, but features a removable bottom section for easy cleaning and maintenance.
The STW7-RB is made from high-quality materials and is designed to be durable and long-lasting. It features a 19mm water seal to prevent water from flowing back into the shower and helps prevent any unwanted odors from entering the bathroom.
The universal outlet design of the trap allows it to be easily connected to a variety of different waste pipe sizes and configurations, making it a versatile option for any shower installation. The removable bottom section allows for easy access and cleaning, ensuring that the trap remains effective and free from blockages.
Overall, the McAlpine STW7-RB 19mm Water Seal Shower Trap with Universal Outlet is an excellent choice for anyone looking for a reliable and easy-to-maintain shower trap solution. Its removable bottom section makes it particularly well-suited for installations where access is limited or regular cleaning is required.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 19mm Water Seal
・ 1½" BSP Thread
・ 1½" Universal Outlet
The McAlpine ST90CPB-S-V is a shower trap designed for vertical waste pipe connections. It has a water seal of 90mm x 50mm and a 2" universal vertical outlet, which allows for easy connection to vertical pipes.
The trap is designed for efficient drainage, ensuring that water does not accumulate in the shower tray. It also features a removable 110mm flange, making it easy to clean and maintain.
Overall, the McAlpine ST90CPB-S-V is a reliable and convenient option for any shower installation that requires a vertical waste pipe connection.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 2" Universal Vertical Outlet
・ Removable 110mm flange facilitates easy cleaning
The McAlpine ST90CPB-P-HP is a high-performance shower trap designed for use in plumbing installations where a high flow rate is required. The trap has a 90mm water seal and a 50mm outlet, which is compatible with 2" pipework. The trap features a removable 110mm flange, making it easy to access and clean.
One of the key features of the ST90CPB-P-HP is its high-performance design. The trap has been engineered to provide a high flow rate, making it ideal for use in showers and other applications where a large volume of water needs to be drained quickly. This is achieved through a combination of factors, including the size and shape of the trap and the materials used in its construction.
The trap is also designed to be easy to install, with a universal outlet that can be connected to a wide range of pipework. The removable flange makes it easy to access the trap for cleaning and maintenance.
Overall, the McAlpine ST90CPB-P-HP is a high-performance shower trap that is designed to provide excellent performance and durability in a range of plumbing applications. Its high flow rate and easy installation make it an ideal choice for anyone looking for a high-quality shower trap.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 2" Universal
The McAlpine Chrome Plated Brass Flange & Dip Tube (ST90CBTOP+TUBE) is a specific plumbing fitting used in conjunction with a shower trap. The flange and dip tube are designed to be installed in the shower tray or bath to provide a neat and tidy finish to the plumbing installation.
The ST90CBTOP+TUBE features a chrome-plated brass flange, which sits flush with the surface of the shower tray or bath. The flange has a 90mm diameter and is designed to be used with a McAlpine shower trap.
The dip tube, which is also included with the ST90CBTOP+TUBE, is made from high-quality materials and is designed to fit into the shower trap. It is designed to prevent water from flowing back into the trap and causing foul odours.
Overall, the McAlpine Chrome Plated Brass Flange & Dip Tube (ST90CBTOP+TUBE) is a specific plumbing fitting used in conjunction with a shower trap to provide a neat and tidy finish to the plumbing installation. Its high-quality materials and chrome-plated finish make it a durable and stylish option for many plumbing applications.
McAlpine 3"/75mm MAC-EXTC is an adjustable length straight extension WC connector designed to extend the distance between a toilet pan and a soil pipe. The adjustable length feature of the extension piece allows it to be adjusted to fit the required length, which means that it can be used in a wide range of installation situations. The extension piece is easy to install and can be fitted quickly without the need for any special tools or equipment.
The MACFIT technology used in the McAlpine MAC-EXTC connector makes installation quick and easy. The connector simply pushes into the soil pipe and onto the toilet pan without the need for any tools or additional sealing materials. This helps to save time and effort during installation and ensures a secure and watertight connection.
Overall, the McAlpine MAC-EXTC is a reliable and easy-to-install WC connector that can provide a flexible solution to many toilet installation scenarios requiring an adjustable length straight extension.
・ Available for 3"/75mm, 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ Adjustable Length
・ White colour to match sanitaryware
・ Complies with BS 5627:1984
・ Manufactured in EVA, a soft, durable, flexible plastic material
The McAlpine Universal Bend 135 Deg x BSP Loose Coup Nut 1.5" ST90-Out is a plumbing fitting designed to connect two pipes at a 135-degree angle. The fitting features a universal design, making it suitable for use with a range of pipe sizes and types. It comes with a BSP loose coupling nut that allows for easy installation and secure fitting. The fitting is made from durable materials and is resistant to corrosion, ensuring long-lasting performance. The ST90-Out designation indicates that this fitting is suitable for use with a soil pipe system.
・ 1½" Universal Outlet
・ Universal Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine WC-CON5 is a type of rigid WC connector that is designed to connect a toilet pan to a soil pipe with a 97-107mm inlet and a 20mm offset. The connector is adjustable in length to accommodate different installation requirements.
Here are some additional details about the McAlpine WC-CON5:
It is made from high-quality materials that are durable and resistant to corrosion and other forms of damage.
The connector has a unique shape that allows it to fit securely and snugly between the toilet pan and soil pipe, ensuring that there are no leaks or other issues.
The adjustable length feature allows for flexibility in installation, which can be particularly useful in situations where the soil pipe is not in the ideal location.
The 20mm offset is designed to provide extra space between the toilet pan and the soil pipe, which can be useful in situations where there are space constraints or where the soil pipe is not located directly behind the toilet pan.
The McAlpine WC-CON5 is compatible with most standard toilet pans and soil pipes, making it a versatile and reliable choice for a wide range of installation scenarios.
Overall, the McAlpine WC-CON5 is a high-quality, reliable WC connector that is designed to provide a secure, leak-free connection between a toilet pan and a soil pipe. Its adjustable length
・ Available with finned outlet for 4"/110mm PVC-U and cast iron soil pipe diameters (internal), and with plain end outlet to fit 110mm soil or underground pipe fittings
・ 97-107mm Inlet suits all pan spigots
・ Adjustable Length
・ Complies with BS 5627:1984 and DIN 1389-2
・ Manufactured in Polypropylene
The McAlpine CAP100 is a temporary blanking off cap that is designed for use with 110mm diameter soil pipes. It is used to temporarily seal off a soil pipe during construction or maintenance work.
The CAP100 is made from durable and long-lasting materials, ensuring that it can withstand the rigors of use on construction sites. It is also designed to be easy to install, with a simple push-fit mechanism that allows it to be securely attached to the end of a soil pipe without the need for additional tools or fittings.
Once installed, the McAlpine CAP100 provides a reliable and effective seal, preventing any unwanted materials or debris from entering the soil pipe during construction or maintenance work. This helps to ensure that the soil pipe remains clean and free-flowing, reducing the risk of blockages or other issues that can cause problems in the future.
Overall, the McAlpine CAP100 is a high-quality and reliable temporary blanking off cap that is an essential tool for anyone working with soil pipes on construction or maintenance projects.
・ For temporarily sealing 4"/110mm pipe
・ Manufactured in synthetic rubber
The McAlpine 1 1/2" x 1 1/4" Trap Inlet Reducer is a durable plumbing accessory designed to reduce the size of a 1 1/2" trap inlet to a 1 1/4" inlet. This high-quality reducer is made from sturdy materials to ensure long-lasting performance and can be used with a variety of plumbing fixtures such as sinks and basins.
The reducer is easy to install and can be used for both commercial and residential applications. It helps to ensure that water flows smoothly through the plumbing system and prevents any blockages that could cause damage or inconvenience.
With its compact size and versatile design, the McAlpine 1 1/2" x 1 1/4" Trap Inlet Reducer is a must-have for any plumber or DIY enthusiast looking to upgrade their plumbing system.
・ Mounted on Card with Hanging Slot
・ 1½" x 1¼" Trap Inlet Reducer
・ Available in 2 sizes
・ Manufactured in White Polypropylene
The McAlpine White Pop-Up Plug is a stylish and functional accessory for your bathroom sink. This product includes a sleek, white-colored pop-up plug that can be easily opened and closed with a simple press.
Crafted from high-quality materials, the McAlpine White Pop-Up Plug is designed to withstand exposure to moisture and chemicals, ensuring its longevity and reliability in your plumbing system. The plug is both durable and easy to clean, making it a practical and hygienic choice for your bathroom.
Installation of the McAlpine White Pop-Up Plug is simple and straightforward. To use, simply insert the plug into your sink's waste opening and push down to close it. To open, simply push down on the plug again to release the water.
The McAlpine White Pop-Up Plug is an ideal choice for anyone looking to upgrade their current sink waste plug accessory or replace a worn-out one. Its high-quality construction, easy installation, and stylish design make it a popular choice for homeowners, DIY enthusiasts, and professional plumbers alike.
In summary, the McAlpine White Pop-Up Plug is a must-have accessory for any bathroom sink. Its durable construction, easy installation, and stylish design make it a reliable choice for any household. Upgrade your sink waste plug accessory today with the McAlpine White Pop-Up Plug.
・ Mounted on Card with Hanging Slot
・ White Pop-Up Plug
・ Manufactured in White plastic
The McAlpine BSW10P Centre Pin Bath Waste is a plumbing accessory designed for use in bathtubs. Here's a breakdown of its key features:
Centre Pin: The centre pin refers to the mechanism that controls the flow of water through the waste. In this case, it's a "pop-up" style waste, meaning that when you push down on the centre pin, the waste will open and allow water to drain out of the bathtub. When you push down on the pin again, it will pop back up and close the waste.
Bath Waste: A bath waste is a plumbing component that connects the drain in the bathtub to the plumbing system of the building. It's designed to allow water to drain out of the bathtub, while also preventing any debris or other items from clogging the pipes.
70mm Stainless Steel Flange: The flange is the part of the waste that sits on top of the bathtub and secures the waste in place. In this case, the flange is made of stainless steel, which is a durable and corrosion-resistant material.
Black PVC Plug: The plug is the part of the waste that seals the drain when the waste is closed. In this case, the plug is made of black PVC, which is a type of plastic that's known for its strength and durability.
Overall, the McAlpine BSW10P Centre Pin Bath Waste is a high-quality plumbing accessory that's designed to provide reliable performance and long-lasting durability.
・ Available in 1¼" or 1½¿
・ Black PVC plug
・ Available with or without CP chain
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
Introducing the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70, the perfect solution for securing and sealing plumbing fixtures.
Crafted from high-quality brass with a nickel finish, this ferrule is designed to withstand exposure to moisture and chemicals, making it a reliable choice for both residential and commercial plumbing systems.
The McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is designed with a threaded configuration, which allows for a more secure and watertight seal. It's easy to install, simply screw the ferrule onto the threaded fixture until it fits snugly in place.
This ferrule is an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Whether you're looking to secure a plumbing fixture or need to repair a damaged plumbing system, the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is an excellent solution.
In addition to its functional benefits, the nickel finish adds an elegant touch to any plumbing system. The ferrule is also lightweight and compact, making it easy to store and transport.
In summary, the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is an essential component for anyone looking to maintain a secure and watertight plumbing system. With its easy installation, high-quality construction, and compatibility with a range of plumbing fixtures, this ferrule is an excellent choice for a range of applications.
・ Manufactured in Nickel Plated Brass
・ Other sizes available
The McAlpine STW4-65 is a slimline shower trap designed to be installed in a shower waste pipe. It has a 20mm water seal which helps prevent foul odours and gases from entering the bathroom. The trap has a solvent weld outlet, which means it can be securely joined to a waste pipe using a solvent weld adhesive.
The slimline design of the trap means it takes up less space under the shower tray, making it ideal for installations where space is limited. The trap is made from high-quality materials, ensuring it is durable and long-lasting.
It is important to ensure that the trap is installed correctly and in accordance with the manufacturer's instructions to ensure it functions correctly and prevents any potential issues with odours or blockages in the waste pipe.
・ Chrome Plated Plastic Flange
・ Suitable for shower trays with a 50mm waste hole
・ Overall height is only 65mm
・ 20mm Water Seal
・ Supplied with 1½" loose nut x solvent weld adaptor
The McAlpine ST90CPB-S-53 is a slimline shower trap designed for use with 90mm shower wastes. It has a water seal of 50mm and features a 1½" solvent weld outlet. The trap is designed to prevent foul smells from entering your bathroom by trapping water inside the trap, which creates a seal that prevents gases from passing through.
The trap is made from high-quality materials and is built to last. It is easy to install and can be used with a range of different shower trays and waste pipes. The slimline design means that it can be installed in tight spaces and will not take up too much room under the shower tray.
Overall, the McAlpine ST90CPB-S-53 is a reliable and effective shower trap that is well-suited to a range of different bathroom installations. If you are looking for a high-quality shower trap that will provide reliable performance and help to keep your bathroom smelling fresh, this could be a good option to consider.
・ Flanges available in Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ Overall height is only 53mm
・ Fixed with Stainless Steel Clamping Ring and 3 securing screws for tight connection to the shower tray
・ 25mm Water Seal
The McAlpine ST90CP10-V is a water seal shower trap that is designed to be used with a 2" universal vertical outlet. The trap has a removable 110mm flange, which makes it easy to clean and maintain. The trap has a water seal of 50mm and is designed to prevent foul odors from entering the bathroom.
The trap is made from high-quality materials, which make it durable and long-lasting. The trap is easy to install and comes with clear instructions to guide you through the installation process.
Overall, the McAlpine ST90CP10-V is a reliable and efficient shower trap that is perfect for use in any bathroom. It is important to ensure that you choose the correct size and type of trap for your shower to ensure proper function and prevent issues such as clogs and foul odors.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 2" Universal Vertical Outlet
・ Removable 110mm flange facilitates easy cleaning
The McAlpine R23U ¾" Blanking Cap for Overflow Pipe with Universal connection is a high-quality plumbing accessory designed to provide a quick and easy solution for capping off a ¾" overflow pipe. This blanking cap is a necessary component for any plumbing system that utilizes an overflow pipe, as it helps prevent water damage by keeping the pipe sealed when it is not in use.
The cap is made from durable materials that are resistant to corrosion and chemical damage, ensuring long-lasting performance and reliability. Its universal connection makes it compatible with most standard plumbing systems, and its compact size makes it easy to install even in tight spaces.
The ¾" size of the cap is a common size for overflow pipes, and its design ensures a tight and secure seal to prevent leaks and spills. Its simple and straightforward design makes it easy to use even for those without professional plumbing experience.
Overall, the McAlpine R23U ¾" Blanking Cap for Overflow Pipe with Universal connection is an essential tool for any plumber or DIY enthusiast. Its durable construction, compatibility with most standard plumbing systems, and easy-to-use design make it a versatile and reliable plumbing accessory that can be used in a variety of applications to help prevent water damage and ensure the smooth operation of your plumbing system.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
John Guest straight connector push-fit fitting connects two equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
This JG Underfloor Speedfit mixing valve unit is compatible with the brand's Speedfit underfloor hitting systems.
Product features
Compatible with Speedfit underfloor heating systems
Technical specifications
Brand JG Underfloor
Finish Galvanised
Length (M) 0,29
Length (mm) 290
Material Type Ductile Iron
Range speedfit
Range Name Speedfit
Range Type Wet System Underfloor Heating Valves
Weight 815.00000
Hazardous N
Body Material Ductile Iron
Dimensions (L x W x D) 290 x 220 mm
Material Ductile Iron
Supplier Product Code SPUFH1-H
Type Mixing Valve Unit
WEEE Compliant N
Width (mm) 220
JG Underfloor 240v Actuator Valve opens or closes the flow of water to an individual underfloor heating (UFH) circuit on the manifold and is controlled by a thermostat or programmer.
It also allows for independent pipe loop control via the thermostat when wired to a JG Aura wiring centre.
240v circuit actuator valve
Suitable for underfloor heating applications only
JG Underfloor Floor Panel is an underfloor heating (UFH) pipe fixing system provides high heat output and response. Suitable for 15mm pipe, it uses a simple grid system to ensure precise layout to enable minimum pipe bending radius. Ideal for new builds and extensions with a screed floor construction, especially ground floor levels.
Fast and simple to install, it comes with a 11mm layer of insulation along with additional thermal insulation.
Screed pipe fixing system
Simple castellated grid system for precise pipe layout
Enables minimum pipe bending radius
11mm layer of insulation and additional thermal insulation
High heat output and response
Ideal for larger regular shaped rooms
Suitable for underfloor heating applications only
JG Speedfit straight service valve with tap connector for the connection of plastic and copper pipe. Using an integrated handle, the valve allows for isolation of fixtures (taps, bath taps and WCs) and appliances (washing machines and dishwashers) for maintenance or installation.
To connect simply push the JG Speedfit service valve with tap connector fully onto the pipe and screw up to the fixture to the threaded connection. To demount the connection, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Push-fit service valve and hand-tighten tap connector
Integrated ¼ turn handle instantly isolates water
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
John Guest white polypropylene push-fit reducing straight connector fitting connects two unequal metric sized pipes/tubes. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with EPDM seals, the fitting offers greater chemical resistance than push-fit acetal and is suitable for potable water (10 bar at 20°C) and intermittent hot water applications (4 bar at 60°C), including water treatment applications. All John Guest fittings are manufactured and assembled in the UK.
Pack of 10
Keep your sink or bath waste system functioning flawlessly with the McAlpine Sink Bath Clicker Plug Waste Washer ONLY Seal for Click Clack Plug. Designed as a high-quality replacement washer, this seal is ideal for restoring a secure, watertight fit to your McAlpine clicker plug waste systems. Perfect for kitchen sinks, bathroom basins, and bathtubs, this washer ensures reliable sealing performance, helping prevent leaks and maintain efficient drainage. Manufactured from durable, long-lasting material, it�s easy to install and compatible with a range of McAlpine click clack waste fittings.
McAlpine ABS32/35G-BB is a Brushed Brass compression straight connector designed to connect ABS (Acrylonitrile Butadiene Styrene) waste pipes and fittings to brass compression fittings. The connector should be used in conjunction with ABS solvent weld pipes and fittings that conform to the BS EN 1329-1:2000 standard.
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20�C. At elevated temperatures (50�C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV).
Flexible and robust LLDPE (Linear low density polyethylene) pipe
Suitable for air and pneumatics, cold, and intermittent hot water applications
Broad chemical compatibility
Colour coded for easy identification of service type
FDA and NSF certified.
Length - 10m
Tackle installation challenges with ease using the McAlpine Offset 6cm WC Connector. Constructed from strong ABS plastic, this connector provides a 6cm offset for aligning WC pans to soil pipes when direct connection isn�t possible.
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance
Integral 1/4 turn isolation valve
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
Pack of 7
Main Product Description:
The FloPlast 50mm Round Downpipe Bracket is a versatile clipping solution designed to secure 50mm downpipe lengths and fittings to a wall, supporting joints effectively. This black bracket is part of the MiniFlo system, offering a smaller profile that caters to various applications while maintaining practicality and ease of installation.
Features:
- Designed specifically for securing 50mm round downpipe and joints to walls.
- Part of the MiniFlo system, which provides a smaller profile compared to traditional round line systems.
- Suitable for use with different types of gutters, including those made from aluminum, cast iron, and steel.
Benefits:
- Enhances the stability and durability of downpipe installations by securing them to walls.
- Supports joints efficiently, ensuring proper alignment and preventing leaks.
- Offers flexibility in terms of compatibility with various gutter materials.