The Crescent X6™ Metric Open End Ratcheting Spanners have a smooth profile that allows for more torque to be comfortably applied to the fastener. With a ratcheting open end that turns nuts and bolts without removing spanner from fastener. They fit 6 fastener types: Hex, Square, 12 Pt., E-Torx®, Rounded Hex, and Spline. Includes one of each size: 8, 10, 12, 13, 14, 15 & 17mm.
The Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life.Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in). Specification: Cutting Depth: 41mm.1 x Starrett Fast Cut Bi-Metal Holesaw 14mm
This Evolution Short Broaching Cutter Kit is supplied in a handy plastic sotrage case. Contains: 6 x Short (25mm) Broaching Cutters: 12, 14, 16, 18, 20, 22mm1 x Pilot Pin
Duck Tape® Original Masking Tape is an all-purpose tape for general interior applications which helps to stop paint bleed. Product Benefits:Clean removal for up to 30 hours.Suitable for use with most paints including emulsion, gloss and spray paint, as well as most varnishes.1 x Shurtape Duck Tape® All-Purpose Masking Tape 25mm x 50m
These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners. The sockets are available in a range of metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS14 socket has the following specifications:Socket size: 14.0mm.Length: 36mm.Weight: 57g.
Moldex Air Seal FFP3 R D Valved Reusable Mask with wipeable soft foam full-face seal. The AirWave pleated filter offers low breathing resistance and comfortable fatigue-free work. Breathing resistance remains low even after hours of use. Masks are individually wrapped. Prolong mask life with the FFPak storage case (MOL3994). FFP3 protection against harmful and toxic dust, fumes and water/oil-based mists/aerosols. 20 x WEL (Workplace Exposure Limit).
DEWALT Nitrogen Dealer Boots have a full grain, water-resistant, leather upper. Fitted with a 200-joule steel toecap and a steel midsole for total protection, whilst the PU comfort insole helps to provide all-day comfort. The TPU dual density outsole is resistant to petrol, oil and chemicals for long-lasting durability. It is also anti-static and features anti-scuff toe protection. EN Test: CE EN ISO 20345-2011Safety Rating: S3Slip Rating: SRA1 x Pair of DEWALT Nitrogen Dealer Boots Brown UK 8 EUR 42
The DEWALT Jonesborough 1/4in Zip Mid-Layer Fleece is made from stretch polyester with grid fleece backing. With a tonal cover stitch construction. It also features a funnel neck collar and Pro Stretch logo.1 x DEWALT Jonesborough 1/4in Zip Mid-Layer Fleece - XL
DEWALT Harrison Pro Stretch Trousers with holster pockets. These slimmer-fit trousers have 4 stretch inserts in key areas for flexibility and comfort. Cordura reinforced knee pads and lower hems provide increased durability.These DEWALT Harrison Pro Stretch Trousers have the following specification: Colour: Black/GreyWaist: 42in Leg: 33in
Red Devil Onetime Filler is a specially formulated, premium, lightweight filler which comes ready mixed. It spreads easily, is paintable within minutes and won't shrink or crack. No sanding is required. The filler is suitable for interior and exterior use and cleans up easily with water.Size: 4 Litre.
The Faithfull Engineers Square has been carefully crafted from high quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Size: 50mm (2in) External size: 70 x 50mmInternal size: 50 x 31mmStock thickness: 8.5mmBlade thickness: 1.7mm
The Halls MC High Speed Steel Step Drill provides an easy way to cut the hole size you want. Each tool cuts parallel hole sizes. For use on sheet metal to stated maximum thickness.Size range.20,21,22,23,24,25,26,27,28,29,30mm.Maximum Material Thickness. 4mm.Shank to fit size. 13mm. When drilling metals use a coolant.
Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery. Designed for heavy-duty use and made from uniformly heat treated tool steel with a round head and a knurled body for a firm grip. Set of 8 includes: 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm. Pin length: 90mm (3.1/2in).Overall length: 200mm (8in).Size: Set 8 1.5, 2.5, 3, 4, 5, 6, 8 and 10 mm
This Evolution Multi-Material Blade has been designed specifically for Evolution 185mm Circular Saws and Chop Saws only. Made from premium materials in Japan. Ideal for the construction professional and for daily use on a construction site. Designed to cut mild steel*, aluminium, plastics and wood, even wood containing embedded nails, with a single blade. Perfect for cutting hard and softwood, decking, laminate flooring, mild steel angle, Unistrut® and conduit, plywood, MDF, aluminium checker plate, plastic pipes and sheet, plus many other materials. *Please refer to the blade marking for recommended cutting capacity on mild steel. Compatible with the following Evolution machines: R185CCSL, R185CCS, R185CCSX, R185CCSX+ and RAGE4. Specification: Diameter: 185mmBore: 20mmTeeth: 20Kerf: 1.7mmMax. Speed: 3,900/rpm
The DEWALT DCW200 XR Brushless 1/4 Sheet Palm Sander utilises cordless technology for more user freedom. Its brushless motor offers superb run time and durability. A dust-sealed switch and dust-sealed bearings provide prolonged product life. A textured anti-slip top and body grip provide ultimate comfort and control during use. Fitted with a hook & loop platen that provides faster paper changes, better dust extraction and increase sanding efficiency. Paper clamps are also provided for conventional abrasives. The Airlock dust port allows for a secure connection between the tool and dust extractor, keeping the working area clean and free from debris. It is also Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Bare Unit - No Battery or Charger supplied. Specification: Oscillating Speed: 8,000-13,500/min.Paper Size: 140 x 115mm.Pad Size: 108 x 115mm.
A professional, 3/8in drive, hexagonal, metric deep socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.Size: 7mm.Overall length 45.5mm
This Teng Tools professional hexagonal 1/2in square drive socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and to reduce the risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.The TENM1205156 1/2inch square drive socket has the following specifications:Size: 15mm.Length: 38mm.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inThe Trend CO24AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard.All cutters have a bottom cut feature.Diameter: 15 mm.Cutting depth: 25 mm.Shank diameter: 1/4 in.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 10mmC - Cutting Length - 19.1mmT.C.T.
The Hozelock 4716B Pulsar Plus Comfort Knapsack Sprayer has the following specification: Size: 17 litreMax. Fill Level: 16 litre* *This is to allow sufficient air gap for pressurisation.
The Bahco Wood & Metal Bi-Metal Reciprocating Blade has been designed for demanding cutting in wood, even with embedded nails, but it can also be used for thick metal materials. Made from virtually unbreakable Sandflex® bi-metal with precision ground teeth. Thicker blade design with a sloped, narrow nose that makes it easy to use in narrow places but still rigid. It also has a higher resistance to fracturing and bending, allowing straighter cuts.
These Forgefix Double Cliplock Pipe Clips are made from heat-resistant polypropylene, designed to withstand the temperature changes in central heating systems, and are effective with temperatures of up to 100°C (most pipes in domestic central heating systems operate at around 70°C). APPLICATION:Used when fitting most types of pipe work. Polypropylene, also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. An addition polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases and acids.Pipe Clip Double Cliplock 15mm Box 50
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 3.2 mm (1/8in).Length: 125 mm (5in).
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 50 SKU BT1350GA Finish GALV Description MINIBRADS 50 GALVA 5M Qty per box 5000
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Type - Stick nail RingGauge/Diameter (mm) 2.8 Length 50 Collation Angle 28 DegreesSKU S280R50G8 Profile RING Finish G8 Description STICK NAIL 2.80-50 RING GAL8 2M Qty per box 2000 Note: This nail will also fit the N80SB, FW28WW-E, N100S
The Norbar ProTronic Plus 9 Screwdriver features a 360° progressive LED ring for precise visual feedback. There is also a large LCD screen with a bright backlight, the numbers become larger and bolder during active torque for optimal viewing. Four alert modes (LCD, progressive LED, audible and tactile) provide excellent feedback in all working conditions. It has five easily selectable torque units (Nm, lbf.ft, lbf.in, dNm, kg.cm and kg.m (200Nm and above)). The ability to programme up to 10 pre-sets saves time in setting up frequently occurring applications. A wide range of advanced features (cycle counter, customisable sleep timer, language selection, auto torque calculation for torque adaptors, calibration alerts, battery level indication, and numerous alert mode customisations) allow the user to tailor the tool to their work preferences. Torque THEN Angle mode gives the user the ability to conveniently apply an angle to a fastener directly after achieving a torque target without the need to remove the torque wrench from the application. Power interruption technology helps to prevent loss of work and continuity if the wrench is impacted. A patent-pending, built-in calibration factor feature allows different head lengths to be easily accommodated. Fitted with a comfortable handle that provides a secure grip. Includes a T-handle for comfort when higher torque levels are required. The battery cap has been designed to prevent accidental loss. Supplied with a storage case and a traceable 'Calibration Certificate' allowing end-users to adhere to more stringent quality control processes. Specification: Drive: 1/4in Female HexRange: 0.45-9NmAccuracy: 5% to 19% ±4%, 20% to 100% ±2%Length: 190mmWeight: 0.21kg
ROCOL ULTRAGLIDE X5 is a total protection slideway lubricant which is resistant to water wash off and protects slides from corrosion. Good lubricant and load carrying properties - reduces wear and prevents stick slip. Rapid demulsification - separates rapidly from cutting fluid and is easily removed by oil skimmers/separators. Size: 5 Litre.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists. Size: 20mm
Stabila OLS 26 Optical level with a 26-fold magnification in optical system, no batteries required to use with the focusing and adjusting screw easily accessible. It has a robust IP54 protection rated casing with easy-grip, shock-absorbing soft shell and solid protection of optical unit also in front area. Magnification: 26-foldMinimum focussing distance: approx. 1mObjective lens aperture: 38mmProtection class: IP 54Standard deviation: < 2mm/kmView in objective: uprightDiameter of field of vision at 100 m: 2.1mMultipication constant: 100Addition constant: 0Compensator accuracy: 0,5Accuracy of height in a single measurement: 1mm/10mCircular vial: 8'/2 mmHorizontal circle : Partition degreeIncrements: 1° Horizontal circle: 360° Supplied with : Optical level OLS 26, Geo-folding rule 2m, plumb line, rain protection, adjusting tools in robust carry case.
