These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards.Tooling : T.C.T.1/4in Shank.R = 3 mmD = 6 mmC = 15 mm
Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.The Footprint 1236 Brick Bolster has additional ribs spreading down the sides and the centre of the blade for added strength and a longer life. Width: 114mm (4.1/2in).
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards.Tooling : T.C.T.1/4in Shank.R = 10 mmD = 20 mmC = 18 mm
140 Series hasp and staple suitable for the Diskus padlock. Combines a high level of security with an extremely high level of anti-corrosion. Specially designed staple protects shackle opening of Diskus locks. Only Carded versions include screws & fixings. Specification 140/120 for flush closing doors: Length: 120mm.140/190 for doors not closing flush: Length: 190mm. Width: 56mm.Shackle Bore: 12.5mm.1 x ABUS 140/120 Diskus Hasp & Staple 120mm Supplied WITHOUT fixings.
The ABUS 141 Series Diskus® Integral Van Lock has a universal hasp and can be used to secure vans, trucks, garages, sheds or any other outward opening double doors. The solid metal case protects the padlock against attacks and has an corrosion resistant powder coated finish. There is also a cylinder cap to prevent dirt and moisture ingress. Easy to operate with one hand due to handy frontal cylinder access. Supplied with a 23/70mm Diskus® Padlock. It is fitted with a precision pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull and manipulation attacks, and a through hardened steel alloy shackle to resist saw attacks. Diskus® 'Deep Weld Technology' offers maximum case strength. Key operated, lock retains key until locked. Ideal for securing valuables/goods of great value or at a very high risk of theft. All fixings are included to ensure a quick and easy installation.
The ABUS 145 Series Aluminium Combination Padlocks feature resettable combinations. The lock body is made from solid aluminium with an anodized coating that is corrosion resistant. Fitted with a spring loaded steel shackle for better setting of the opening code. As the padlocks are secured by means of a 3-digit or 4-digit number combination that can be set individually, they are ideal for use in the leisure industry as there is no need to carry a key. They are also ideal for securing items of luggage or tool boxes. 20-30mm: 3 digit combination, to secure valuables/goods of lesser value or at a low risk of theft. 40mm: 4 digit combination, to secure valuables/goods of medium value or at an average risk of theft.Size : 20 mm.Colour : Yellow.
The ABUS 145 Series Aluminium Combination Padlocks feature resettable combinations. The lock body is made from solid aluminium with an anodized coating that is corrosion resistant. Fitted with a spring loaded steel shackle for better setting of the opening code. As the padlocks are secured by means of a 3-digit or 4-digit number combination that can be set individually, they are ideal for use in the leisure industry as there is no need to carry a key. They are also ideal for securing items of luggage or tool boxes. 20-30mm: 3 digit combination, to secure valuables/goods of lesser value or at a low risk of theft. 40mm: 4 digit combination, to secure valuables/goods of medium value or at an average risk of theft.Size : 30 mm.Colour : Blue.
The ABUS 145 Series Aluminium Combination Padlocks feature resettable combinations. The lock body is made from solid aluminium with an anodized coating that is corrosion resistant. Fitted with a spring loaded steel shackle for better setting of the opening code. As the padlocks are secured by means of a 3-digit or 4-digit number combination that can be set individually, they are ideal for use in the leisure industry as there is no need to carry a key. They are also ideal for securing items of luggage or tool boxes. 20-30mm: 3 digit combination, to secure valuables/goods of lesser value or at a low risk of theft. 40mm: 4 digit combination, to secure valuables/goods of medium value or at an average risk of theft.Size : 40 mm.Colour : Orange.
The ABUS 145 Series Aluminium Combination Padlocks feature resettable combinations. The lock body is made from solid aluminium with an anodized coating that is corrosion resistant. Fitted with a spring loaded steel shackle for better setting of the opening code. As the padlocks are secured by means of a 3-digit or 4-digit number combination that can be set individually, they are ideal for use in the leisure industry as there is no need to carry a key. They are also ideal for securing items of luggage or tool boxes. 20-30mm: 3 digit combination, to secure valuables/goods of lesser value or at a low risk of theft. 40mm: 4 digit combination, to secure valuables/goods of medium value or at an average risk of theft.Size : 40 mm.Colour : Titanium.
Metric 333mm lengths of high carbon bright steel, precision ground to very close tolerances; Above 25mm + - 0.025mm.Below 25mm + - 0.0127mm. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 14mm
The ABUS 158 Series Combination Padlock with a solid die-cast zinc body and a hardened steel shackle. 3-digit (40mm), 4-digit (50mm), or 5-digit (65mm) resettable combination where you can set your own PIN. Ideal for medium security requirements where convenience of use is a high priority (e.g. schools, companies).The ABUS 158/65 Heavy-Duty Combination Padlock has a 5 dial resettable code with 99,999 differs. It has a double bolted hardened steel shackle, and the body is made from Zinc Die Cast. The padlock is ideal for the following applications:Factory and farm gates.Warehouse doors.Trailers.Containers. Specifications: Overall width: 63mm.Overall height: 116mm.Overall depth: 26mm. Shackle width: 31mm.Shackle height: 40mm.Shackle diameter: 10mm. Global Protection System security level: 8.
The ABUS Diskus® 20 Series Padlocks are the Original Diskus® padlocks. The body, inside and out is made from stainless steel. The shackle is also made from a high quality, hardened stainless steel. Fitted with the ABUS-Plus disk cylinder offers the highest protection against manipulation and offers an extremely high number of key differs. The sophisticated Diskus® welded seam provides the highest break resistance and maximum case strength. The Original Diskus® design provides 360° protection from sawing. The fitted dust cap helps prevent cylinder damage. Key operated, lock retains key until locked. Each lock is supplied with key code card. Ideal for securing valuables/goods of great value or at a very high risk of theft, warehouses, factory gates, containers and lorries. Made in Germany.This ABUS 20/80 Diskus® Plus Padlock is supplied with 2 keys and has the following specification: ABUS Security Level: 9. Shackle Width: 25mm.Shackle Height: 18mm.Shackle Diameter: 11mm. Overall Width: 80mm.Overall Height: 81mm.Overall Depth: 35mm.
These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters. The depth of cut on cutters of 2.0mm diameter and below should be a maximum of 1.0mm per pass. Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods Single flute cutters must not be used in eccentric chucks.Shank: 1/4in.Dimensions:Shank: 1/4inCutting Diameter (D): 1.5mmCutting Length (C): 6.0mm
This Faithfull 2 Way Coupling converts a single tap with a 3/4in BSP thread into two quick release outlets with a shut-off valve on each. This handy adaptor allows the use of two watering accessories simultaneously if required. Manufactured from high quality solid brass and suitable for use with all 12.5mm (1/2in) quick release UK water fittings.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 2. Adjustment: 40 - 55mm.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.The Faithfull FAIHC1MSSB Stainless Steel Hose Clip comes in the following:Size: 1M.Adjustment: 32 - 45mm.
The Squire CombiBolt3 is a unique, recodeable locking bolt with 3 die cast zinc wheels for 1,000 possible combinations. The bolt has a die cast lock body and has high pick resistance. It is simple to use and install and allows one-handed operation. The CombiBolt3 is lockable in the open and closed position for extra security. It is rustproof and suitable for harsh environments. The bolt can be used indoors and outdoors, and is ideal for the following:ShedsCupboardsStorage areasCabinetsLockersVehiclesBeach hutsBoatsInternal DoorsGatesUp and over garage doors. Specifications:Body Width: 37mm.Body Length: 90mm.Bolt: 10mm steel.Finish/Colour: Satin Chrome.
3-IN-ONE Silicone Spray provides a long lasting and quick drying silicone coating which is formulated for use on metal, rubber, wood and vinyl. It protects electrical parts and is perfect for wet environments and marine use. Size: 400ml.
3-IN-ONE Penetrant Spray has a fast acting formula, frees rusted or seized fittings. A must for the toolbox kit for anyone working with metal fittings and components, pipe work or engines. Its formula penetrates deeply and helps to free off stuck or seized nuts, bolts and fixings. Size: 400ml.
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 3Adjustment . 55 - 70mmAdjustment. 2.1/8 - 2.3/4in
Monument Trac Pipe is a stainless steel, bendable corrugated gas pipe with a yellow polyethylene cover.This cutter has been designed to cut the omegaflex Trac Pipe from DN15/15 mm to DN32/32 mm.
The Hozelock Aquasolo Watering Cones are made from patented ceramic and offer an innovative way of caring for precious plants both in the home and garden when you are away. This simple self-watering system, made up of a ceramic cone and a plastic screw adaptor, is easily assembled in a few minutes. A reusable reservoir, Aquasolo can also be used to provide hungry plants with liquid feed and is great for greenhouse and house plants alike. The watering cones are compatible with most bottle types from 0.5l to 2l capacity and cater for plant pots up to 25cm in diameter, keeping plants watered for up to 28 days. Just follow these few simple steps for the perfect watering solution: (1) Select the Aquasolo cone according to the size of your pot and choose the bottle size for the required duration.(2) Fill the bottle with tap water, adding liquid feed if required.(3) Screw the bottle onto the cone, with or without the adaptor, turn upside down and make a hole in the bottom.(4) Insert the cone into the plant pot to allow a slow release of water into the compost. To ensure optimum performance and long life of your Aquasolo, remove the cone every few months and soak in a vinegar solution, brush and rinse in clean water. The Hozelock Aquasolo watering cone extends Hozelock’s heritage of quality, innovative products that are designed for gardeners by gardeners. Comes with a 1 year warranty.1 x Pack of 4 Hozelock 2717 Green AquaSolo Watering Cone for Medium 16in Pots
Monument pipe cutter wheels are made from high quality, heat treated steels.Monument 273A Spare Wheel for Tube Cutters size 0 , 1 , 2A, TC3. General purpose for copper, brass and aluminium tube.
Rapid No. 28 precision cut, high performance steel flat wire cable staples with rounded crown are designed for securing low voltage cables up to a maximum of 4.5mm in diameter. They are made from high performance strong galvanised wire with diverging points (DP), which makes leg points go in opposite directions for extra strong bonding. For use with the Rapid R28 Cable Tacker.Type: 28 (white) divergent pointsSize: 10mm leg lengthQuantity: 5 x 1000
Monument Gas Test Gauge is made from tough plastic. Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level. Plastic U Tube.Monument 259I Gas Test Gauge has the following specification: Size: 900mm (36in).Capacity: 90 Millibar.
Monument Plastic Pipe Cutter effective on PVC, polybutylene, MDP, polyethylene, HEP20®, plastic overflow pipe, plastic electrical conduit, supertube, mini trunking, rubber hose, pneumatic pipe and electrical sleeving. Simply place the cutter over the pipe to be cut and gently twist while you depress the handles to get a good clean cut.Monument Plastic Pipe Cutter. Maximum Pipe Size: 42mm ratchet action.
The Sievert 2535 Powerjet Kit is a powerful and efficient torch system with an ergonomic handle. It is both long lasting and reliable, as well as comfortable to grip. The automatic piezo ignition along with trigger on/off function helps to prevent LPG wastage. The anti-flare feature enables the torch to operate in all positions. The torch has a full range of interchangeable nozzles for added versatility. Applications include soldering/brazing, heating, precision work, shrinking and paint stripping, among many others. Supplied with 1 x Ultragas 220583 that has a gas mixture of propane, butane, propene and acetone to give a flame temperature of 2,100°C. It also has a foam insert to enable the cartridge to be used upside down for longer periods. The self sealing valve is constructed in two layers for additional safety. Complies with EN417 Regulations. Specification Burner Included: 870601.Burner Diameter: 14mm.Gas Consumption: 170g/h at 2 bar.Effect: 2.2kW.Connection: EU Fits EN417 7/16in.
The Hozelock 2416 Freestanding Compact Hose Reel has enclosed casing to protect against wear and tear, an easy rewind action and includes a viewing window that allows for full control and stress free rewinding. A tall foam covered towing handle, carry handle and wheels ensures the reel is fully portable, quality built to ensure a sturdy and robust hose reel. It is designed to be quickly and easily assembled. Made from the highest quality plastics, the 30m freestanding Compact Hose Reel will stand the hard wearing challenge of gardening tasks, time after time. Designed and made in Great Britain, the Hozelock Freestanding Compact Hose Reel extends Hozelock’s heritage of quality, innovative products that are designed for gardeners by gardeners. It comes with a 2 year warranty and like most Hozelock products, a full range of spares are available to extend the life way beyond this. Comes with: 30 Metres of 12.5mm Hose, 1 x Nozzle, 2 x Hose Connectors, 1 x Aquastop, 1 x 3/4in Tap Connector and 1 x 3/4in / 1/2in Tap Connector.
The Monument OMAT® Soldering Mat is a patented cut out mat for soldering copper pipes from 15-22mm in diameter. It reduces the risk of fire, and its unique shape with overlap gives a tight and secure fit. Unlike conventional soldering mats the OMAT® wraps around the pipe offering complete protection to the surrounding surfaces. The OMAT® is constructed from a woven glass fabric and does not present any of the hazards associated with asbestos materials. Additionally, it is stitched all around and will resist temperatures up to 600°C.The Monument 2361F OMAT® Soldering Mat has the following specifications: Size: 250mm² (10in²).Pipe Capacity: 15-22mm.
The Hozelock 2362 Single Hose Hanger stores up to 30m of Ø19mm hose and provides easy, hassle free access to your hose when you need it. A smart storage solution that stores your hose, connectors and hose end conveniently together around the tap. Comes with a 5 year warranty (3+2 MUST register online). NOTE: No hose supplied
The Hozelock 2364 Hose Hanger Starter Set is a smart storage solution that stores your hose, connectors and hose end conveniently together around the tap. Provides easy, hassle free access to your hose when you need it. Robust and built to last. Includes 20m of hose, a standard hose connector, an Aquastop connector, tap connector, and screw and wall plug to fit to the wall.
Monument Soldering & Brazing Pad resist temperatures up to 600°C and do not present any of the hazards associated with asbestos material. 2350 Made from woven glass fabric (professional quality).2351 Made from HDW graphite material (professional quality).Monument 2351A Soldering & Brazing Pad resists temperatures up to 600º Celsius, and does not present any of the hazards associated with asbestos material. Made from HDW graphite material Size: 250mm² (10in²).
Monument Soldering & Brazing Pad resist temperatures up to 600°C and do not present any of the hazards associated with asbestos material. 2350 Made from woven glass fabric (professional quality).2351 Made from HDW graphite material (professional quality).Monument 2350X Soldering & Brazing Pad resists temperatures up to 600º celsius, and does not present any of the hazards associated with asbestos material. Made from woven glass fabric (Professional quality). Size: 300mm² (12in²).
The Union 2295 2 Lever mortice sashlocks are ideal for timber doors hinged on the left or right and they keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side with the latch bolt (which is reversible) withdrawn by lever handle from either side.These locks have a two-way action, suitable for lightweight knobs or sprung handles. These locks have a 11mm aluminium deadbolt, a brass reversible latch bolt and the striking plate is finished to match the forend. Supplied with 2 steel nickel plated keysKeying 20 standard differs (numbers from M21H to M40H) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass Finish (Striking Plate Security box type, finished to match forend)Case Size: 63mm x 102mm (2.5in)Backset: 44.5mm This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Pack: Boxed
