The Forgefast Wafer Head Torx® Compatible Construction Screws are suitable for fixing into softwood or hardwood. They have a deep Torx® compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. They have a hardened case and core to give exceptional strength. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35°, reducing likelihood of the screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction.Forgefast Wafer Head Torx® Compatible Construction T40 Screws Size: 8 x 320mm.Pack Size: Tub of 20.Finish: Tan elementech 2000.
These Forgefix Screw Cup Washers have a solid brass finish to avoid corrosion. They are quick and easy to install, with no need to countersink screws. APPLICATIONTo enable flush finish in numerous joinery installations.Can be used with most screw types.Screw Cup Washers Solid Brass Polished No.6 Bag 200
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 30mm.Box quantity: 200.
The DEWALT DCM565 XR Brushless Chainsaw is fitted with a brushless motor for improved power and run-time. It has a lightweight, compact design that is ideal for one-handed cuts. Fitted with a variable speed trigger for single handed activation. The secondary aux-handle provides increased balance and control. Fitted with an automatic oiling system for reduced maintenance and a chain brake that stops in less than 1 second for added safety. Specification: Chain Speed: 7,68m/sBar Length: 30cmWeight: 3.3kgThe DEWALT DCM565P1 XR Brushless Chainsaw is supplied with: 1 x 18V 5.0Ah Li-ion Battery, 1 x Charger and 1 x DT20665 Chainsaw Chain and Bar 30cm.
Liberon Liquid Wax Polish Black Bison nourishes and protects all types of wood. It feeds, polishes and helps to prevent wood drying out, and has traditionally been used on antiques. Well-known for its quality and pleasant, distinctive aroma, it provides a highly lustrous and hardwearing finish, as well as helping to cover marks and scratches. It will enhance the natural beauty of new wood. Made from a blend of waxes, including high quality carnauba wax, it provides good resistance to finger marks. Suitable for large surfaces such as panelling, doors, staircases and other large interior woodwork. Specifications: Dry Time: 1 hour min.Coverage: 10-12m².Location: Interior.Application: Brush, Cloth or Spray.Tool Cleaning: White Spirit. 1 x Liberon Liquid Wax Polish Black Bison Dark Oak 500ml.
Liberon Palette Wood Dye is a water-based, acrylic dye for colouring interior bare wood, whilst leaving the natural beauty of the grain visible. For use prior to oil, wax, varnish and French polish finishes, suitable for both soft and hardwoods. Ideal for use on floors, it is available in a range of wood shades, which can be mixed together to create unique colours. Specifications: Coverage: 8-16m² per litre.Location: Interior.Dry Time: 2 hours min.Application: Brush or Foam Applicator.Tool Cleaning: Water.1 x Liberon Palette Wood Dye Georgian Mahogany 500ml.
Replacement Triangular Sanding Sheets for use with the Vitrex Long Reach Sander LRS700. Must be used in conjunction with the Vitrex LRSDH001 Delta Sander Head (Stock Code: VITLRSDH01). Easy to replace, Hook & Loop attachment.1 x Pack of 10 Vitrex Triangular Sanding Sheets, 80 Grit
The ALM Manufacturing Metal Blades to suit various Flymo models.The ALM Manufacturing FL350 35cm (14in) Metal Blade to suit: Flymo Hover Compact 350. Compares to: FLY039, 5119463-90/8.
Fiskars Hardware Scissors have high-quality, stainless steel blades and a handy wire-cutting notch. Ideal for pruning plants and cutting wire, cork and wallpaper. The ergonomically shaped handles offer a pleasant grip and firm hold. Specifications: Overall Length: 250mm (10in).Blade Length: 150mm (6in).Weight: 126g.
Faithfull Flock Foam Mini Roller Refill provides professional results with a smooth, even finish. Suitable for oil/water-based gloss paints on smooth surfaces. Specification: Size: 100mm (4in)
Everbuild Resiblock Superior Original is a tough, solvent based, long-lasting coating that ensures there is no loss of jointing sand from pressure washing, weathering or trafficking. It also prevents weed and grass growth as well as food and drink stains. Resiblock Superior Original can be used on either new or old paving to enhance the look and is ideal for use on concrete block paving.Specifications: Finish: Natural.SIze: 5 litres.
Everbuild Liquid Mortar Tone is formulated to provide a permanent colour to all types of mortars, rendering, concrete and pointing. Light fast pigments, that will not fade. Improves workability/trowelability, contains a plasticiser. Reduces bleeding/segregation and inhibits efflorescence. The liquid disperses evenly throughout the mix to give uniform shade for each mix batch. Shading can be adjusted to provide a wide variety of colour depths. Chloride free, chloride ion content <0.1%.
Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges TCT. Diameter = 12.7 mmCitting Length = 25.4 mmShank size: 1/4in.
Duck Tape® Colours is a range of brightly coloured and patterned tapes, which are excellent for crafting and imaginative projects. The tapes have the same quality as Original Duck Tape®, providing high-performance strength and adhesion. The tapes are waterproof too, although not suitable for total immersion in water. The tapes can be cut with scissors or torn by hand. Available in many colours and designs.This Duck Tape® Colours & Patterns comes in the following: Colour/Pattern: ChromeWidth: 48mmLength: 9.1m
The Flex Power Tools JSB 18.0-EC C Jigsaw has a brushless motor that delivers high efficiency and performance. With automatic start-up, overload protection and a continuously variable cutting speed setting via potentiometer wheel. Its electronic switch can be operated from both sides. Fitted with a double roller jigsaw blade guide for precise cuts with accurate angles. There is also a removable chip screen for tear-free cuts and an integrated blow function. The stable base plate has a removable plastic guide block that protects delicate surfaces, helping to prevent damage. It can be connected to a vacuum cleaner if desired. An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. The quick-clamping system and eject function allow for tool-free saw blade change. An integrated LED lamp provides optimum illumination of the work area. Supplied as a Bare Unit - No Battery or Charger. Specification: Strokes at No Load: 0-3,500/min.Stroke Length: 26mmPivoting Range: 0-45 degreePendulum Stroke Levels: 4Capacity: Steel Sheet 8mm, Wood 120mmVacuum Attachment: Ø27mmWeight: 2.1kg (without battery)
The Flex Power Tools GE MH 18.0-EC Giraffe Sander has a brushless motor for greater efficiency and longer service life. Easy to control, thanks to the speed preselection with adjustment wheel. Overload protection, restart lock and temperature monitoring provide additional user safety. An electronic management system (EMS) protects the machine, extends the service life and increases efficiency. It uses an innovative interchangeable head system, so sanding heads are attached and removed with a click. Very handy, lightweight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions. The sander provides effective dust extraction from between the brush ring and the sanding pad, this prevents clogging of the abrasive and promotes a dust-free working environment. Optional connection of the FLEX safety vacuum cleaners to the FLEX Clip System on the guide tube. Supplied as a Bare Unit - No Battery or Charger. Supplied with: 1 x SH-FC Clip-on Quick Clamping Ring 1 x Carrying Bag Specification: Oscillating Speed: 1,150-1,800/min.Sanding Disc Ø: 225mmTool Fixture: Hook & LoopHead Tilt Angle: 100 degreeLength: 1440mmWeight: 2.8kg (without battery)
The Flex Power Tools CF 18.0/230 Fan can run on an 18V Li-ion slide-type battery or via the 230V power supply unit. An electronic management system (EMS) protects the machine, extends the service life and increases efficiency. With stepless air volume regulation and a soft start feature. Can be used in a variety of ways; hook, a 1/4in and 5/8in mount, and a head that can be swivelled through 180 degree. Supplied as a Bare Unit - No Battery or Charger. Specification: Max. Air Speed: 4.9m/sec.Max. Air Flow Rate: 18.25m³/min.Connection Thread: 1/4in and 5/8inSize (W x L x H): 213 x 304 x 400mmWeight: 2.5kg (without battery)
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 14mmWorking Length: 150mmOverall Length: 200mmPack Quantity: 1
Hook & Loop backed perforated sanding discs, which suit the following models: GE 5 / GE 5 R, GSE 5R, WSE 7 Vario Set, WSE 7 Vario Plus, WST 700 VV and WST 700 VV Plus. Size: 225mm.FLX282405 sanding discs have the following specifications:Grit size: P120Application: For rapid sanding and smoothingDiameter: 225mm.
This Gardman Galvanised Wire Netting has the following specification: Length: 10mWidth: 0.9mMesh: 13mm² Gardman Galvanised Wire Netting has various uses around the garden, including fencing and cages as well as a strong support for climbing plants. The hexagon holes are useful for crop protection. Made from flexible and strong self-supporting wire, this galvanised mesh will withstand all weathers throughout the seasons. 5-year guarantee.
Polycell Exterior Polyfilla produces a tough exterior filler, and is suitable for general outdoor filling jobs. The formula sets in 60 minutes to a grey weatherproof finish. It will accept bolts and screws and will not shrink or crack.Size: 1.75kg.
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1/2 x 6 Box 200
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.Colour: Wild Thyme.Size: 5 Litre.
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.Cuprinol Garden Shades has the following specifications: Colour: Sweet Sundae.Size: 1 Litre.
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.Colour: Dusky Gem.Size: 2.5 Litre.
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.This Cuprinol Garden Shades has the following specification: Colour: CornflowerSize: 1 Litre
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.Colour: Country Cream.Size: 5 Litre.
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.Cuprinol Garden Shades has the following specifications: Colour: Coastal Mist.Size: 2.5 Litre.
A highly durable, solvent-borne, highly translucent satin woodstain. Cetol Filter 7 is a highly translucent satin exterior woodstain for windows and doors. It can be used as a maintenance coat for existing woodstain systems or over a base stain of Cetol HLS on new or bare timbers. Cetol Filter 7 is an exterior woodstain for windows and doors, either as a one-coat maintenance application for existing woodstain systems or two coats over a base stain of Cetol HLS on new or bare timbers. Its advanced UV light absorbers provide superior protection from the damaging effects of sunlight on timber. It is not, however, suitable for decking or other areas subjected to high levels of abrasion.
The Footprint Brick Jointer can be used to smooth and shape a mortar joint into a concave shape to keep moisture from penetrating the joint. It is made from carbon steel and is furnace hardened for a longer working life. Its polished finish prevents premature rusting. Size: 12mm (1/2in) x 16mm (5/8in).
IRWIN Jack shallow bladed, round nosed saw for cross cutting, mitre work, PVC, floorboards and similar items. Soft-grip handle with finger guide for maximum comfort in prolonged use. Screwed handle/blade assembly for added safety.Length 330mm (13 in)Teeth: 12 tpi.
The IRWIN® Quick-Grip® Mini Bar Clamps have a revolutionary design and are fast and easy-to-operate. The high-tech resin body is sturdy and temperature resistant, and the 70kg clamping hold load makes for a perfect lightweight 3rd hand. The clamps have non-marking, stay-on pads that protect the work surface. Ideal for smaller jobs and applications in tight working areas. Enhance your clamps with a wide range of Quick-Grip® Clamp Accessories.1 x IRWIN® Quick-Grip® Mini Bar Clamp 150mm (6in)
The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.Size 8mm
The Arctic Hayes Fibre Washer Kit contains a large selection of washers that are ideal for general plumbing. The washers are made from fibre and are supplied in a compartment case for easy identification. Contains the following: 270 x Red Fibre Washers: 9 x 6.4mm, 12.6 x 8.3mm, 16 x 10mm, 17.5 x 11.5mm, 19 x 13.5mm, 22 x 14.6mm & 22 x 17mm.35 x Fibre Washers: 1in, 1/2in & 3/4in.15 x Ball Valve Seating Washers: 1/2in & 3/4in.10 x Top Body Washers: No. 3 & No. 4.
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 200mm Diameter: 10mm Flute Length: 126mm
